Message Description
Add [host | network] %s: gateway %s options %x
The specified route is being added to the tables. If
the gateway address used was not the primary address of
the gateway (the first one returned by gethostbyname),
the gateway address is printed numerically as well as
symbolically.
Bitmask cannot be used with change command
The optional /bitmask parameter was specified with the
change command. Do not specify a bit mask with the change
command.
Change [ host | network ] %s: gateway %s oldgateway %s\
oldinterface %s
The specified route is being modified in the tables.
Delete [ host | network ] %s: gateway %s options %x
The specified route is being deleted from the tables. If
the gateway address used was not the primary address of
the gateway (the first one returned by gethostbyname),
the gateway address is printed numerically as well as
symbolically.
%s %s done
When you use the flush command, each routing table entry
deleted is indicated with a message of this form.
Entry exist
An add operation was attempted for an entry that already
exists in the routing tables.
Gateway must be 127.0.0.1 for reject and blackhole routes.
The gateway value is incorrect for creating reject and
blackhole routes.
Invalid bitmask
The bitmask specified is not in the range of 1 to 32,
inclusive.
Netmask cannot be used with bitmask.
The -netmask modifier was specified together with a CIDR
bit mask.
Netmask cannot be used with change command
The optional -netmask modifier was specified with the
change command. Do not specify a network mask with the
change command.
Network is unreachable
An attempt to add a route failed because the gateway
listed was not on a directly connected network. The next
hop gateway must be given.
Not in table
A delete operation was attempted for an entry that was
not present in the tables.
Routing table overflow
An add operation was attempted, but the system was low on
resources and was unable to allocate memory to create the
new entry.