ADDRESS FILTERS

         All individual MAC addresses currently enabled by any of the ports on
         the station.

     COMMUNICATION PORT

         DECnet-Plus device name for the station.

     HARDWARE ADDRESS

         Individual medium access control MAC address that was assigned during
         manufacture of the communications hardware that is associated with the
         station.

     MAC ADDRESS

         Current MAC address if any of the station. For more information about
         the MAC address, refer to the enable command.

     RECEIVE MODE

         Current receive mode for the station.  Some stations may not support
         all modes.

         NORMAL -        The station receives only those frames individual and
                         multicast that meet the normal format, protocol, and
                         access control requirements.

         ALL MULTICAST - The station receives all individual-addressed frames
                         that meet the normal format, protocol, and address
                         requirements, and all multicast-addressed frames
                         regardless of their format, protocol, and address
                         types.

         PROMISCUOUS -   The station receives all frames individual and
                         multicast regardless of format, Ethernet protocol
                         type, SNAP identifier, LLC SAP address, or MAC
                         address.

     STATE

         Operational state of the station.

         OFF -           The station is disabled.

         ON -            The station is enabled and available for use.

         FAILED -        Either an attempt to enable the station failed during
                         the self-test or the station was on and the data link
                         determined that the station would now fail the
                         self-test.

         INITIALIZING -  The station is currently being initialized and tested
                         by the data link.