Displays information from the running system for Internet
    interfaces and pseudointerfaces.

    The flags that can appear in the display include:

    o  AMCST-The interface will receive multicast packets.

    o  BRDCAST-Indicates the interface supports broadcast messages.

    o  LOOP-The interface is a loopback mode. Packets transmitted on
       this interface will be looped back in the driver and not be
       transmitted out on the network.

    o  MCAST-The interface supports multicast packets. However, this
       does not mean that a multicast address is configured for the
       interface.

    o  NOARP-The interface is not using address resolution protocol
       (ARP). It will neither transmit nor respond to ARP requests.

    o  PFCPY-All packets transmitted on this interface are copied and
       passed to the packet filter program.

    o  PTP- The interface is point-to-point link. This is a read-only
       flag that is set by the driver.

    o  RUN-Indicates the interface is operational. The driver has
       allocated resources for the interface and is ready to transmit
       and receive packets. This option is not applicable to loopback
       devices, for example, LO0.

    o  SMPX-The interface cannot hear its own transmissions.

    o  UP-Indicates the interface is enabled for use.

    o  VMTU-The interface supports variable maximum transmission unit
       (MTU) sizes.

    Related commands: SHOW CONFIGURATION INTERFACE, SET INTERFACE

    Format

      SHOW INTERFACE  [ interface ] [ /FULL ]