There are four ENCRYPT commands:
ENCRYPT Encrypts files. Before you enter
this command, create a key with the
ENCRYPT /CREATE_KEY command.
ENCRYPT /AUTHENTICATE Checks for changes to either plain
text or cipher text files (see
/AUTHENTICATE).
ENCRYPT /CREATE_KEY Defines a key to be used during
encryption (see /CREATE_KEY).
ENCRYPT /REMOVE_KEY Deletes a key definition from a key
storage table (see /REMOVE_KEY).
Format for the ENCRYPT Command
ENCRYPT input-file key-name [qualifiers]
1 – Parameters
input-file
File names of the files to encrypt. If you use wildcard
characters, do not include directory files or files with bad
blocks.
key-name
Key name previously stored in the key storage table with the
ENCRYPT /CREATE_KEY command.
2 – Qualifiers
2.1 /BACKUP
/BACKUP[=time]
Selects files according to the dates of their most recent backup.
This qualifier is relevant only when used with the /BEFORE or the
/SINCE qualifier. In addition, do not use /BACKUP with /EXPIRED
or /MODIFIED.
If you omit time, TODAY is used. For more information on time
specifications, see the OpenVMS User's Manual.
2.2 /BEFORE
/BEFORE[=time]
Selects files that have a creation time before the time you
specify.
If you omit time, TODAY is used. For more information on time
specifications, see the OpenVMS User's Manual.
2.3 /BY_OWNER
/BY_OWNER[=uic]
/NOBY_OWNER
Selects files with the owner UIC you specify.
If you omit uic, the UIC of the current process is used. For
more information on specifying UIC format, see the OpenVMS User's
Manual.
2.4 /COMPRESS
/COMPRESS
/NOCOMPRESS
Optional. Default: /NOCOMPRESS.
Controls whether or not data compression occurs before a file is
encrypted.
2.5 /CONFIRM
/CONFIRM
/NOCONFIRM
Controls whether or not a confirmation request is displayed
before each encryption, as follows:
Response Meaning
YES Encrypts the file
NO or <Return> Does not encrypt the file (default)
QUIT or Does not encrypt the file or any subsequent
<Ctrl/Z> files
ALL Encrypts the file plus all subsequent files
2.6 /DATA_ALGORITHM
{ DESCBC (default) }
/DATA_ALGORITHM= { AESmmmkkk }
{ }
Where mmm is the mode CBC, ECB, CFB, or OFB; and kkk is 128,
192, or 256 bits. Cipher Block Chaining (CBC) and Electronic Code
Book (ECB) are 16-byte block modes, meaning blocks are padded to
16 bytes if necessary during encryption. The padding is removed
during decryption. Cipher Feedback (CFB) and Output Feedback
(OFB) are 8-bit character stream mode emulation, useful in data
communications and where no padding is required.
Note that /DATA_ALGORITM=AES is a shortcut for specifying
AESCBC128.
The data algorithm is used with the randomly generated key to
perform encryption of the file's data. When specifying an AES
algorithm, specify both /KEY and /DATA=AESmmmkkk qualifiers and
use an AES created key.
2.7 /DELETE
/DELETE
/NODELETE
Controls whether or not the input files are deleted after the
encryption operation is complete and the output file is written
and closed. By default, the input file is not deleted.
2.8 /ERASE
/ERASE
/NOERASE
Controls whether or not the input files are erased with the data
security pattern before being deleted. By default, the location
in which the data was stored is not overwritten with the data
security pattern. The /ERASE qualifier must be used with /DELETE.
2.9 /EXCLUDE
/EXCLUDE=file-spec
/NOEXCLUDE
Excludes the specified files from the encryption operation. You
can use wildcard characters. You do not need to enter an entire
file specification. Any field that you omit defaults to the input
file specification.
Because directory files are never encrypted, you need not specify
them.
2.10 /EXPIRED
/EXPIRED[=time]
Selects files according to the dates on which they expire.
This qualifier is relevant only when used with the /BEFORE or the
/SINCE qualifier. In addition, do not use /EXPIRED with /BACKUP
or /MODIFIED.
If you omit time, TODAY is used. For more information on time
specifications, see the OpenVMS User's Manual.
2.11 /KEY_ALGORITHM
{ DESCBC (default) }
/KEY_ALGORITHM= { AESmmmkkk }
{ }
Where mmm is the mode CBC, ECB, CFB, or OFB; and kkk is 128,
192, or 256 bits. Note that /KEY_ALGORITHM=AES is a shortcut for
specifying AESCBC128.
The command uses this key algorithm with the key you supply
to encrypt the randomly generated data encryption key and the
initialization vector stored within the file.
When specifying an AES algorithm, specify both /KEY and /DATA
qualifiers and use an AES created key.
2.12 /MODIFIED
/MODIFIED[=time]
Selects files according to the dates on which they were last
modified.
This qualifier is relevant only when used with the /BEFORE or the
/SINCE qualifier. In addition, do not use /MODIFIED with /BACKUP
or /EXPIRED.
If you omit time, TODAY is used. For more information on time
specifications, see the OpenVMS User's Manual.
2.13 /OUTPUT
/OUTPUT=file-spec
Alternate output file name for the encryption operation. By
default, each input file encrypted is written to a separate
output file that is one version higher than the highest version
of the input file. When using the /OUTPUT qualifier, specify the
parts of the file specification different from the defaults. You
do not need to provide an entire file specification. Any field
that you omit defaults to the input file specification.
2.14 /SHOW
/SHOW=keyword-list
Controls whether or not the following information about the
encryption operation is displayed on SYS$COMMAND:
Keyword Meaning
FILES Displays input and output file names on
SYS$COMMAND
STATISTICS Displays the encryption stream statistics:
o Bytes processed
o Internal records processed
o CPU time consumed within the encryption
algorithm
2.15 /SINCE
/SINCE[=time]
Selects files that have a creation date before the time you
specify.
If you omit time, TODAY is used. For more information on time
specifications, see the OpenVMS User's Manual.
2.16 /STATISTICS
Similar to /SHOW, except that /STATISTICS lists both files and
statistics, whereas /SHOW can be customized to list only one or
the other.
2.17 /VERSION
Displays the version number of the Encryption for OpenVMS
software running on your system.
3 – Examples
1.$ ENCRYPT TROY MYKEY
Encrypts the file TROY using the key MYKEY.
2.$ ENCRYPT NEWFILE.TXT MONET/KEY_ALGORITHM=AESCBC128/DATA_ALGORITHM=AESCBC128
Encrypts the file NEWFILE.TXT with the AES key, MONET, using
the algorithm AESCBC128. A new version, NEWFILE.TXT;n+1,
of the original file (now encrypted) is created. Use the
/OUTPUT=filename qualifier to preserve the original file name,
renaming the encrypted output file.
4 /AUTHENTICATE
Associates a DES algorithm Message Authenticate Code (MAC) value
with one or more files and checks for any modification of either
plain text or cipher text files. Use the additional /UPDATE
qualifier to store each file's MAC in the databases. Use only
the /AUTHENTICATE qualifier to subsequently test the integrity
of the file's data and security attributes. You must create a
DES key prior to updating or checking an existing MAC. The AES
algorithm is not supported for file MAC operations.
Format for the ENCRYPT /AUTHENTICATE Command
ENCRYPT /AUTHENTICATE file-spec key-name [qualifiers]
4.1 – Parameters
file-spec
File names of the files to authenticate. Behavior can be modified
with the /MULTIPLE_FILES qualifier.
key-name
Key name previously stored in the key storage table with the
ENCRYPT /CREATE_KEY command.
4.2 – Qualifiers
4.2.1 /BACKUP
/BACKUP[=time]
Selects files according to the dates of their most recent backup.
This qualifier is relevant only when used with the /BEFORE or the
/SINCE qualifier. In addition, do not use /BACKUP with /EXPIRED
or /MODIFIED.
If you omit time, TODAY is used. For more information on time
specifications, see the OpenVMS User's Manual.
4.2.2 /BEFORE
/BEFORE=time
Selects files that have a creation time before the time you
specify.
If you omit time, TODAY is used. For more information on time
specifications, see the OpenVMS User's Manual.
4.2.3 /BY_OWNER
/BY_OWNER[=uic]
/NOBY_OWNER
Selects files with the owner UIC you specify.
If you omit uic, the UIC of the current process is used. For
more information on specifying UIC format, see the OpenVMS User's
Manual.
4.2.4 /CONFIRM
/CONFIRM
/NOCONFIRM
Controls whether or not a confirmation request is displayed
before each authentication, as follows:
Response Meaning
YES Authenticates the file
NO or <Return> Does not authenticate the file (default)
QUIT or Does not authenticate the file or any subsequent
<Ctrl/Z> files
ALL Encrypts the file plus all subsequent files
4.2.5 /DATABASE
/DATABASE=file-spec
/NODATABASE
File name of the file in which to store binary MAC values.
Generates a MAC using the file contents. If you do not specify a
file name, the file name SYS$LOGIN:ENCRYPT$MAC.DAT is used.
4.2.6 /EXCLUDE
/EXCLUDE=file-spec
/NOEXCLUDE
Excludes the specified files from the authentication operation.
You can use wildcard characters. You do not need to enter an
entire file specification. Any field that you omit defaults to
the input file specification.
Because directory files are never encrypted, you need not specify
them.
4.2.7 /EXPIRED
/EXPIRED[=time]
Selects files according to the dates on which they expire.
This qualifier is relevant only when used with the /BEFORE or the
/SINCE qualifier. In addition, do not use /EXPIRED with /BACKUP
or /MODIFIED.
If you omit a time value, TODAY is used. For more information on
time specifications, see the OpenVMS User's Manual.
4.2.8 /LOG
Displays the results of the authentication operation.
4.2.9 /MODIFIED
/MODIFIED[=time]
Selects files according to the dates on which they were last
modified.
This qualifier is relevant only when used with the /BEFORE or the
/SINCE qualifier. In addition, do not use /MODIFIED with /BACKUP
or /EXPIRED.
If you omit a time value, TODAY is used. For more information on
time specifications, see the OpenVMS User's Manual.
4.2.10 /MULTIPLE_FILES
Indicates that the file-spec parameter contains a list of file
names to be checked. The file-spec file is opened and each record
is read and treated as a file-spec.
4.2.11 /OUTPUT
/OUTPUT=file-spec
/NOOUTPUT
File name of the file in which to store readable MAC values.
These MAC values represent both the file contents as well as the
security settings. If you do not specify a file name, the default
file name SYS$LOGIN:ENCRYPT$MAC.LIS is used.
4.2.12 /SECURITY
/SECURITY=file-spec
/NOSECURITY
File name of the file in which to store binary MAC values. If you
do not specify a file name, the default file name ENCRYPT$SEC.DAT
is used.
Generates a MAC using the file's security settings: owner,
protection settings, and optional ACL.
4.2.13 /SINCE
/SINCE[=time]
Selects files that have a creation time before the time you
specify.
If you omit time, TODAY is used. For more information on time
specifications, see the OpenVMS User's Manual.
4.2.14 /UPDATE
/UPDATE
/NOUPDATE
Associates new MAC values with one or more files.
4.3 – Example
$ ENCRYPT /AUTHENTICATE NEWFILE HAMLET/CONFIRM
Associates a MAC with the file NEWFILE using the key HAMLET.
This command also displays a confirmation request before each
authentication.
$ ENCRYPT/AUTHENTICATE/UPDATE *.* MYKEY
%ENCRYPT-NEWDB, new authentication code database has been created
%ENCRYPT-NEWSECDB, new authentication security settings database has been created
%ENCRYPT-I-SUMMARY1, Summary: Files successfully authenticated: 0
%ENCRYPT-I-SUMMARY2, Files failing authentication: 0
%ENCRYPT-I-SUMMARY3, Files not in database: 73
%ENCRYPT-I-SECSUMM1, Summary: Security settings authenticated: 0
%ENCRYPT-I-SECSUMM2, Security settings failing authentication: 0
%ENCRYPT-I-SECSUMM3, Security settings not in database: 73
This example creates a MAC for each file in the current
directory using the key named MYKEY, storing them in the two
databases: SYS$LOGIN:ENCRYPT$MAC.DAT and ENCRYPT$SEC_MAC.DAT.
$ ENCRYPT /AUTHENTICATE *.* MYKEY
%ENCRYPT-I-NOUPDATE, database will not be updated with new authentication codes
%ENCRYPT-I-SUMMARY1, Summary: Files successfully authenticated: 73
%ENCRYPT-I-SUMMARY2, Files failing authentication: 0
%ENCRYPT-I-SUMMARY3, Files not in database: 0
%ENCRYPT-I-SECSUMM1, Summary: Security settings authenticated: 73
%ENCRYPT-I-SECSUMM2, Security settings failing authentication: 0
%ENCRYPT-I-SECSUMM3, Security settings not in database: 0
This example authenticates the same files as in Example 3
by creating a new MAC and comparing that with those in each
database, testing file data integrity and security attributes
as indicated in the summary.
5 /CREATE_KEY
Creates a key definition name and value to be used for encrypting
and decrypting files. The key is a string that represents the
name under which its value is encrypted and stored in the key
storage table; a logical name table. A DES key is created in the
PROCESS logical name table by default unless the /AES qualifier
is specified. Note that AES requires longer key-length values
than the 8-byte DES keys. AES requires a minimum of 16, 24,
or 32 bytes depending on the algorithm/key size specified for
encryption or decryption.
Format for the ENCRYPT /CREATE_KEY Command
ENCRYPT /CREATE_KEY key-name key-value [qualifiers]
5.1 – Parameters
key-name
Name under which the encryption key will be stored in the key
storage table. Specify a character string according to the
following conventions:
o 1 to 243 alphanumeric characters
o Dollar signs and underscores are valid.
o Not case sensitive
Use a name that has meaning to you, to help you remember it.
NOTE
Key names beginning with ENCRYPT$ are reserved for HP.
key-value
String representing the value of the encryption key. Specify
either ASCII text or a hexadecimal constant, as follows:
o ASCII text string (default)
- Minimum length: 8 (DES) 16, 24, or 32 (AES-128, 192, and
256 bits respectively).
- Maximum length: approximately 240 characters.
- The string is not case sensitive for DES keys.
- If you use characters other than alphanumeric characters,
for example, blank spaces, enclose the string in quotation
marks ( " " ).
o Hexadecimal constant
- Use the /HEXADECIMAL qualifier.
- Valid characters: 0 to 9, A to F (ASCII coded HEX nibbles).
- Minimum length: 16 characters-DES-32, 48, or 64 (AES-128,
192, and 256 bits respectively).
- Do not enclose the value in quotation marks.
5.2 – Qualifiers
5.2.1 /AES
Designates that an AES key is to be created, which is encrypted
with the AESCBC128 encryption routine.
5.2.2 /GROUP
Enters the key definition in the group key storage table.
5.2.3 /HEXADECIMAL
/HEXADECIMAL
/NOHEXADECIMAL
Specifies that the value for the key is a hexadecimal number.
Default: key values are interpreted as ASCII text characters (see
the description of the key-value parameter).
5.2.4 /JOB
Enters the key definition in the job key storage table.
5.2.5 /LOG
Verifies successful creation of the key.
5.2.6 /PROCESS
Enters the key definition in the process key storage table.
5.2.7 /SYSTEM
Enters the key definition in the system key storage table.
5.3 – Examples
1.$ ENCRYPT /CREATE_KEY HAMLET
_ Key value: "And you yourself shall keep the key of it"
This example defines a DES key named HAMLET with the character
string value "And you yourself shall keep the key of it".
2.$ ENCRYPT /CREATE_KEY /HEXADECIMAL ARCANE 2F4A98F46BBC11DC
This example defines a DES key named ARCANE with hexadecimal
value of 2F4A98F46BBC11DC.)
3.$ ENCRYPT /CREATE_KEY MYKEY "The 16 char. key" /LOG/AES
This example defines an AES key named MYKEY with the minimum
16-character string value "The 16 char. key" that is required
for AESxxx128, logging its successful creation. The key is
encrypted with AES prior to storage in the PROCESS (default)
logical name table.
4.$ SHOW LOGICAL ENC* /TABLE=ENCRYPT$KEY_STORE
LNM$PROCESS_TABLE
"ENCRYPT$KEY$MYKEY" = "ê¢É.à0S%M.....ÕSBò¼¶í.}â0ÓL.ñ.Z"
LNM$JOB_8210B400
LNM$GROUP_000001
ENCRYPT$SYSTEM
This example shows that key names are prepended with
ENCRYPT$KEY$, as in the named key ENCRYPT$KEY$MYKEY.
6 /REMOVE_KEY
Deletes a key definition from a key storage table. The PROCESS
logical name table is the default unless otherwise specified.
Format for the ENCRYPT /REMOVE_KEY Command
ENCRYPT /REMOVE_KEY key-name [qualifiers]
6.1 – Parameters
key-name
Key name previously stored in the key storage table with the
ENCRYPT /CREATE_KEY command.
6.2 – Qualifiers
6.2.1 /AES
Designates that an AES key is to be deleted. Specifying a unique
key name and table is sufficient for deletion, making the /AES
qualifier unnecessary but included for clarification.
6.2.2 /GROUP
Deletes the key definition from the group key storage table.
6.2.3 /JOB
Deletes the key definition from the job key storage table.
6.2.4 /PROCESS
Deletes the key definition from the process key storage table.
6.2.5 /SYSTEM
Deletes the key definition from the system key storage table.
6.3 – Example
$ ENCRYPT /REMOVE_KEY MYKey /AES
This command removes or deletes the AES key, MYKEY.