VMS Help  —  RUNOFF  file  Qualifiers

1    /BACKSPACE

    Positional qualifier.

    Controls whether DSR uses the ASCII backspace character to
    perform character-by-character overprinting. By default, DSR
    performs line-by-line overprinting.

2    /BOLD

       /BOLD[=n]
       /NOBOLD

    Positional qualifier.

    Specifies the number of times characters are overstruck in
    a bolding operation. You can specify the number of times
    DSR overprints flagged text by stating a value for n. The
    value n must be 0 or a positive integer and defaults to 1.
    A specification of /BOLD=0 or /NOBOLD disables all boldface
    printing, even if the appropriate flags are recognized and
    enabled.

3    /CHANGE_BARS

       /CHANGE_BARS[=character]
       /NOCHANGE_BARS

    Positional qualifier.

    Controls whether DSR generates change bars in the formatted file.
    The default change bar character is the vertical bar (|).  The
    change bars appear 3 spaces to the left of the lines of text that
    you have marked for change bars.

    For information on the .BEGIN BAR and .END BAR commands, enter
    HELP DSR at the DCL prompt.

    You can replace the default change bar character by supplying a
    substitute character for the /CHANGE_BARS[=character] qualifier.
    You must specify the replacement character as either a character
    enclosed in quotation marks (" ")  or as an octal, decimal, or
    hexadecimal value for the desired character.

    The /CHANGE_BARS qualifier without a value uses the default
    change bar character (|). The /NOCHANGE_BARS qualifier overrides
    any change bar commands in the input file and disables the output
    of change bars.

4    /DEBUG

       /DEBUG[=(option[,...])]
       /NODEBUG (default)

    Positional qualifier.

    Traces certain operations by placing the DSR commands in the
    output file. You can specify the following options:

    o  ALL

       Specifies all five options (CONDITIONALS, CONTENTS, FILES,
       INDEX, and SAVE_RESTORE).

    o  CONDITIONALS

       Causes DSR to ignore all conditional processing commands (.IF,
       .IFNOT, .ELSE, .ENDIF) in the input file. DSR includes both
       true and false conditional information in the output file
       along with formatted text. For further details on the .IF,
       .IFNOT, .ELSE, .ENDIF, and .VARIABLE commands and the /VARIANT
       qualifier, enter HELP DSR at the DCL prompt.

    o  CONTENTS

       Causes DSR to output all .SEND TOC commands along with the
       text being sent to the table of contents.

    o  FILES

       Causes DSR to output all .REQUIRE commands as well as the text
       of the require files.

    o  INDEX

       Causes DSR to output the indexing commands, .INDEX and .ENTRY,
       in addition to the text to which they refer.

    o  SAVE_RESTORE

       Causes DSR to output all .SAVE and .RESTORE commands.

    If you specify only one option, you can omit the parentheses.
    If you specify /DEBUG without specifying any options, ALL is
    assumed.

5    /DEVICE

       /DEVICE=(option[,...])

    Positional qualifier.

    Controls whether DSR generates an output file (.LNI) that is
    suitable for printing on an LN01, an LN01E, or an LN03 laser
    printer.

    If you do not get the output that you expect when you print an
    .LNI file on an LN01 or an LN01E printer, check with your system
    manager. The OpenVMS DIGITAL Standard Runoff Reference Manual
    contains information for system managers about setting LN01 and
    LN01E laser printers to print .LNI files.

    You can choose options from the following list to indicate
    output device, page orientation, and type of emphasis for flagged
    characters in your .LNI file:

    o  LN01

       Produces an output file suitable for printing on an LN01 laser
       printer; the default paper size is 8 1/2 by 11 inches; the
       default mode is PORTRAIT. The output file name is the same
       as the input file name; the default file type is .LNI. This
       option is incompatible with the LN01E option.

    o  LN01E

       Produces an output file suitable for printing on an LN01E
       laser printer using the standard European paper size (A4).
       The output file name is the same as the input file name. The
       default file type is .LNI; the default mode is PORTRAIT. This
       option is incompatible with the LN01 option.

    o  LN03

       Produces an output file suitable for printing on an LN03 laser
       printer; the default paper size is 8 1/2 by 11 inches. The
       output file name is the same as the input file name. The
       default file type is .LNI; the default mode is PORTRAIT.

    o  LANDSCAPE

       Causes the appropriate fonts for landscape mode to be loaded
       into an LN01 printer; pages are printed with the long
       dimension at the top and use a smaller type size. (The page
       is 11 inches wide and 8 1/2 inches long.) Allowable page
       dimensions are 0 to 73 lines per page and 0 to 132 characters
       per line. This option is incompatible with the PORTRAIT
       option.

    o  PORTRAIT (default)

       Causes the appropriate fonts for portrait mode to be loaded
       into an LN01 printer; pages are printed with the short
       dimension at the top and use a larger type size. (The page
       is 8 1/2 inches wide and 11 inches long.) Allowable page
       dimensions are 0 to 66 lines per page and 0 to 80 characters
       per line. This option is incompatible with the LANDSCAPE
       option.

       PORTRAIT mode is the default when you specify /DEVICE=LN01,
       /DEVICE=LN01E, or /DEVICE=LN03.

    o  ITALIC (default)

       Causes the italic and bold-italic fonts to be loaded into an
       LN01 printer, and makes characters flagged for underlining
       appear in italic type. Italicized characters can also appear
       in boldface type, depending on the type of emphasis you
       specify in your input file.

       The LN03 printer requires no loading of fonts, because default
       fonts are present. Text flagged for emphasis is printed in
       italic type if the current font has the ITALIC attribute;
       otherwise the flagged text is underlined.

    o  UNDERLINE

       Causes the text and bold fonts to be loaded into an LN01
       printer, and underlines characters flagged for underlining.
       The LN01 printer allows only 63 consecutive characters
       (counting a space as a character) to be underlined per line.
       If you want to underline individual words and not the spaces
       between them, you will be able to underline only 63 words per
       line. This option is incompatible with the ITALIC option.

       DSR does not report an error if the user exceeds this limit
       of the hardware. On an LN03 printer, the flagged text is
       underlined if you have specified the UNDERLINE option. The
       printer does not default to italic even if the current font
       has the ITALIC attribute.

6    /DOWN

       /DOWN[=n]
       /NODOWN (default)

    Positional qualifier.

    Controls whether DSR inserts a specified number of blank lines
    at the top of each page. These blank lines precede any header
    information. The number of blank lines you specify (n)  does not
    affect the number of text lines on a page. For example, if you
    specify /DOWN=10 with a .PAGE SIZE of 58 lines, up to 58 lines of
    text will be output after 10 blank lines.

    If you specify the /DOWN qualifier without a value, five blank
    lines are inserted. If you specify /DOWN=0 or omit the qualifier,
    no blank lines are inserted, except those associated with the
    print device or header layout.

7    /FORM_SIZE

       /FORM_SIZE=n

    Specifies the maximum number of lines per page including running
    heads and running feet. Defaults to /FORM_SIZE=66, which is
    standard for 11-inch paper. For laser printers, set the number
    of lines as follows:

    Paper
    Size       Lines Mode

    8.05       69    Landscape
    8.28       71    Landscape (LN01E default)
    8.51       73    Landscape (LN01, LN03 default)
    11.00      66    Portrait (LN01, LN03 default)
    11.66      70    Portrait (LN01E default)
    12.33      74    Portrait
    13.00      78    Portrait
    14.00      84    Portrait

    When used with the /SIMULATE qualifier, the /FORM_SIZE qualifier
    controls the physical size of the page by putting out line feeds
    to match the number specified by the value n. When used with the
    /NOSIMULATE qualifier, the /FORM_SIZE=n qualifier causes DSR to
    suppress the form feed that DSR would normally insert at the line
    number specified by the value n. If the number of lines that DSR
    is going to put on any given page does not match the value n, a
    form-feed character is written into the output file.

    The default value for the value n is derived from the OpenVMS
    Run-Time Library (RTL) routine LIB$LP_LINES. This defaults to
    66 unless the logical SYS$LP_LINES is defined, in which case the
    assigned value is used. To change the default value, specify a
    different value for the /FORM_SIZE=n qualifier.

8    /INTERMEDIATE

       /INTERMEDIATE[=filespec]
       /NOINTERMEDIATE (default)

    Positional qualifier.

    Controls whether DSR generates an intermediate output file that
    can be used as input to the DSR table of contents utility and the
    DSR indexing utility. For more information on producing tables of
    contents and indexes, see the descriptions of the /CONTENTS and
    /INDEX qualifiers.

    If you specify the /INTERMEDIATE qualifier, DSR creates an
    output file that has the same file name as the input file and
    a file type of .BRN. To rename the output file, supply a file
    specification that is different from the default values.

9    /LOG

       /LOG
       /NOLOG (default)

    Controls whether a termination message is displayed at the
    terminal after successful completion of the DSR operation. The
    message states the DSR version number, the number of diagnostic
    messages (if any), the number of output pages, and the output
    file specification.

    If you specify the /INTERMEDIATE qualifier, the message also
    includes the number of index records produced and the number of
    table of contents records produced.

    If there are errors in processing, DSR displays a message on the
    terminal even if the /NOLOG qualifier is specified.

10    /MESSAGES

       /MESSAGES=(option[,...])

    Positional qualifier.

    Specifies the destination of all DSR error messages. To indicate
    a specific destination, use one or both of the following options:

    OUTPUT     Messages are sent to the output .MEM file.
    USER       Messages are displayed on the terminal (SYS$ERROR).

    If you specify both options, separate them with commas and
    enclose the list in parentheses.

    The default, /MESSAGES=(OUTPUT,USER), sends messages to the
    output .MEM file and displays them on the terminal.

11    /OUTPUT

       /OUTPUT[=filespec]
       /NOOUTPUT

    Positional qualifier.

    Specifies that an output file is to be produced and optionally
    names it. If you specify the /OUTPUT qualifier without a file
    specification, or if you omit the qualifier, the directory and
    file name default to that of the DSR file. If you specify the
    /NOOUTPUT qualifier, no output file is produced. The output file
    type depends on the input file type. The default input file type
    is .RNO and the default output file type is .MEM.

    The file type defaults to one of the following:

    Output   Input
    File     file

    .BLB     .RNB
    .CCO     .RNC
    .DOC     .RND
    .ERR     .RNE
    .HLP     .RNH
    .LNI     .RNO with /DEVICE set to LN01, LN01E, or LN03
    .MAN     .RNM
    .MEC     .RNT
    .MEM     .RNO with no /DEVICE qualifier specification
    .MEX     .RNX
    .OPR     .RNP
    .PLM     .RNL
    .STD     .RNS

    For a complete list of input file types and the associated output
    file types, see the OpenVMS DIGITAL Standard Runoff Reference
    Manual.

    To change the name of the output file, supply a file
    specification for the value filespec.

    The /OUTPUT=SYS$OUTPUT qualifier causes output to be sent to
    the terminal rather than to a disk file. You can use the value
    SYS$OUTPUT when you are logged in to a hardcopy terminal device
    that uses a daisy wheel.

    The /NOOUTPUT qualifier suppresses the creation of an output
    file. Using the /NOOUTPUT qualifier with the /INTERMEDIATE
    qualifier causes DSR to produce only an intermediate .BRN file
    and not a formatted output file.

    You can also use the /NOOUTPUT qualifier to check an input file
    for errors without using system resources to generate a formatted
    output file.

12    /PAGES

       /PAGES=string

    Positional qualifier.

    Specifies that only the pages within the specified range be
    generated as output. By default, DSR generates output for all
    pages. Specify the range as follows:

    start-page-number:end-page-number,...

    You can specify up to five ranges (for example, /PAGES="2-9:2-12,
    4-1:4-10, 5-9:5-9, A-1:A-3, and Index-1:Index-5"). You can omit
    the colon (:)  and the end page number on the last range. You can
    omit the quotation marks (" ")  if you specify only one range.
    Page numbers must be specified in their default form, not the
    form specified in a .DISPLAY command. You can specify just the
    appendix letter or name to produce an entire appendix. You can
    specify just the word INDEX to produce an entire index.

    If you specify only a starting page number, output begins at the
    specified page and continues to the end of the file. To output a
    single page, the start range and end range must be the same (for
    example, /PAGES=5:5).

    For an entire appendix, only a letter is required (for example,
    /PAGES=A). For an entire index, only the word INDEX is required
    (/PAGES=INDEX). You can refer to specific appendix or index pages
    with a numeric suffix such as INDEX-10.

    Note that the /PAGES qualifier does not recognize any display
    modes. You must specify the default form of page numbers (5-15)
    rather than any special form you may have specified with the
    .DISPLAY NUMBER command (for example, V-15). For details on the
    .DISPLAY NUMBER command, enter HELP DSR at the DCL prompt.

13    /PAUSE

       /PAUSE
       /NOPAUSE (default)

    Controls whether DSR pauses after printing each page of output.

    You can use the /PAUSE qualifier to insert single sheets of paper
    or reproduction masters into hardcopy output devices. When output
    is halted, the terminal bell rings to remind you to insert a new
    form. Press the space bar to resume processing.

    Do not use this qualifier in a batch job.

14    /REVERSE_EMPHASIS

    Positional qualifier.

    Directs DSR to change the order in which flagged text is
    underlined on an output device. If you use this qualifier, the
    printer first prints the characters to be underlined, then issues
    a carriage return without a line feed, and finally prints the
    underscores to underline the flagged text. If you view your file
    on the terminal, the flagged text is overwritten by the underline
    character.

15    /RIGHT

       /RIGHT[=n]
       /NORIGHT (default except for LN01)

    Positional qualifier.

    Causes the text on each page (including header information) to
    be shifted to the right the number of columns specified by n.
    This qualifier does not affect the page width. If you specify
    the /RIGHT qualifier without specifying a number, text is shifted
    five spaces to the right. If you specify a value of zero or omit
    the qualifier, no shift occurs.

    The defaults (if the /RIGHT qualifier is not specified) for LN01
    files are as follows:

    Mode      LN01     LN01E   LN03

    Landscape 9        13      9
    Portrait  2         2      2

16    /SEPARATE_UNDERLINE

       /SEPARATE_UNDERLINE[="character"]

    Positional qualifier.

    Prints underlines as separate characters on the next line instead
    of overstriking with underscores on the same line. The value
    specifies the character to be used for the underline character
    and defaults to a hyphen (-).  You can specify the underline
    character as a single printable character or as a number preceded
    by a radix indicator (%D, %O, or %X)  to represent the ASCII
    value of a printable or nonprintable character.

    This qualifier is incompatible with the /[NO]UNDERLINE_CHARACTER
    qualifier.

17    /SEQUENCE

       /SEQUENCE
       /NOSEQUENCE (default)

    Positional qualifier.

    Controls whether DSR precedes the lines in the output file with
    the line numbers of the corresponding lines in the DSR file.

    For editors that generate line numbers in the input file, the
    /SEQUENCE qualifier causes similar numbering to appear in the
    output file. The line numbers appear in the left margin at the
    beginning of each line of output.

    If the text editor does not generate sequential numbers in the
    input file, sequential numbers are still generated in the output
    file, but without leading zeros.

18    /SIMULATE

       /SIMULATE
       /NOSIMULATE (default)

    Controls whether DSR uses line feeds or form feeds to advance to
    the top of each page.

    For devices that do not have a form-feed capability, use the
    /SIMULATE qualifier to generate enough blank lines to cause a
    skip to the top of each new page. The /SIMULATE qualifier also
    causes a pause before the first page of output. To continue after
    the pause, press the space bar.

19    /UNDERLINE_CHARACTER

       /UNDERLINE_CHARACTER[="character"]
       /NOUNDERLINE_CHARACTER

    Positional qualifier.

    Specifies the character to be used for the underline character.
    Defaults to an underscore (_).  You can specify the underline
    character as a single printable character (enclosed in
    quotation marks) or as a number preceded by a radix indicator
    (%D, %O, or %X)  to represent the ASCII value of a printable or
    nonprintable character. A specification of /NOUNDERLINE_CHARACTER
    overrides any .ENABLE UNDERLINING command in the DSR file.

    This qualifier is incompatible with the /SEPARATE_UNDERLINE
    qualifier.

20    /VARIANT

       /VARIANT="string[,...]"

    Positional qualifier.

    Controls the processing of the conditional commands (.IF, .IFNOT,
    .ELSE, and .ENDIF) by specifying the names of the segments to be
    processed. For descriptions of the conditional commands, enter
    HELP DSR at the DCL prompt.

    You must name conditional structures introduced by the .IF
    command to process them. You must name conditional structures
    introduced by the .IFNOT command to exclude them. You must not
    name conditional structures introduced by the .ELSE command to
    process them. If you specify only one name in a string, you can
    omit the quotation marks (" ").
Close Help