o area addresses
Support: All
A set of area addresses. If the node is an end node, these are
the area address portions of the NETs of all adjacent routers.
If the node is a level 1 or level 2 router, this set is the union
of the sets of manual area addresses reported in all level 1 LSPs
received by this router.
o egp port
Support: IP
Name of the routing port entity used for sending and receiving
EGP messages. This attribute is set when a routing egp group
entity is enabled.
o icmp port
Support: IP
Name of the routing port entity used for sending and receiving
ICMP messages. This attribute is set when the routing module is
enabled and the protocols characteristic includes the value IP.
o L1 state
Support: L1,L2
State of the level 1 database.
off Routing is disabled.
on Routing is enabled and operating correctly.
waiting Routing has received routing information that it cannot
store and is waiting for the overload to be removed.
o L2 state
Support: L2
State of the level 2 database.
off Routing is disabled.
on Routing is enabled and operating correctly.
waiting Routing has received routing information that it cannot
store and is waiting for the overload to be removed.
o nearest L2 router adjacencies
Support: L1,L2
Names of adjacencies to be used for forwarding to the nearest
level 2 router. If the node is a level 2 router adjacent to other
areas, or if it is a level 1 router in an area with no attached
level 2 routers, this set is empty.
o rip port
Support: IP
Name of the udp port entity used by the routing module for
sending and receiving RIP messages. This attribute is set
when a routing circuit entity is enabled with its rip state
characteristic set to any value other than off.
o state
Support:
All
State of the routing entity.
off The entity is disabled.
on The entity is enabled.
o uid
Entity's unique identifier, which is generated when the entity is
created.