LANCP$HELP.HLB  —  CLEAR

1  –  DEVICE

    Deletes device data from the LAN volatile device database.
    Requires SYSPRV privilege.

    Format

      CLEAR DEVICE  device-name

1.1  –  Parameter

 device-name

    Supplies the LAN controller device name. The device name has
    the form ddcu where dd is the device code, c is the controller
    designation, and u is the unit number.

    LAN devices are specified as the name of the template device,
    which is unit 0. For example, the first PCI Ethernet device is
    specified as EWA0, the second as EWB0., and so on. You can, for
    example, specify a DEMNA controller as EXA, EXA0, or EXA0:.

1.2  –  Qualifier

1.2.1    /ALL

    Deletes data for all LAN devices in the LAN volatile device
    database. If you specify a device name, all matching LAN devices
    are selected. For example: E to select all Ethernet devices, F
    for FDDI, I for Token Ring, EW to select all PCI Ethernet PCI
    devices.

1.2.2    /CHARACTERISTICS

       /CHARACTERISTICS or /PARAMETERS

    Deletes device characteristics settings for the LAN device, such
    as speed, duplex mode, and other device parameters.

1.2.3    /DLL

       /DLL or /MOPDLL

    Deletes MOP downline load settings for the LAN device.

1.2.4    /TRACE

    Deletes driver tracing settings for the LAN device.

    If no qualifier is present to select the type of data to delete,
    the entire device entry is deleted.

1.3  –  Example

  LANCP> CLEAR DEVICE EXA0

      This command deletes device EXA0 from the LAN volatile device
      database.

2  –  DLL

    This command clears MOP downline load counters from the LAN
    volatile device and node databases for all nodes and devices.
    This command requires SYSPRV privilege.

    Format

      CLEAR DLL

2.1  –  Parameters

    None.

2.2  –  Qualifiers

    None.

2.3  –  Example

  LANCP> CLEAR DLL

      This command clears MOP downline load counters from the LAN
      volatile device and node databases for all nodes and devices.

3  –  NODE

    Deletes a node from the LAN volatile node database. Requires
    SYSPRV privilege.

    Format

      CLEAR NODE  node-name

3.1  –  Parameter

 node-name

    Supplies the name of a node in the LAN volatile node database.

3.2  –  Qualifier

3.2.1    /ALL

    Deletes all LAN nodes in the LAN volatile node database. If
    you specify a node name, all matching nodes are selected; for
    example, A/ALL deletes all nodes whose name begins with A.

3.3  –  Example

  LANCP> CLEAR NODE VAXSYS

      This command deletes the node VAXSYS from the LAN volatile node
      database.
Close Help