LANCP$HELP.HLB  —  Commands
    This section describes and provides examples of the LANCP
    commands. The following table summarizes the LANCP commands:

    Command                     Function

    @ (Execute Procedure)       Executes a command procedure.
    CLEAR DEVICE                Deletes device data from the LAN
                                volatile device database.
    CLEAR DLL or CLEAR MOPDLL   Clears MOP downline load counters for
                                all nodes and devices.
    CLEAR NODE                  Deletes a node from the LAN volatile
                                node database.
    CONNECT NODE                Connects to a LAN device, such as a
                                terminal server, that implements a
                                management interface using the MOP
                                console carrier protocol.
    CONVERT DEVICE_DATABASE     Converts the device database to
                                the format required by the current
                                version of LANCP.
    CONVERT NODE_DATABASE       Converts the node database to the
                                format required by the current
                                version of LANCP.
    DEFINE DEVICE               Enters a device into the LAN
                                permanent device database or modifies
                                an existing entry.
    DEFINE NODE                 Enters a node into the LAN permanent
                                node database or modifies an existing
                                entry.
    EXIT                        Stops execution of LANCP and returns
                                control to the DCL command level.
    HELP                        Provides online help information
                                about the LANCP utility.
    LIST DEVICE                 Displays information in the LAN
                                permanent device database.
    LIST NODE                   Displays information in the LAN
                                permanent node database.
    PURGE DEVICE                Deletes device data from the LAN
                                permanent device database.
    PURGE NODE                  Deletes a node from the LAN permanent
                                node database.
    SET ACP                     Modifies the operation of the LANACP
                                LAN Server process.
    SET DEVICE                  Enters a device into the LAN volatile
                                device database or modifies an
                                existing entry and sets device
                                parameters.
    SET NODE                    Enters a node into the LAN volatile
                                node database or modifies an existing
                                entry.
    SHOW ACP                    Displays currently set LANCP and
                                LANACP options.
    SHOW CONFIGURATION          Displays a list of LAN devices on the
                                system.
    SHOW DEVICE                 Displays information in the LAN
                                volatile device database and displays
                                device data.
    SHOW DLL or SHOW MOPDLL     Displays the current state of MOP
                                downline load services.
    SHOW LOG                    Displays recent downline load
                                activity.
    SHOW NODE                   Displays information in the LAN
                                volatile node database.
    SPAWN                       Creates a subprocess of the current
                                process.
    TRIGGER NODE                Issues a request to reboot to a
                                remote node.
    UPDATE DEVICE               Updates a device, primarily to issue
                                a reset to it.
Close Help