HELPLIB.HLB  —  CALL
    Transfers control to a labeled subroutine within a command
    procedure.

    Format

      CALL  label [parameter [...]]

1  –  Parameters

 label

    Specifies a label of 1 to 255 alphanumeric characters that
    appears as the first item on a command line. A label cannot
    contain embedded blanks. When the CALL command is executed,
    control passes to the command following the specified label.

    The label can precede or follow the CALL statement in the
    current command procedure. A label in a command procedure must
    be terminated with a colon (:).  Labels for subroutines must be
    unique.

    Labels declared in inner procedure levels are inaccessible from
    outer levels, as in the following example:

    $CALL B
    $A: SUBROUTINE
    $  B: SUBROUTINE
    $  ENDSUBROUTINE
    $ENDSUBROUTINE

    In this example, the label B in subroutine A is inaccessible from
    the outer procedure level.

 parameter [...]

    Specifies from one to eight optional parameters to pass to the
    command procedure. Use quotation marks (" ")  to specify a null
    parameter. The parameters assign character string values to
    the symbols named P1, P2, and so on in the order of entry, to a
    maximum of eight. The symbols are local to the specified command
    procedure. Separate each parameter with one or more spaces.

    Setting bit 3 of DCL_CTLFLAGS to 1, specifies from one to
    sixteen optional parameters to pass to the command procedure.
    Use quotation marks (" ")  to specify a null parameter. The
    parameters assign character string values to the symbols named
    P1, P2, and so on in the order of entry, to a maximum of sixteen.
    The symbols are local to the specified command procedure.
    Separate each parameter with one or more spaces. If you clear
    the bit 3 of DCL_CTLFLAGS, the default parameters are set (that
    is, (P1, P2, . . . P8)).

    You can specify a parameter with a character string value
    containing alphanumeric or special characters, with the following
    restrictions:

    o  The command interpreter converts alphabetic characters to
       uppercase and uses blanks to delimit each parameter. To pass a
       parameter that contains embedded blanks or lowercase letters,
       enclose the parameter in quotation marks (" ").

    o  If the first parameter begins with a slash (/),  you must
       enclose the parameter in quotation marks.

    o  To pass a parameter that contains quotation marks and spaces,
       enclose the entire string in quotation marks and use two sets
       of quotation marks within the string. For example:

       $ CALL SUB1 "Never say ""quit"""

       When control transfers to SUB1, the parameter P1 is equated to
       the following string:

       Never say "quit"

       If a string contains quotation marks and does not contain
       spaces, the quotation marks are preserved in the string and
       the letters within the quotation marks remain in lowercase.
       For example:

       $ CALL SUB2 abc"def"ghi

       When control transfers to SUB2, the parameter P1 is equated to
       the string:

       ABCdefGHI

    To use a symbol as a parameter, enclose the symbol in single
    quotation marks (` ')  to force symbol substitution. For example:

    $ NAME = "JOHNSON"
    $ CALL INFO 'NAME'

    The single quotation marks cause the value "JOHNSON" to be
    substituted for the symbol `NAME'. Therefore, the parameter
    "JOHNSON" is passed as P1 to the subroutine INFO.

2  –  Qualifier

2.1    /OUTPUT

       /OUTPUT=filespec

    Writes all output to the file or device specified. By default,
    the output is written to the current SYS$OUTPUT device and the
    output file type is .LIS. System responses and error messages
    are written to SYS$COMMAND as well as to the specified file. If
    you specify /OUTPUT, the qualifier must immediately follow the
    CALL command. The asterisk (*) and the percent sign (%) wildcard
    characters are not allowed in the output file specification.

    You can also redefine SYS$OUTPUT to redirect the output from a
    command procedure. If you place the following command as the
    first line in a command procedure, output will be directed to the
    file you specify:

    $ DEFINE SYS$OUTPUT filespec

    When the procedure exits, SYS$OUTPUT is restored to its original
    equivalence string. This produces the same result as using the
    /OUTPUT qualifier when you execute the command procedure.

3  –  Example

  $
  $! CALL.COM
  $
  $! Define subroutine SUB1
  $!
  $ SUB1: SUBROUTINE
     .
     .
     .
  $ CALL SUB2 !Invoke SUB2 from within SUB1
     .
     .
     .
  $ @FILE  !Invoke another procedure command file
     .
     .
     .
  $ EXIT
  $ ENDSUBROUTINE !End of SUB1 definition
  $!
  $! Define subroutine SUB2
  $!
  $ SUB2: SUBROUTINE
     .
     .
     .
  $ EXIT
  $ ENDSUBROUTINE !End of SUB2 definition
  $!
  $! Start of main routine. At this point, both SUB1 and SUB2
  $! have been defined but none of the previous commands have
  $! been executed.
  $!
  $ START:
  $ CALL/OUTPUT=NAMES.LOG SUB1 "THIS IS P1"
     .
     .
     .
  $ CALL SUB2 "THIS IS P1" "THIS IS P2"
     .
     .
     .
  $ EXIT  !Exit this command procedure file

      The command procedure in this example shows how to use the CALL
      command to transfer control to labeled subroutines. The example
      also shows that you can call a subroutine or another command
      file from within a subroutine.

      The CALL command invokes the subroutine SUB1, directing output
      to the file NAMES.LOG and allowing other users write (W) access
      to the file. The subroutine SUB2 is called from within SUB1.
      The procedure executes SUB2 and then uses the @ (execute
      procedure) command to invoke the command procedure FILE.COM.

      When all the commands in SUB1 have executed, the CALL command
      in the main procedure calls SUB2 a second time. The procedure
      continues until SUB2 has executed.
Close Help