show sna cp services transmission group The show sna cp services transmission group command displays the values of the attributes for the SNA CP Services Transmission Group entity. The SNA CP Services Transmission Group subentity represents a link between a Peer Server local link station and an adjacent SNA system link station. The connection type can be permanent in which the data link connection remains active when unused, or temporary in which the connection is automatically terminated when unused. Ex, ncl> show sna cp services transmission group tg-1 - _ncl> connection type, node id
1 – Identifier
Name The unique Simplename of the Transmission Group entity that is maintained by the Peer Server.
2 – Status
UID Displays the unique identifier that the Peer Server associates with the Transmission Group. State Displays the operational state of the Transmission Group subentity. Setting the state is a result of execution of the enable/disable commands. The states are Off The Transmission Group is disabled and not available for use. On The Transmission Group is enabled and available for use. Shut The Transmission Group is waiting for the end of active sessions, if any. Protocol Displays the protocol state of the State Transmission Group. These states are Connected The Transmission Group is active. The Transmission Group enters this state from the connecting state after successful XID exchange. Connected The link station is active and the Pending Transmission Group connection type Disconnect is temporary. A transition to zero sessions has started the disconnect timer. Connected - The link station is active and capable PU Active of supporting dependent LUs. The Transmission Group enters this state from the connected state when an ACTPU is successfully processed. Connecting An enabled Transmission Group is being activated locally by a session initiation request from a non-SNA network or remotely when a link station is activated from an adjacent node. Disconnecting The link station is in the process of deactivating. This is for permanent Transmission Groups. The entity state remains on. Disconnect For temporary Transmission Groups, the Reset link station is in the process of de- activating. The entity state is off. Idle The link station is available but inactive. This state is entered when the Transmission Group is enabled. A temporary Transmission Group is activated locally by a session initiation request from a non-SNA network or remotely when a link station is activated from an adjacent node. Reset Resets the link station. This is the creation state. INIT_SELF Displays whether the adjacent link Supported station supports receipt of INIT_SELF. This attribute is relevant only if the Transmission Group is active. BIND Displays, if the Transmission Group is Supported active, whether the Peer Server can send Rq (BIND) RUs to the adjacent link station. Adjacent Node Displays whether the adjacent node BIND Assembly can assemble BIND segments. BIND Pacing Displays, if the Transmission Group is Support active, the type of BIND pacing that the Transmission Group supports. Dependent LU Displays, if the Transmission Group is BIND Pacing active, whether BIND pacing applies to dependent LUs. SSCP Displays whether the adjacent node Mediated requires ACTPU. Sessions Adjacent Displays the node id of the adjacent Station node. This value is supplied during Node ID connection. Adjacent Displays the network id of the Network ID adjacent node. Adjacent Displays the non-network qualified Station name of the CP of the adjacent link CP Name station. Adjacent Displays the network name of the PU Station at the adjacent link station. This PU Name attribute is either blank or it contains the non network qualified PU name of the adjacent link station. Adjacent Displays the local name of the Adjacent Station ALS Link Station at the XID sender. Name
3 – Characteristics
Intranode yes | no Displays whether this Transmission Group is an Intranode Transmission Group. The default is no. If you specify yes, note the characteristics that do to apply. Connection permanent | Permanent means that the Transmission Type temporary Group is activated when it is enabled and remains active until it is disabled. Temporary means that the Transmission Group is activated when a local session is created or a rem- ote link station is activated, and deactivated when there are no sessions. The default is permanent. Dependent yes | no Displays whether Dependent LUs LU Support exist for the Transmission Group. This attribute controls the acceptance of ACTPU, DACTPU, ACTLU, and DACTLU RUs as well as the LFSID address space assignments for the Transmission Group. The default is No. Characteristic does not apply if Intranode is yes. Segmentation session | Displays the kind of segmentation to Support station | be performed by the Peer Server when none communicating with the adjacent link station. The default is session. Characteristic does not apply if Intranode is yes. BIND Pacing (1-32767) Displays the amount that the adaptive Window BIND pacing algorithm increases the Increment receive window size when a larger window size is requested by the BIND sender and when there are adequate resources. This parameter is valid when receive BIND pacing is in effect for the Transmission Group. The default is 1. Characteristic does not apply if Intranode is yes. Disconnect (0-3600) Displays the amount of time (in Timer seconds) a temporary Transmission Group should delay after zero sessions are active before deactivating the link station. The default is 30. XID Retry (1-60) Displays the interval (in seconds) Timer specified for XID send expiration (retry). The default is 3. Characteristic does not apply if Intranode is yes. Data Link Simplename Specifies the local entity name for data link and instance used by the Transmission Group (TG). In the ex- ample, qllc link qllc-0 station ncp, ncp is the name of the local entity used by the TG. Node ID 1- to 8-hexa- Displays the node identifier value decimal char- for the Peer Server. This value is acters (pre- used in XID exchange if the value is ceded by %x) specified. The default is hexadecimal 00000000. Characteristic does not apply if Intranode is yes. Required 1- to 8-hexa- Displays the node identifier value of Adjacent decimal char- the adjacent node. If specified, this Node ID acters (pre- value must match that of the adjacent ceded by %x) node. Characteristic does not apply if Intranode is yes. Required Simplename Displays the network id of the Adjacent adjacent node. If specified, this Network ID value must match the network ID supplied by the adjacent node at connect time or the connection will fail. The value must be a valid SNA network name. Characteristic does not apply if Intranode is yes. Required Simplename Displays the CP Name of the adjacent Adjacent node. If specified, the CP Name must CP Name match the name supplied by the adjacent link station at connect time or the connection will fail. The value must be a valid SNA network name. Characteristic does not apply if Intranode is yes.
4 – Counters
Creation Displays the time that the Transmission Time Group subentity was created. Successful Displays the number of Transmission Activations Group activation procedures that Transmission Group completed successfully. Activation Displays the number of Transmission Failures Group activation procedures that failed due to an XID exchange error. Deactivations Displays the number of times the Transmission Group has been deactivated. Connections Displays the number of times the Lost Transmission Group reported the connections lost event. Octets Sent Displays the number of octets that the Transmission Group sent. Octets Displays the number of octets that the Received Transmission Group received. BTUs Sent Displays the number of BTUs that the Transmission Group sent. BTUs Displays the number of BTUs that the Received Transmission Group received. COLD ACTPUs Displays the number of COLD ACTPUs Received that the Transmission Group received. ERP ACTPUs Displays the number of ERP ACTPUs Received that the Transmission Group received. ACTPUs Displays the number of negative Rejected responses sent to ACTPU requests. DACTPUs Displays the number of DACTPUs Received that the Transmission Group received. Protocol Displays the number of SNA protocol Violations violations that the Transmission Group detected.