o address filters
All individual MAC addresses currently enabled by any of the
ports on the station.
o communication port
DECnet-Plus device name for the station.
o hardware address
Individual medium access control (MAC) address that was assigned
during manufacture of the communications hardware that is
associated with the station.
o mac address
Current MAC address (if any) of the station. For more information
about the MAC address, see the enable command.
o receive mode
Current receive mode for the station. Some stations may not
support all modes.
normal The station receives only those frames (individual
and multicast) that meet the normal format,
protocol, and access control requirements.
all The station receives all individual-addressed
multicast frames that meet the normal format, protocol, and
address requirements, and all multicast-addressed
frames regardless of their format, protocol, and
address types. This function is only supported on
OpenVMS.
promiscuous The station receives all frames (individual and
multicast) regardless of format, Ethernet protocol
type, SNAP identifier, LLC SAP address, or MAC
address. This function is only supported on
OpenVMS.
o state
Operational state of the station.
failed Either an attempt to enable the station failed
during the self-test or the station was on and the
data link determined that the station would now
fail the self-test.
initializing The station is currently being initialized and
tested by the data link.
off The station is disabled.
on The station is enabled and available for use.
For more information on station states, see the Network
Management manual.
o uid
Entity's unique identifier, which is generated when the station
is created.