Queues one or more files for printing to an output queue.
Requires read (R) access to the file and submit (S) access to the
queue.
To specify functions unique to particular print symbionts, use
the /PARAMETERS qualifier.
For information on parameters available for printing to
PostScript printers using DECprint Supervisor software (DCPS),
see the DCL Help topic PRINT_Parameter.
Format
PRINT filespec[,...]
1 – Parameter
filespec[,...]
Specifies one or more files to be printed. The asterisk (*)
and the percent sign (%) wildcard characters are allowed in the
directory specification, file name, file type, and version number
fields. The default file type is that of the preceding file. If
no previous file specification contains an explicit file type,
the default file type is .LIS.
If you specify more than one file, separate the file
specifications with either commas (,) or plus signs (+).
If you specify a node name, you must use the /REMOTE qualifier.
2 – Qualifiers
2.1 /AFTER
/AFTER=time
/NOAFTER
Holds the job until the specified time. The time can be specified
as absolute time or a combination of absolute and delta times.
If the specified time has passed, the job is queued for printing
immediately.
For complete information on specifying time values, see the
OpenVMS User's Manual or the online help topic Date.
2.2 /BACKUP
/BACKUP
/NOBACKUP
Modifies the time value specified with the /BEFORE or the
/SINCE qualifier. The /BACKUP qualifier selects files according
to the dates of their most recent backups. This qualifier
is incompatible with the /CREATED, /EXPIRED, and /MODIFIED
qualifiers, which also allow you to select files according
to time attributes. If you specify none of these four time
qualifiers, the default is the /CREATED qualifier.
2.3 /BEFORE
/BEFORE[=time]
/NOBEFORE
Selects only those files dated prior to the specified time. You
can specify time as absolute time, as a combination of absolute
and delta times, or as one of the following keywords: BOOT,
LOGIN, TODAY (default), TOMORROW, or YESTERDAY. Specify one of
the following qualifiers with the /BEFORE qualifier to indicate
the time attribute to be used as the basis for selection:
/BACKUP, /CREATED (default), /EXPIRED, or /MODIFIED.
For complete information on specifying time values, see the
OpenVMS User's Manual or the online help topic Date.
2.4 /BURST
/BURST[=keyword]
/NOBURST
Positional qualifier.
Controls whether two file flag pages with a burst bar between
them are printed preceding a file. If the /BURST qualifier is
specified between the PRINT command and the file specifications,
it can take either of the following keywords:
ALL Prints the flag pages and a burst bar before each file in
the job.
ONE Prints the flag pages and a burst bar before the first
file in the job.
If you want the /BURST qualifier to apply to individual files
in a multifile job, place the qualifier directly after each file
that you want to have the flag pages and a burst bar.
Use the /[NO]BURST qualifier to override the /DEFAULT options
that have been set for the output queue you are using. The
/[NO]BURST qualifier does not override the /SEPARATE options
set for the queue.
When you specify the /BURST qualifier for a file, the /[NO]FLAG
qualifier does not add or subtract a flag page from the two flag
pages that are printed preceding a file.
2.5 /BY_OWNER
/BY_OWNER[=uic]
/NOBY_OWNER
Selects only those files whose owner user identification code
(UIC) matches the specified owner UIC. The default UIC is that of
the current process.
Specify the UIC by using standard UIC format as described in the
HP OpenVMS Guide to System Security.
2.6 /CHARACTERISTICS
/CHARACTERISTICS=(characteristic[,...])
Specifies the name or number of one or more characteristics to be
associated with the job. Characteristics can refer to such things
as color of ink. If you specify only one characteristic, you can
omit the parentheses.
A characteristic's number must range from 0 to 127. To see which
characteristics have been defined for your system, use the SHOW
QUEUE/CHARACTERISTICS command. To see which characteristics
are associated with a particular queue, use the SHOW QUEUE/FULL
command.
A print job can be processed on an execution queue if the job's
characteristics are a subset of the queue's characteristics.
However, if any of the characteristics associated with the job
are not associated with the queue, the job remains pending until
one or more of the following occurs:
o The characteristics specified with the queue are changed
to make the job's characteristics a subset of the
queue's characteristics (using, for example, the SET
QUEUE/CHARACTERISTICS command).
o The characteristics specified with the job are changed
to make the job's characteristics a subset of the
queue's characteristics (using, for example, the SET
ENTRY/CHARACTERISTICS command).
o The job is moved to a queue on which all the job's
characteristics have been specified (using, for example, the
SET ENTRY/REQUEUE command).
o The job is deleted (using, for example, the DELETE/ENTRY
command).
2.7 /CONFIRM
/CONFIRM
/NOCONFIRM (default)
Controls whether a request is issued before each file is queued
for printing to confirm that the operation should be performed on
that file. The following responses are valid:
YES NO QUIT
TRUE FALSE Ctrl/Z
1 0 ALL
<Return>
You can use any combination of uppercase and lowercase letters
for word responses. Word responses can be abbreviated to one or
more letters (for example, T, TR, or TRU for TRUE), but these
abbreviations must be unique. Affirmative answers are YES, TRUE,
and 1. Negative answers include: NO, FALSE, 0, and pressing
Return. Entering QUIT or pressing Ctrl/Z indicates that you want
to stop processing the command at that point. When you respond by
entering ALL, the command continues to process, but no further
prompts are given. If you type a response other than one of
those in the list, DCL issues an error message and redisplays
the prompt.
2.8 /COPIES
/COPIES=n
Positional qualifier.
Specifies the number of copies to print. The value of the
parameter n can be from 1 to 255 and defaults to 1. If you place
the /COPIES qualifier after the PRINT command name, each file in
the parameter list is printed the specified number of times. If
you specify the /COPIES qualifier following a file specification,
only that file is printed the specified number of times.
2.9 /CREATED
/CREATED (default)
/NOCREATED
Modifies the time value specified with the /BEFORE or the /SINCE
qualifier. The /CREATED qualifier selects files based on their
dates of creation. This qualifier is incompatible with the
/BACKUP, /EXPIRED, and /MODIFIED qualifiers, which also allow
you to select files according to time attributes. If you specify
none of these four time qualifiers, the default is the /CREATED
qualifier.
2.10 /DELETE
/DELETE
/NODELETE (default)
Positional qualifier.
Controls whether files are deleted after printing. If you place
the /DELETE qualifier after the PRINT command name, all specified
files are deleted. If you specify the /DELETE qualifier after
a file specification, only that file is deleted after it is
printed.
The protection applied to the file must allow delete (D) access
for the life of the job. You need to have delete access when you
submit the job and delete access when the system deletes your
file at the end of the job.
2.11 /DEVICE
/DEVICE=queue-name[:]
Places the print job in the specified queue (rather than the
default queue SYS$PRINT). This qualifier is synonymous with the
/QUEUE qualifier, except that the /DEVICE qualifier is reserved
for special use by HP. Its usage, therefore, is not recommended.
2.12 /EXCLUDE
/EXCLUDE=(filespec[,...])
/NOEXCLUDE
Excludes the specified files from the print operation. You can
include a directory but not a device in the file specification.
The asterisk (*) and the percent sign (%) wildcard characters
are allowed in the file specification; however, you cannot use
relative version numbers to exclude a specific version. If you
specify only one file, you can omit the parentheses.
2.13 /EXPIRED
/EXPIRED
/NOEXPIRED
Modifies the time value specified with the /BEFORE or the /SINCE
qualifier. The /EXPIRED qualifier selects files according to
their expiration dates. (The expiration date is set with the
SET FILE/EXPIRATION_DATE command.) The /EXPIRED qualifier
is incompatible with the /BACKUP, /CREATED, and /MODIFIED
qualifiers, which also allow you to select files according
to time attributes. If you specify none of these four time
qualifiers, the default is the /CREATED qualifier.
2.14 /FEED
/FEED
/NOFEED
Positional qualifier.
Controls whether form feeds are inserted into the print job when
the printer reaches the bottom margin of the form in use. You can
suppress this automatic form feed (without affecting any of the
other carriage control functions that are in place) by using the
/NOFEED qualifier. The /[NO]FEED qualifier does not affect user-
formatted files and can be used to override the installation-
defined defaults that have been set for the output queue you are
using.
2.15 /FLAG
/FLAG[=keyword]
/NOFLAG
Positional qualifier.
Controls whether a file flag page is printed preceding a file.
The flag page contains the name of the user submitting the job,
the job entry number, and other information about the file being
printed. If the /FLAG qualifier is positioned between the PRINT
command and the file specifications, it can take either of the
following keywords:
ALL Prints a file flag page before each file in the job.
ONE Prints a file flag page before the first file in the job.
If you want the /FLAG qualifier to apply to individual files in a
multifile job, place the qualifier directly after each file that
you want to have a flag page.
Use the /[NO]FLAG qualifier to override the /DEFAULT=[NO]FLAG
option that has been set for the output queue you are using.
The /[NO]FLAG qualifier does not override the /SEPARATE=[NO]FLAG
option set for the queue.
When you specify the /BURST qualifier for a file, the /[NO]FLAG
qualifier does not add or subtract a flag page from the two flag
pages that are printed preceding the file.
2.16 /FORM
/FORM=form
Specifies the name or number of the form to be associated with
the print job. If you omit the /FORM qualifier, the default form
for the execution queue is associated with the job.
Forms have attributes such as print image width and length or
paper stock, which the print symbiont associates with a job when
the job is processed. To see which forms have been defined for
your system, use the SHOW QUEUE/FORM command. To find out which
form is mounted currently on a particular queue and which form is
specified as that queue's default form, use the SHOW QUEUE/FULL
command.
The stock of the form associated with the job must match the
stock of the form mounted on the execution queue on which you
want the job to be processed. If the stocks do not match, the job
remains pending until one or more of the following occurs:
o A form with the same stock as the job's form is mounted on
the queue (using, for example, the SET QUEUE/FORM_MOUNTED
command).
o A form with the same stock as the queue's mounted form is
specified with the job (using, for example, the SET ENTRY/FORM
command).
o The job is moved to a queue on which the stock of the mounted
form matches the stock of the job's form (using, for example,
the SET ENTRY/REQUEUE command).
o The job is deleted (using, for example, the DELETE/ENTRY
command).
2.17 /HEADER
/HEADER
/NOHEADER (default)
Positional qualifier.
Controls whether a heading line is printed at the top of each
page.
2.18 /HOLD
/HOLD
/NOHOLD (default)
Controls whether a job is available for printing immediately.
The /HOLD qualifier holds the job until released by a SET
ENTRY/RELEASE or SET ENTRY/NOHOLD command.
2.19 /IDENTIFY
/IDENTIFY (default)
/NOIDENTIFY
Displays the job name, queue name, entry number, and status of
the job when it is queued.
2.20 /JOB_COUNT
/JOB_COUNT=n
Prints the job n times. The value of the parameter n can be from
1 to 255 and defaults to 1.
2.21 /LOWERCASE
/LOWERCASE
/NOLOWERCASE (default)
Indicates whether the print job must be printed on a printer that
can print both lowercase and uppercase letters. The /NOLOWERCASE
qualifier means that files can be printed on printers supporting
only uppercase letters. If all available printers can print both
uppercase and lowercase letters, you do not need to specify the
/LOWERCASE qualifier.
2.22 /MODIFIED
/MODIFIED
/NOMODIFIED
Modifies the time value specified with the /BEFORE or the /SINCE
qualifier. The /MODIFIED qualifier selects files according to
the dates on which they were last modified. This qualifier
is incompatible with the /BACKUP, /CREATED, and /EXPIRED
qualifiers, which also allow you to select files according
to time attributes. If you specify none of these four time
modifiers, the default is the /CREATED qualifier.
2.23 /NAME
/NAME=job-name
Names the job. The name consists of 1 to 39 alphanumeric
characters. If characters other than alphanumerics, underscores
(_), or dollar signs ($) are used in the name, enclose the name
in quotation marks (" "). The default is the name of the first
(or only) file in the job. The job name appears in the SHOW ENTRY
and SHOW QUEUE command display and is printed on the flag page
for the job.
2.24 /NOTE
/NOTE=string
Specifies a message string of up to 255 characters to appear on
the flag page of the job.
2.25 /NOTIFY
/NOTIFY
/NONOTIFY (default)
Controls whether a message is broadcast to your terminal session
when the job is printed or aborted.
2.26 /OPERATOR
/OPERATOR=string
Specifies a message of up to 255 characters to be sent to the
operator when the job begins to print.
2.27 /PAGES
/PAGES=([lowlim,]uplim)
Positional qualifier.
Specifies the number of pages to print for the specified job. You
can use the /PAGES qualifier to print portions of long files. By
default, all pages of the file are printed.
The lowlim specifier refers to the first page in the group of
pages that you want printed for that file. If you omit the lowlim
specifier, the printing starts on the first page of the file.
The uplim specifier refers to the last page of the file that you
want printed. If you want to print to the end of the file, but
do not know how many pages the file contains, use quotation marks
(" ") as the uplim specifier. You can omit the parentheses if
you are including only a specific value for the uplim specifier.
For example, /PAGES=10 prints the first ten pages of the file;
/PAGES=(5,10) prints pages 5 through 10; /PAGES=(5,"") starts
printing at page 5 in the file and continues until the end of the
file is reached.
2.28 /PARAMETERS
/PARAMETERS=(parameter[(=value[,...])] [,...])
Specifies from 1 to 8 optional parameters that are unique to a
particular print symbiont. Each parameter and its values are
passed as a single text string directly to the print symbiont:
logical names and DCL symbols are not translated by the PRINT
command.
Each parameter can take from 1 to 8 values for a total of 255
characters. If you specify only one parameter or parameter value,
you can omit the parentheses. Enclose parameter values containing
lowercase letters or nonalphanumeric characters (such as spaces,
parentheses, or commas) in quotation marks.
You can specify the /PARAMETERS qualifier only once in each PRINT
command. For example, in the command PRINT /PARAMETERS=(JJJ,KK)
/PARAMETERS=(LL,MMM), the JJJ and KK are ignored because the
second occurrence of the /PARAMETERS qualifier supersedes the
first occurrence.
For information on parameters available for printing to
PostScript printers using DECprint Supervisor software (DCPS),
see the DCL Help topic PRINT_Parameter.
2.29 /PASSALL
/PASSALL
/NOPASSALL (default)
Positional qualifier.
Specifies whether the symbiont bypasses all formatting and
sends the output QIO to the driver with format suppressed. All
qualifiers affecting formatting, as well as the /HEADER, /PAGES,
and /SETUP qualifiers, are ignored.
If the /PASSALL qualifier is placed between the PRINT command and
any file specifications, all files are printed in PASSALL mode.
To specify the /PASSALL qualifier for only some files in the
job, place the qualifier after each file that you want printed in
PASSALL mode.
2.30 /PRIORITY
/PRIORITY=n
Requires OPER (operator) or ALTPRI (alter priority) privilege
to raise the priority above the queue's maximum scheduling
priority.
Specifies the job-scheduling priority of the print job. The value
of the parameter n can be from 0 through 255, where 0 is the
lowest priority and 255 is the highest. The default value of n
is the value of the system parameter DEFQUEPRI. No privilege
is needed to set the priority lower than the queue's maximum
scheduling priority.
2.31 /QUEUE
/QUEUE=queue-name[:]
Queues the job to the specified output queue. The default queue
is SYS$PRINT. This qualifier is synonymous with the /DEVICE
qualifier.
2.32 /REMOTE
Queues the job to SYS$PRINT on the remote node specified in the
file specification; the file must exist on the remote node. When
you use the /REMOTE qualifier, you must include the node name in
the file specification.
You can specify only the following qualifiers with the /REMOTE
qualifier:
/BACKUP
/BEFORE
/BY_OWNER
/CONFIRM
/CREATED
/EXCLUDE
/EXPIRED
/MODIFIED
/SINCE
Note that, unlike the printing on the local node, multiple files
queued by a single PRINT/REMOTE command are considered separate
jobs.
2.33 /RESTART
/RESTART (default)
/NORESTART
Indicates whether a job restarts after a system failure or after
a STOP/QUEUE/REQUEUE command.
2.34 /RETAIN
/RETAIN=option
Specifies the circumstances under which you want your jobs to be
retained in a queue. When a job is retained in the queue, you can
issue the SHOW QUEUE command after the job completes to see the
status of the job. Without job retention, no record of a job is
left in a queue after a job completes.
Use the following options to specify job retention:
o ALWAYS--Holds the job in the queue regardless of the job's
completion status.
o DEFAULT--Holds the job in the queue as specified by the
queue's retention policy.
o ERROR--Holds the job in the queue only if the job completes
unsuccessfully.
o UNTIL=time-value--Holds the job in the queue for the specified
length of time, regardless of the job's completion status.
NOTE
You cannot specify a /NORETAIN qualifier with the PRINT
command (as system managers can with the commands
INITIALIZE/QUEUE, START/QUEUE, and SET QUEUE); however,
you can specify /RETAIN=DEFAULT with the PRINT command. The
default option holds the job in the queue as specified by
the queue's retention policy. If the system manager has not
specified retention for the queue, the job is not retained.
How Job Retention Is Determined
Although you can specify job retention options for your own jobs,
the job retention option you specify may be overridden by the job
retention option of the queue on which your job executed. If you
submit or print a job to a generic queue, the generic queue's job
retention setting may also override the job retention option you
specify. This section describes how job retention is determined.
An execution queue's job retention setting takes precedence
over a generic queue's job retention setting; however, if the
job's completion status does not match the job retention setting
(if any) on the execution queue, then the generic queue's job
retention setting attempts to control job retention. If the job's
completion status does not match the job retention setting (if
any) on the generic queue, then the user-specified job retention
setting is used. Jobs submitted directly to execution queues are
not affected by job retention settings on generic queues.
If the execution queue's retention setting applies, the job is
retained on the execution queue. Likewise, if the generic queue's
retention setting applies, the job is retained on the generic
queue. If the user-specified setting applies, the job is retained
in the queue to which it was submitted.
The following example illustrates how the queue manager
determines job retention:
Suppose you submit a job to a generic queue and specify
/RETAIN=ALWAYS, and the job completes successfully.
First, the queue manager compares the job's completion status
to the execution queue's retention setting. Suppose the queue
is set with /RETAIN=ERROR (retains only jobs that complete
unsuccessfully). The job is not retained in the execution queue
because the error condition was not met.
The queue manager then compares the job's completion status to
the generic queue's retention setting. Suppose the generic queue
has no retention setting. The queue manager's comparison again
fails to retain the job.
Finally, the queue manager compares the job's completion
status to the retention setting you specified for the job. This
comparison reveals that the job should be retained. Because the
user-specified setting leads the queue manager to retain the job,
the job is held in the queue to which the job was submitted-in
this case, the generic queue.
For more information on types of queues, see the INITIALIZE/QUEUE
command. For more information on setting retention options for
queues, see the INITIALIZE/QUEUE, START/QUEUE, or SET QUEUE
command.
Timed Retention
Timed retention, which you specify using the UNTIL=time-value
option, allows you to retain a job in the queue only as long as
you need it. This eliminates the need to delete the job from the
queue later.
For example, the following command retains the print job MYFILE
in the queue until 7:31 on December 14, when the job will
automatically be deleted from the queue.
$ PRINT/RETAIN=UNTIL=14-DEC-2001:07:31:0.0 MYFILE.DAT
However, depending on the queue's job retention policy, the
job might be retained indefinitely. The job retention policy
set on the queue takes precedence over the user-specified job
retention setting. Because system managers cannot specify timed
job retention for a queue, any jobs retained as a result of a
queue's setting are retained indefinitely.
If you specify the /RETAIN=UNTIL=time-value option, you must
supply a time value. The time value is first interpreted
as a delta time, then as a combination time, and finally
as absolute time. If you specify a delta time, the delta
begins when the job completes. For example, if you specify
PRINT/RETAIN=UNTIL="+3:00", the job will be retained for three
hours after the job completes. For information on specifying time
values, see the OpenVMS User's Manual.
2.35 /SETUP
/SETUP=module[,...]
Extracts the specified modules from the device control library
(containing escape sequence modules for programmable printers)
and copies the modules to the printer before a file is printed.
By default, no device control modules are copied.
Note that the module names are not checked for validity until the
time that the file is actually printed; therefore, PRINT/SETUP
is susceptible to typing errors and other mistakes. It is
recommended only for experimental setups.
For production setups, see DEFINE/FORM/SETUP.
2.36 /SINCE
/SINCE[=time]
/NOSINCE
Selects only those files dated on or after the specified time.
You can specify time as absolute time, as a combination of
absolute and delta times, or as one of the following keywords:
BOOT, JOB_LOGIN, LOGIN, TODAY (default), TOMORROW, or YESTERDAY.
Specify one of the following qualifiers with the /SINCE qualifier
to indicate the time attribute to be used as the basis for
selection: /BACKUP, /CREATED (default), /EXPIRED, or /MODIFIED.
For complete information on specifying time values, see the
OpenVMS User's Manual or the online help topic Date.
2.37 /SPACE
/SPACE
/NOSPACE (default)
Positional qualifier.
Controls whether print job output is double-spaced. The default
is single-spaced output.
2.38 /STYLE
/STYLE=keyword
Specifies the file name format for display purposes.
The valid keywords for this qualifier are CONDENSED and EXPANDED.
Descriptions are as follows:
Keyword Explanation
CONDENSED Displays the file name representation of what is
(default) generated to fit into a 255-length character string.
This file name may contain a DID or FID abbreviation
in the file specification.
EXPANDED Displays the file name representation of what is
stored on disk. This file name does not contain any
DID or FID abbreviations.
The keywords CONDENSED and EXPANDED are mutually exclusive. This
qualifier specifies which file name format is displayed in the
output message, along with the confirmation if requested.
File errors are displayed with the CONDENSED file specification
unless the EXPANDED keyword is specified.
See the OpenVMS User's Manual for more information.
2.39 /SYMLINK
/SYMLINK=keyword
The valid keywords for this qualifier are [NO]WILDCARD and
[NO]ELLIPSIS. Descriptions are as follows:
Keyword Explanation
WILDCARD Indicates that symlinks are enabled during wildcard
searches.
NOWILDCARD Indicates that symlinks are disabled during directory
wildcard searches.
ELLIPSIS Equivalent to WILDCARD (included for command
symmetry).
NOELLIPSIS Indicates that symlinks are matched for all wildcard
fields except for ellipsis.
If the file named in the PRINT command is a symlink, the command
operates on the symlink target.
2.40 /TRAILER
/TRAILER[=keyword]
/NOTRAILER
Positional qualifier.
Controls whether a file trailer page is printed at the end of
a file. The trailer page displays the job entry number as well
as information about the user submitting the job and the files
being printed. If the /TRAILER qualifier is positioned between
the PRINT command and the file specifications, it can take either
of the following keywords:
ALL Prints a file trailer page after each file in the job.
ONE Prints a file trailer page after the last file in the
job.
If you want the /TRAILER qualifier to apply to individual files
in a multifile job, place the qualifier directly after each file
that you want to have a trailer page.
Use the /[NO]TRAILER qualifier to override the
/DEFAULT=[NO]TRAILER option that has been set for the output
queue you are using. The /[NO]TRAILER qualifier does not override
the /SEPARATE=[NO]TRAILER option set for the queue.
2.41 /USER
/USER=username
Requires CMKRNL (change mode to kernel) privilege and read (R)
and write (W) access to the user authorization file (UAF).
Allows you to print a job on behalf of another user. The print
job runs exactly as if that user had submitted it. The print
job runs under that user's user name and user identification
code (UIC), and accounting information is logged to that user's
account. By default, the user identification comes from the
requesting process. The user name qualifier value can be any
user name that is valid on your system. The name must be 1 to 12
alphanumeric characters.
3 – Examples
1.$ PRINT/QUEUE=LPB0/COPIES=10/AFTER=20 RESUME
Job RESUME (queue LPB0, entry 239) holding until 14-DEC-2001 20:00
The PRINT command in this example queues 10 copies of the file
RESUME.LIS to printer LPB0, but requests that the copies not be
printed until after 8:00 P.M.
2.$ PRINT THETA.TXT + BETA/FLAG + GAMMA/FLAG + *.LIS/FLAG
Job THETA (queue SYS$PRINT, entry 237) pending
The PRINT command in this example submits the files THETA.TXT,
BETA.TXT, GAMMA.TXT, and the highest versions of all files with
the file type .LIS as a single print job. Flag pages separate
the individual files. Notice that the file type for BETA and
GAMMA is .TXT, the file type of the first file in the list.
3.$ PRINT/LOWERCASE THETA.TXT/COPIES=2, -
_$BETA.DOC/COPIES=3
Job THETA (queue SYS$PRINT, entry 240) pending
The print job queued by the PRINT command in this example
consists of two copies of THETA.TXT followed by three copies
of BETA.DOC. This job must be printed on a printer that can
print lowercase letters. If no such printer is available, the
job waits in the queue.
4.$ PRINT/JOB_COUNT=3 THETA.TXT,BETA/NOIDENTIFY
The PRINT command in this example concatenates the files
THETA.TXT and BETA.TXT into a single print job and prints three
copies of the job. The /NOIDENTIFY qualifier requests that the
job entry number and queue name not be displayed.
5.$ COPY REPORT.MEM NODE3::
$ PRINT/REMOTE NODE3::REPORT.MEM
In this example, the two commands are entered at a node other
than NODE3. The COPY command copies the file REPORT.MEM from
the current node to the NODE3 node. The PRINT command queues
the file REPORT.MEM located on the NODE3 node for printing at
the NODE3 node. The job entry number and queue name are not
displayed when the /REMOTE qualifier is used.
6.$ PRINT/HOLD MASTER.DOC
Job MASTER (queue SYS$PRINT, entry 540) holding
.
.
.
$ SET ENTRY 540/RELEASE
The PRINT command in this example queues a copy of the file
MASTER.DOC to the default printer in a hold status. Later,
the SET ENTRY command releases the hold status on the file and
makes it available for printing.
7.$ PRINT TEST.TXT
Job TEST.TXT (queue SYS$PRINT, entry 867) started on LPA0
$ SHOW ENTRY '$ENTRY'
Entry Jobname Username Blocks Status
----- ------- -------- ------ ------
867 TEST.TXT Nisslert 135 Printing
Submitted 10-DEC-2001 11:07 /FORM=DEFAULT /PRIORITY=100
File: $5$DUA174:[NISSLERT]TEST.TXT;3
The PRINT command in this system example queues a copy of the
file TEST.TXT to the default printer. It also creates the local
symbol $ENTRY to store the job entry number. The SHOW ENTRY
command requests a display of the entry using the symbol $ENTRY
to identify it.
8.$ PRINT/RETAIN=UNTIL=1 MYFILE.DAT
.
.
.
$ SHOW QUEUE DOC$LN03
Server queue DOC$LN03, stopped, on NEWTON::, mounted form DEFAULT
Entry Jobname Username Blocks Status
----- ------- -------- ------ ------
436 MYFILE MIGDAL 8 Retained until 11-DEC-2001 16:56
%JBC-F-JOBABORT, job aborted during execution
Completed 11-DEC-2001 15:56 on queue DOC$LN03
The SHOW QUEUE display in this system example includes the date
and time at which a retained job completed and the queue on
which it executed. The user set job retention to be one hour
after job completion. Depending on the queue's job retention
policy, the job might be deleted from the queue at 16:56.
9. PRINT /PARAMETERS=AAA=123
This command passes the parameter AAA=123 to the print
symbiont. The interpretation of the parameter is dependent
on the symbiont.
10$ PRINT /PARAMETERS=(ddd,"e,(F=(3,4),g),h)",iii)
This command passes three parameters to the print symbiont:
DDD, "e,(F=(3,4),g),h)", and III. The use of the quotes around
the second parameter allows the use of nested parentheses,
commas, and the preservation of alphabetic case. This parameter
value is perfectly acceptable to the PRINT command, even though
it is apt to subsequently be rejected by the print symbiont.
11.PRINT /PARAMETERS=("N,O,P,Q,R,S,T",U,V)
This command passes three parameters to the print symbiont:
"N,O,P,Q,R,S,T", U, and V. Depending on the parsing
capabilities of the symbiont and the length of the parameters
(each parameter is limited to 255 characters), this may be a
workaround to the limitation of eight parameters.