o diagnostic packet received
Generated when the DTE receives a diagnostic packet from the
network.
Arguments:
cause Cause code provided by the DCE on reset.
channel Concatenated logical channel group and logical
channel number of the virtual circuit associated
with the event.
diagnostic Diagnostic code provided by the DCE on reset.
o dte down
Generated when the status attribute state changes from on to off,
synchronizing, or unsychronized.
Arguments:
configuration Specifies whether or not there has been a
error configuration error.
lapb link DTE state has changed due to the deletion of the
deleted underlying link service provider entity.
o dte up
Generated when status attribute state changes to on from off,
synchronizing, or unsychronized.
Argument:
config- Specifies the DTE configuration.
uration
dce The DTE has initialized as a packet-mode
DCE.
dte The DTE has initialized as a packet-mode
DTE.
Negotiated The DTE has negotiated to operate as a
dce packet-mode DCE.
Negotiated The DTE has negotiated to operate as a
dte packet-mode DTE.
o illegal packet received
Generated when the DTE receives an illegal packet from the
network.
Arguments:
call time Time at which the call request was made.
ccitt CCITT state.
state
channel Concatenated logical channel group and logical
channel number for the virtual circuit associated
with the event.
direction Direction of the call.
incoming The call was incoming.
outgoing The call was outgoing.
failure Specifies why the packet was flagged as illegal.
reason
header Error in the received block header.
error
invalid Invalid general format identifier.
gfi
invalid The packet is invalid in the current
state state of the protocol.
no No interrupt packet was sent.
interrupt
sent
too long The packet is too long.
too short The packet is too short.
unacknowledgeThere is an outstanding interrupt.
interrupt
unrecognizedThe packet is unrecognizable to the DTE.
header Header contents of the packet that caused the event.
packet Type of illegal packet.
type
remote dte Address of the DTE that is the source of an incoming
call or the destination of an outgoing call.
o network initiated reset
Generated when the DTE receives a Reset packet from the network.
Arguments:
cause Cause code provided by the DCE on reset.
ccitt CCITT state. See possible reasons described under the
state illegal packet received event.
channel Concatenated logical channel group and logical
channel number of the virtual circuit associated
with the event.
diagnostic Diagnostic code provided by the DCE on reset.
direction Direction of the call.
incoming The call was incoming.
outgoing The call was outgoing.
o network initiated restart
Generated when the DTE receives a Restart packet from the
network.
Arguments:
cause Cause code provided by the DCE on reset.
ccitt CCITT state. See possible reasons described under the
state illegal packet received event.
channel Concatenated logical channel group and logical
channel number of the virtual circuit associated
with the event.
diagnostic Diagnostic code provided by the DCE on reset.
o protocol error detected
Generated when a protocol error is detected.
Arguments:
call time Time at which the call request was made.
ccitt CCITT state. See possible reasons described under the
state illegal packet received event.
channel Concatenated logical channel group and logical
channel number for the virtual circuit associated
with the event.
failure Reason for the protocol error.
reason
bad p(r) Invalid receive packet sequence number
received received.
bad p(s) Invalid transmit packet sequence number
received received.
invalid Invalid Logical Channel Number.
lcn
invalid Error in negotiated or requested packet
packet size.
size
invalid Error in negotiated or requested
throughput throughput class.
class
invalid Error in negotiated or requested window
window size.
size
no fast Fast Select is not supported.
select
receiver Data received while in receiver not
not ready ready state.
header Header contents tht caused the event.
remote dte Address of the DTE that is the source of an incoming
call or the destination of an outgoing call.
o reject packet received
Generated when the DTE receives a Reject packet from the network.
Arguments:
call time Time at which the call request was made.
ccitt CCITT state. See possible reasons described under the
state illegal packet received event.
channel Concatenated logical channel group and logical
channel number of the virtual circuit associated
with the event.
direction Direction of the call.
incoming The call was incoming.
outgoing The call was outgoing.
remote dte Address of the DTE that is the source of an incoming
call or the destination of an outgoing call.
o retry failed
Generated when one of the DTE's maximum retry counts has been
reached.
Arguments:
ccitt CCITT state. See possible reasons described under the
state illegal packet received event.
channel Concatenated logical channel group and logical
channel number for the virtual circuit associated
with the event.
remote dte Address of the DTE that is the source of an incoming
call or the destination of an outgoing call.
retry Specifies which retry counter has generated the event
by reaching its maximum value.
clear The maximum clear attempts counter.
reset The maximum reset attempts counter.
restart The maximum restart attempts counter.
o switched virtual circuit failed
Generated when an incoming or outgoing call fails in the setup or
data phase.
Arguments:
call time Time at which the call request was made.
cause Cause code provided by the DCE on reset.
channel Concatenated logical channel group and logical
channel number for the virtual circuit associated
with the event.
diagnostic Diagnostic code provided by the DCE on reset.
direction Direction of the call.
incoming The call was incoming.
outgoing The call was outgoing.
failure Reason why the circuit failed.
reason
call The call was cleared by an invocation of
cleared the interface function.
call Call collision occurred.
collision
call The call timer expired for an outgoing
timeout call attempt.
dte The local DTE was disabled by network
disabled management.
level 2 A failure occurred at the Frame level
failure link or below.
local The X.25 Access module rejected an
reject incoming call attempt.
network A Clear packet with a network cause code
clear was received.
no Insufficient resources to handle call.
resources
no taker Incoming call attempt rejected on
timeout with no response from X.25
Access module.
remote Disconnect initiated by network or
reject remote DTE.
restart A Restart packet was sent by the DCE.
received
security An implementation-specific access
criterion was violated.
remote dte Address of the DTE that is the source of an incoming
call or the destination of an outgoing call.