o addresses
Default: Empty set Value: Set of LAN addresses
Set of LAN addresses for this client on the circuit specified by
the circuit characteristic.
For OpenVMS, Phase IV nodes can use an extended DECnet LAN address in
addition to their hardware address, so you must include both of these
addresses in the addresses set. To calculate the extended DECnet
address, express the Phase IV node address as a four-digit hex
integer, then add the prefix AA-00-04-00.
For example, if the Phase IV node address is 4.260:
4.260
o circuit
Default: No circuit Value: Circuit-id
Name of the MOP circuit that corresponds to the Data Link circuit
that is to be used for communicating with this client.
o device types (OpenVMS)
Default: No device types Value: Set of device types
Specifies one or more device types associated with this client.
Use device types and omit addresses if you want to set up a
generic client entity; the entity will be used for any incoming
load or dump requests that specify a matching communications
device type.
To determine the communications device type for a particular
network server, consult the server documentation, or use the
Configuration Monitor Function of MOP.
o diagnostic image
Default: No file Value: Sequence of file specifications
Files to be loaded when the client requests a diagnostic image
during a downline load operation. File identifications are
interpreted according to the file system of the local system.
o dump address
Default: 1 Value: 0 to 232 -1
Memory address at which to begin an upline dump.
o dump file
Default: No file Value: Sequence of file specifications
Files to write to when the client is upline dumped. File
identifications are interpreted according to the file system
of the local system.
o management image
Default: No file Value: Sequence of file specifications
Files to be loaded when the client requests a management image
during a downline load operation. File identifications are
interpreted according to the file system of the local system.
o phase iv client address
Default: 0.0 Value: Phase IV address
Phase IV node address given to the client system when it is
downline loaded. This address is passed in a load parameters
message; whether it is needed depends on the software being
loaded.
o phase iv client name
Default: No name Value: Phase IV name
Phase IV node name given to the client system when it is downline
loaded. This name is passed in a load parameters message; whether
it is needed depends on the software being loaded.
o phase iv host address
Default: 0.0 Value: Phase IV address
Phase IV node address to be passed as the host node address when
a client is downline loaded. This address is passed in a load
parameters message; whether it is needed depends on the software
being loaded.
o phase iv host name
Default: No name Value: Phase IV name
Phase IV node name that is passed as the host name when the
client is downline loaded. This name is passed in a load
parameters message; whether it is needed depends on the software
being loaded.
o script file
Default: No file Value: Sequence of file specifications
Files to be loaded when the client requests a CMIP initialization
script during a downline load operation. File identifications are
interpreted according to the file system of the local system.
o secondary loader
Default: No file Value: Sequence of file specifications
Files to be loaded when the client requests a secondary loader
during a downline load operation. File identifications are
interpreted according to the file system of the local system.
o system image
Default: No file Value: Sequence of file specifications
Files to be loaded when the client requests an operating system
image during a downline load operation. File identifications are
interpreted according to the file system of the local system.
o tertiary loader
Default: No file Value: Sequence of file specifications
Files to be loaded when the client requests a tertiary loader
during a downline load operation. File identifications are
interpreted according to the file system of the local system.
o verification
Default: %x00-00-00-00-00-00 Hex string
Verification string to be sent in a boot message to this client.
The value must have an even number of digits from 2 to 16.