1 – SMG$ADD_KEY_DEF
The Add Key Definition routine adds a keypad key definition to a
table of key definitions.
Format
SMG$ADD_KEY_DEF key-table-id ,key-name [,if-state]
[,attributes] [,equivalence-string]
[,state-string]
1.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
1.2 – Arguments
key-table-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifies the key table to which you are adding a key
definition. The key-table-id argument is the address of an
unsigned longword that contains the key table identifier.
The key table identifier argument is returned by the SMG$CREATE_
KEY_TABLE routine.
key-name
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Identifies the key whose value you are defining. The key-name
argument is the address of a descriptor pointing to this key
name. The SMG$ADD_KEY_DEF routine changes the string to uppercase
and removes trailing blanks.
if-state
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Qualifies the value returned when key-name is pressed. The if-
state argument is the address of a descriptor pointing to the
state string.
If if-state is specified, this definition of key-name is used
only if the current state matches the specified if-state string.
The if-state argument must be from 1 to 31 characters in length.
If this argument is omitted, if-state defaults to the value
DEFAULT.
attributes
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Longword bit mask specifying additional attributes of this key
definition. The attributes argument is the address of an unsigned
longword that contains this attribute mask. If omitted, the mask
is zero.
Valid attributes are described in the following list:
SMG$M_KEY_NOECHO If set, this bit specifies that
equivalence-string is not to be echoed
when this key is pressed. If clear,
equivalence-string is echoed. If SMG$M_
KEY_TERMINATE is not set, SMG$M_KEY_NOECHO
is ignored.
SMG$M_KEY_TERMINATE If set, this bit specifies that when
this key is pressed (as qualified by if-
state) the input line is complete and
more characters should not be accepted.
If clear, more characters may be accepted.
In other words, setting this bit causes
equivalence-string to be treated as a
terminator.
SMG$M_KEY_LOCK If set, and if state-string is specified,
the state name specified by state-string
remains the current state until explicitly
changed by a subsequent keystroke whose
definition includes a state-string. If
clear, the state name specified by state-
string remains in effect only for the next
defined keystroke.
SMG$M_KEY_PROTECTED If set, this bit specifies that this
key definition cannot be modified or
deleted. If clear, the key definition can
be modified or deleted.
The remaining bits are undefined and must be zero. It is possible
to perform a logical OR operation on these values to set more
than one attribute at a time.
equivalence-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Character string to be substituted for the keystroke in the
returned line. The equivalence-string argument is the address
of a descriptor pointing to this equivalence string.
The equivalence-string argument is displayed unless SMG$M_KEY_
NOECHO is set. If equivalence-string is omitted, no equivalence
string is defined for this key.
state-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Contains a new state name that becomes the current state when
this key is pressed. The state-string argument is the address of
a descriptor pointing to the new state string.
If omitted, no new state is defined. If the current state is
temporary (that is, if SMG$M_KEY_LOCKSTATE was not specified for
the most recently pressed defined key), the current state-string
becomes DEFAULT.
2 – SMG$BEGIN_DISPLAY_UPDATE
The Begin Batching of Display Updates routine saves, or batches,
all output to a virtual display until a matching call to SMG$END_
DISPLAY_UPDATE is encountered.
Format
SMG$BEGIN_DISPLAY_UPDATE display-id
2.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
2.2 – Argument
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display for which output is to be batched.
The display-id argument is the address of an unsigned longword
that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
3 – SMG$BEGIN_PASTEBOARD_UPDATE
The Begin Batching of Pasteboard Updates routine saves, or
batches, all output to a pasteboard until a matching call to
SMG$END_PASTEBOARD_UPDATE is encountered.
Format
SMG$BEGIN_PASTEBOARD_UPDATE pasteboard-id
3.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
3.2 – Argument
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard for which output is to be batched. The
pasteboard-id argument is the address of an unsigned longword
that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
4 – SMG$CANCEL_INPUT
The Cancel Input Request routine immediately cancels any read-
in-progress that was issued by SMG$READ_COMPOSED_LINE, SMG$READ_
KEYSTROKE, SMG$READ_STRING, or SMG$READ_VERIFY.
Format
SMG$CANCEL_INPUT keyboard-id
4.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
4.2 – Argument
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual keyboard for which the input is to be
canceled. The keyboard-id argument is the address of an unsigned
longword that contains the keyboard identifier.
The keyboard identifier is returned by SMG$CREATE_VIRTUAL_
KEYBOARD.
5 – SMG$CHANGE_PBD_CHARACTERISTICS
The Change Pasteboard Characteristics routine lets you change the
characteristics associated with a pasteboard.
Format
SMG$CHANGE_PBD_CHARACTERISTICS pasteboard-id
[,desired-width] [,width]
[,desired-height] [,height]
[,desired-background-color]
[,background-color]
5.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
5.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard whose characteristics are to be changed.
The pasteboard-id argument is the address of an unsigned longword
that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
desired-width
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
New width for the pasteboard. The desired-width argument is the
address of a signed longword that contains the desired width. If
omitted, the width does not change.
width
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Receives the physical width of the pasteboard. The width argument
is the address of a signed longword into which is written the
actual width of the pasteboard.
If the terminal cannot be set exactly to desired-width, width
may be larger than desired-width. If the physical width of the
terminal is smaller than desired-width, width may be smaller than
desired-width.
desired-height
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
New height for the pasteboard. The desired-height argument is the
address of a signed longword that contains the desired height of
the pasteboard. If desired-height is omitted, the height does not
change.
height
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Receives the physical height of the pasteboard. The height
argument is the address of a signed longword into which is
written the actual height of the pasteboard.
If the terminal cannot be set exactly to desired-height, height
may be larger than desired-height. If the physical height of the
terminal is smaller than desired-height, height may be smaller
than desired-height.
desired-background-color
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Symbolic name for the desired background color. The desired-
background-color argument is the address of an unsigned longword
that contains the desired color.
The symbols listed below are defined in $SMGDEF. Valid values for
desired-background-color are as follows:
SMG$C_COLOR_WHITE Light background
SMG$C_COLOR_BLACK Dark background
SMG$C_COLOR_BLUE Blue background
SMG$C_COLOR_CYAN Cyan (green-blue) background
SMG$C_COLOR_GREEN Green background
SMG$C_COLOR_ Magenta background
MAGENTA
SMG$C_COLOR_RED Red background
SMG$C_COLOR_YELLOW Yellow background
SMG$C_COLOR_LIGHT White background
SMG$C_COLOR_DARK Black background
SMG$C_COLOR_USER1 User-defined background 1
SMG$C_COLOR_USER2 User-defined background 2
SMG$C_COLOR_USER3 User-defined background 3
SMG$C_COLOR_USER4 User-defined background 4
SMG$C_COLOR_USER5 User-defined background 5
SMG$C_COLOR_USER6 User-defined background 6
SMG$C_COLOR_USER7 User-defined background 7
SMG$C_COLOR_USER8 User-defined background 8
If you omit desired-background-color, or if the terminal hardware
does not support the background color specified, the background
color is not changed.
background-color
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the background color chosen. The background-color
argument is the address of an unsigned longword into which is
written the background color.
This routine may return any of the values listed in the desired-
background-color argument description or SMG$C_COLOR_UNKNOWN. If
the desired-background-color argument is omitted, the value of
background-color does not change.
6 – SMG$CHANGE_RENDITION
The Change Default Rendition routine changes the video attributes
for all or part of a virtual display.
Format
SMG$CHANGE_RENDITION display-id ,start-row ,start-column
,number-of-rows ,number-of-columns
[,rendition-set] [,rendition-complement]
6.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
6.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display whose default rendition is to be
changed. The display-id argument is the address of an unsigned
longword that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Starting row position to receive the new rendition. The start-row
argument is the address of a signed longword that contains the
starting row number.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Starting column position to receive the new rendition. The start-
column argument is the address of a signed longword that contains
the starting column number.
number-of-rows
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Number of rows to receive the new rendition. The number-of-rows
argument is the address of a signed longword that contains the
number of rows to be affected.
number-of-columns
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Number of columns to receive the new rendition. The number-
of-columns argument is the address of a signed longword that
contains the number of columns to be affected.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can
be specified with the rendition-set argument can be complemented
with the rendition-complement argument. The display-id argument
must be specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
7 – SMG$CHANGE_VIEWPORT
The Change the Viewport Associated with a Virtual Display routine
changes the size of an existing viewport in a virtual display.
The text currently in the viewport is remapped to fit the new
dimensions.
Format
SMG$CHANGE_VIEWPORT display-id [,viewport-row-start]
[,viewport-column-start]
[,viewport-number-rows]
[,viewport-number-columns]
7.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
7.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display containing the viewport to be
changed. The display-id argument is the address of an unsigned
longword containing this identifier.
viewport-row-start
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional row number in the virtual display that will become row
1 in the changed viewport. The viewport-row-start argument is
the address of a signed longword containing the row number. If
omitted, the present viewport-row-start value is used.
viewport-column-start
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional column number in the virtual display that will become
column 1 in the changed viewport. The viewport-column-start
argument is the address of a signed longword containing the
column number. If omitted, the present viewport-column-start
value is used.
viewport-number-rows
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional number of rows in the changed viewport. The viewport-
number-rows argument is the address of a signed longword
containing the number of rows. If omitted, the present viewport-
number-rows value is used.
viewport-number-columns
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional number of columns in the changed viewport. The viewport-
number-columns argument is the address of a signed longword
containing the number of columns. If omitted, the present
viewport-number-columns value is used.
8 – SMG$CHANGE_VIRTUAL_DISPLAY
The Change Virtual Display routine lets you change the
dimensions, border, and video attributes of a virtual display.
Format
SMG$CHANGE_VIRTUAL_DISPLAY display-id [,number-of-rows]
[,number-of-columns]
[,display-attributes]
[,video-attributes]
[,character-set]
8.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
8.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display whose attributes are to be changed.
The display-id argument is the address of an unsigned longword
that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
number-of-rows
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the new number of rows for the virtual display. The
number-of-rows argument is the address of a signed longword that
contains the number of rows in the virtual display.
number-of-columns
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the new number of columns for the virtual display. The
number-of-columns argument is the address of a signed longword
that contains the number of columns in the virtual display.
display-attributes
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the attributes of the virtual display. The display-
attributes argument is the address of a longword bit mask that
contains the display attributes.
Valid values for display-attributes are as follows:
SMG$M_BORDER Specifies a bordered display. If omitted, the
display is not bordered.
SMG$M_BLOCK_ Specifies a block bordered display. If
BORDER omitted, the display is not bordered.
SMG$M_DISPLAY_ Specifies that control characters such as
CONTROLS carriage return and line feed are displayed as
graphic characters, if your terminal supports
them.
SMG$M_TRUNC_ICON Specifies that an icon (generally a diamond
shape) is displayed where truncation of a line
exceeding the width of the virtual display has
occurred.
video-attributes
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default rendition to be applied to all output in
a virtual display, unless overridden by a call to a specific
output routine. The video-attributes argument is the address of
an unsigned longword that contains the video attributes mask.
For example, a call to SMG$PUT_CHARS with an explicit rendition
specified would override the default rendition.
The bits that can be set for this argument are as follows:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that
is, to the opposite of the current default
rendition of the virtual display.
SMG$M_UNDERLINE Displays underlined characters.
SMG$M_INVISIBLE Specifies invisible characters; that is, the
characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
You can specify any combination of attributes in a single call.
All other bits are reserved for use by Compaq and must be 0.
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set specifier. Valid values
are SMG$C_ASCII (the default), and SMG$C_SPEC_GRAPHICS.
9 – SMG$CHECK_FOR_OCCLUSION
The Check for Occlusion routine checks to see whether a virtual
display is covered (occluded) by another virtual display.
Format
SMG$CHECK_FOR_OCCLUSION display-id ,pasteboard-id
,occlusion-state
9.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
9.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to be checked. The display-id
argument is the address of an unsigned longword that contains
the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard to be checked. The pasteboard-id
argument is the address of an unsigned longword that contains
the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
occlusion-state
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Receives the value denoting whether the display is occluded. The
occlusion-state argument is the address of a signed longword into
which the occlusion state is written. Occlusion-state is set to
1 if the display is occluded or set to 0 if the display is not
occluded on the specified pasteboard. If the procedure does not
return SS$_NORMAL, the contents of occlusion-state are undefined.
10 – SMG$CONTROL_MODE
The Control Mode routine controls the mode of the pasteboard.
This includes buffering, minimal updating, whether the screen
is cleared when the pasteboard is deleted, and whether tab
characters are used for screen formatting.
Format
SMG$CONTROL_MODE pasteboard-id [,new-mode] [,old-mode]
[,buffer-size]
10.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
10.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard to be changed. The pasteboard-id
argument is the address of an unsigned longword that contains
the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
new-mode
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the new control settings to be used. The optional
new-mode argument is the address of an unsigned longword that
contains the mode settings. A bit set to 1 forces that mode to be
employed; a bit set to 0 inhibits that mode of operation.
Valid settings are as follows:
SMG$M_BUF_ENABLED Enables buffering.
SMG$M_CLEAR_ Causes the Screen Management Facility to clear
SCREEN the screen when the program exits if you have
not previously deleted the pasteboard.
SMG$M_IGNORE Allows you to delete the pasteboard even if
batching is in effect.
SMG$M_MINUPD Enables minimal update (the default).
SMG$M_NOTABS Causes the Screen Management Facility not to
use tab characters to format the screen.
SMG$M_PROTECT Protect pasteboard operations from AST
interrupts (the default).
SMG$M_RELEASE_PBD Allows you to change the pasteboard size
(using the SMG$CHANGE_PBD_CHARACTERISTICS
routine) and prevents the Screen Management
Facility from modifying anything on the screen
outside of the smaller pasteboard.
All other bits must be 0 and are reserved for future use by
Compaq.
old-mode
OpenVMS usage:mask_longword
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the control settings that were in effect before calling
this procedure. The optional old-mode argument is the address
of an unsigned longword into which the former mode settings are
written. A bit set to 1 indicates that the specified mode was
employed; a bit set to 0 indicates that the mode was inhibited.
buffer-size
OpenVMS usage:word_unsigned
type: word (unsigned)
access: read only
mechanism: by reference
Specifies the size of the buffer in bytes. The optional buffer-
size argument is the address of an unsigned word that contains
the size of the buffer. The buffer-size argument is used when
buffering mode is enabled (SMG$M_BUF_ENABLED). The default and
minimum buffer size is 256 bytes. The maximum value is 65535. The
buffer-size value depends on user authorization file (UAF) values
and is maximized with the SYSGEN parameter MAXBUF.
11 – SMG$COPY_VIRTUAL_DISPLAY
The Copy a Virtual Display routine creates a copy of an
existing virtual display and assigns to it a new virtual display
identifier.
Format
SMG$COPY_VIRTUAL_DISPLAY current-display-id ,new-display-id
11.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
11.2 – Arguments
current-display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier of the virtual display to be replicated.
The current-display-id argument is the address of the unsigned
longword that contains the display identifier.
new-display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the display identifier of the newly created virtual
display. The new-display-id argument is the address of the
unsigned longword that receives the new display identifier.
12 – SMG$CREATE_KEY_TABLE
The Create Key Table routine creates a table for key definitions.
Format
SMG$CREATE_KEY_TABLE key-table-id
12.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
12.2 – Argument
key-table-id
OpenVMS usage:identifier
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the identifier of the newly created key table. The key-
table-id argument is the address of an unsigned longword into
which the key table identifier is written.
13 – SMG$CREATE_MENU
The Fill the Virtual Display with a Menu routine displays
menu choices in the virtual display indicated, starting at the
specified row.
Format
SMG$CREATE_MENU display-id ,choices [,menu-type]
[,flags] [,row] [,rendition-set]
[,rendition-complement]
13.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
13.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier of the virtual display in which the menu is
created. The display-id argument is the address of an unsigned
longword containing this identifier.
choices
OpenVMS usage:static array of char_string
type: character string
access: read only
mechanism: by descriptor
Static array in which each element corresponds to an item to be
displayed in the menu. The choices argument is the address of a
descriptor pointing to this static array of character strings.
Note that blank menu items are ignored.
menu-type
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask specifying the type of menu to be displayed.
The menu-type argument is the address of a longword bit mask that
specifies this menu type. Valid values are as follows:
SMG$K_BLOCK The menu items are displayed in matrix format
(default).
SMG$K_VERTICAL Each menu item is displayed on its own line.
SMG$K_HORIZONTAL The menu items are displayed all on one line.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask specifying the attributes to be used for the
menu. The flags argument is the address of an unsigned longword
that contains the flag. Valid values are as follows:
SMG$M_DOUBLE_ Double-spaced rows of menu items. The default
SPACE is single spaced.
SMG$M_FIXED_ Each menu item is in a fixed-length field. The
FORMAT field is the size of the largest menu item.
The default is compress.
SMG$M_FULL_FIELD The full field is highlighted when you move
within the menu using item keys. The default
is that menu items only are highlighted. If
you specify this flag value, it also implies
SMG$M_FIXED_FORMAT.
SMG$M_WIDE_MENU Wide characters are used in the menu items.
The default is normal sized characters.
SMG$M_WRAP_MENU The up arrow and down arrow keys cause the
menu to wrap when the cursor is on the first
or last rows of the menu.
row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional row number in the specified virtual display at which
the first menu item is displayed. The row argument is the address
of a signed longword that contains this row number. If row is
omitted, the first row of the virtual display's scrolling region
is used.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is the
address of a longword bit mask in which each attribute set causes
the corresponding attribute to be used when writing out the menu
choices. The following attributes can be specified using the
rendition-set argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can
be specified with the rendition-set argument can be complemented
with the rendition-complement argument. The display-id argument
must be specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
14 – SMG$CREATE_PASTEBOARD
The Create a Pasteboard routine creates a pasteboard and returns
its assigned pasteboard identifier.
Format
SMG$CREATE_PASTEBOARD pasteboard-id [,output-device]
[,number-of-pasteboard-rows]
[,number-of-pasteboard-columns] [,flags]
[,type-of-terminal] [,device-name]
14.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
14.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the identifier of the newly created pasteboard. The
pasteboard-id argument is the address of an unsigned longword
into which the new pasteboard identifier is written.
output-device
OpenVMS usage:device_name
type: character string
access: read only
mechanism: by descriptor
Specifies the file specification or logical name to which the
output associated with this pasteboard will be written. The
output-device argument is the address of a descriptor that points
to the name of the output device. If omitted, output is sent to
SYS$OUTPUT.
number-of-pasteboard-rows
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Receives the number of rows on the device specified in the
output-device argument. The number-of-pasteboard-rows argument
is the address of a signed longword into which is written the
number of rows on the specified device, which will be the number
of rows in the pasteboard.
number-of-pasteboard-columns
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Receives the number of columns on the device specified in the
output-device argument. The number-of-pasteboard-columns argument
is the address of a signed longword into which the number of
columns on the specified device is written.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the attributes to be used in the pasteboard. The flags
argument is the address of an unsigned longword that contains
the flag. The default action is to clear the screen when the
pasteboard is created.
Valid values are as follows:
SMG$M_KEEP_ The screen is not initially cleared. The
CONTENTS Screen Management Facility works best when
it can manage the entire screen. Therefore,
using SMG$M_KEEP_CONTENTS is discouraged.
SMG$M_WORKSTATION Calls DECterm to create a DECterm window if
the Screen Management Facility is running on
a workstation that is running DECwindows. If
it is not running on a workstation that is
running DECwindows, this flag is ignored.
type-of-terminal
OpenVMS usage:mask_longword
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the SMG$ internal device type to which the output
associated with this pasteboard will be written. The type-of-
terminal argument is the address of an unsigned longword into
which is written the terminal type.
The returned values are as follows:
SMG$K_UNKNOWN
SMG$K_VTFOREIGN
SMG$K_HARDCOPY
SMG$K_VTTERMTABLE
If a value other than SMG$K_VTTERMTABLE is returned, you must use
SMG$SNAPSHOT to output the contents of the pasteboard.
device-name
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
Receives the device name of the device on which the output
associated with this pasteboard is written. The device-name
argument is the address of a descriptor into which is written
the device name.
If you specify the SMG$M_WORKSTATION value to the flags argument,
this argument returns the DECwindows terminal device name created
by the Screen Management Facility for this pasteboard. (You can
then specify the device name in a call to SMG$CREATE_VIRTUAL_
KEYBOARD to allow reading of input from the DECterm window.)
Otherwise, the string specified by OUT_DEVICE is returned.
15 – SMG$CREATE_SUBPROCESS
The Create and Initialize a Subprocess routine creates a DCL
subprocess and associates it with a virtual display.
Format
SMG$CREATE_SUBPROCESS display-id [,AST-routine]
[,AST-argument] [,flags]
15.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
15.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display with which the newly created
subprocess is associated. The display-id argument is the address
of an unsigned longword containing this identifier.
AST-routine
OpenVMS usage:ast_procedure
type: procedure value
access: call without stack unwinding
mechanism: by value
Optional AST routine to be called when the currently executing
command completes. The AST-routine argument is the routine's
procedure value.
The AST routine is called with five parameters. The first
parameter is a pointer to a data structure that contains the
display-id, AST-argument, and the command-status values. The
remaining four parameters for the AST routine are R0, R1, PC, and
PSL. The following figure illustrates the AST-routine parameters
and the data structure pointed to by the first parameter.
Parameters to AST Routine data structure
+--------------------------------+ +------------------+
| address of data structure |------>| display-id |
+--------------------------------+ +------------------+
| R0 | | AST-argument |
+--------------------------------+ +------------------+
| R1 | | command-status |
+--------------------------------+ +------------------+
| PC |
+--------------------------------+
| PSL |
+--------------------------------+
If the AST-routine argument is specified, the routine
SMG$EXECUTE_COMMAND buffers any commands passed to it and
executes them in order, calling the specified AST routine when
each command completes. If the AST-routine argument is not
specified, SMG$EXECUTE_COMMAND waits until the specified command
completes before returning control to the user.
AST-argument
OpenVMS usage:user_arg
type: longword (unsigned)
access: read only
mechanism: by value
Optional argument you supply to the AST routine. The AST-argument
parameter is an unsigned longword that contains the value to be
passed to the AST routine.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional argument you supply to SMG$CREATE_SUBPROCESS.
SMG$CREATE_SUBPROCESS calls LIB$SPAWN to create the subprocess.
The flags argument lets you control some of the flags used in
that call. Flags available to SMG$CREATE_SUBPROCESS correspond to
flags in LIB$SPAWN as follows:
SMG$CREATE_ LIB$SPAWN
SUBPROCESS Flag Flag Function
SMG$M_TRUSTED TRUSTED If this bit is set, it indicates
a SPAWN command on behalf of the
application. If this bit is not
set, it indicates that the SPAWN
command originates from the user.
SPAWN commands originating from
users are disallowed in captive
accounts (DCL).
SMG$M_AUTHPRIV AUTHPRIV If this bit is set, the subprocess
inherits the caller's authorized
privileges. If this bit is clear,
the spawned processes' authorized
mask is set equal to the caller's
current (active) privilege mask.
SMG$M_SUBSYSTEM SUBSYSTEM If this bit is set, a spawned
process inherits protected
subsystem IDs for the duration
of LOGINOUT.EXE (used to map the
command line interpreter). The IDs
will be removed in the process of
transferring control to the command
language interpreter (CLI) (as a
user mode $RUNDWN is performed).
If this bit is clear, LOGINOUT does
not execute under the subsystem
IDs.
The default is that none of these bits is set. See online Help or
the OpenVMS RTL Library (LIB$) Manual for a complete description
of LIB$SPAWN, these flags, and the security consideration
surrounding their use.
16 – SMG$CREATE_VIEWPORT
The Create a Virtual Viewport routine creates a viewport and
associates it with a virtual display. The location and size of
the viewport are specified by the caller.
Format
SMG$CREATE_VIEWPORT display-id ,viewport-row-start
,viewport-column-start
,viewport-number-rows
,viewport-number-columns
16.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
16.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier of the virtual display associated with the
newly created viewport. The display-id argument is the address of
an unsigned longword containing this identifier.
viewport-row-start
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Row number in the virtual display that will become row 1 in the
viewport. The viewport-row-start argument is the address of a
signed longword containing the row number.
viewport-column-start
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Column number in the virtual display that will become column 1 in
the viewport. The viewport-column-start argument is the address
of a signed longword containing the column number.
viewport-number-rows
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Number of rows in the viewport. The viewport-number-rows argument
is the address of a signed longword containing the number of rows
in the newly created viewport.
viewport-number-columns
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Number of columns in the viewport. The viewport-number-columns
argument is the address of a signed longword containing the
number of columns in the newly created viewport.
17 – SMG$CREATE_VIRTUAL_DISPLAY
The Create Virtual Display routine creates a virtual display and
returns its assigned display identifier.
Format
SMG$CREATE_VIRTUAL_DISPLAY number-of-rows ,number-of-columns
,display-id [,display-attributes]
[,video-attributes]
[,character-set]
17.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
17.2 – Arguments
number-of-rows
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of rows in the newly created virtual
display. The number-of-rows argument is the address of a signed
longword that contains the desired number of rows.
number-of-columns
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of columns in the newly created virtual
display. The number-of-columns argument is the address of a
signed longword that contains the desired number of columns.
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the display-id of the newly created virtual display. The
display-id argument is the address of an unsigned longword into
which is written the display identifier.
display-attributes
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Receives the current default display attributes. The optional
display-attributes argument is the address of an unsigned
longword into which the current display attributes are written.
Valid values for display-attributes are as follows:
SMG$M_BORDER Specifies a bordered display. If omitted, the
display is not bordered.
SMG$M_BLOCK_ Specifies a block-bordered display. If
BORDER omitted, the display is not bordered.
SMG$M_DISPLAY_ Specifies that control characters such as
CONTROLS carriage return and line feed are displayed as
graphic characters, if your terminal supports
them.
SMG$M_PROTECT_ Instructs the Screen Management Facility
DISPLAY to return an error (SMG$_DSPIN_USE) if an
SMG$ call is made from an AST routine that
interrupted an SMG$ call on the same display.
SMG$M_TRUNC_ICON Specifies that an icon (generally a diamond
shape) is displayed where truncation of a line
exceeding the width of the virtual display has
occurred.
video-attributes
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default rendition to be applied to all output in
this virtual display unless overridden by a call to a specific
output routine (for example, SMG$CHANGE_RENDITION). The video-
attributes argument is the address of an unsigned longword that
contains the video attributes mask.
Valid values for this argument are as follows:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video, that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_UNDERLINE Displays underlined characters.
SMG$M_INVISIBLE Specifies invisible characters; that is, the
characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set specifier. Valid values
are SMG$C_ASCII (the default), and SMG$C_SPEC_GRAPHICS.
18 – SMG$CREATE_VIRTUAL_KEYBOARD
The Create a Virtual Keyboard routine creates a virtual keyboard
and returns its assigned keyboard identifier.
Format
SMG$CREATE_VIRTUAL_KEYBOARD keyboard-id [,input-device]
[,default-filespec]
[,resultant-filespec]
[,recall-size]
18.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
18.2 – Arguments
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the keyboard identifier of the newly created virtual
keyboard. The keyboard-id argument is the address of an unsigned
longword into which is written the keyboard identifier.
input-device
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String containing the file specification or logical name of the
file or terminal to be used for this virtual keyboard. The input-
device argument is the address of a descriptor pointing to the
file specification. If omitted, this defaults to SYS$INPUT.
default-filespec
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String containing the default file specification. The default-
filespec argument is the address of a descriptor pointing to the
default file specification. If omitted, the null string is used.
The default-filespec argument might be used to specify a default
device and directory, leaving the input-device argument to supply
the file name and type.
resultant-filespec
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
String into which the procedure writes the fully expanded file
specification of the file used. The resultant-filespec argument
is the address of a descriptor pointing to the string into which
is written the file specification that was used.
recall-size
OpenVMS usage:byte_unsigned
type: byte (unsigned)
access: read only
mechanism: by reference
Number of input lines to be saved for later recall. The optional
recall-size argument is the address of an unsigned byte
containing the specified number of lines. A value of 0 turns
off input line recall. By default, 20 lines are saved for later
recall.
19 – SMG$CURSOR_COLUMN
The Return Cursor Column Position routine returns the virtual
cursor's current column position in a specified virtual display.
Format
SMG$CURSOR_COLUMN display-id
19.1 – Returns
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: write only
mechanism: by value
SMG$CURSOR_COLUMN returns the current virtual cursor column
position.
19.2 – Argument
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
The display for which the column position is returned. The
display-id argument is the address of an unsigned longword that
contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
20 – SMG$CURSOR_ROW
The Return Cursor Row Position routine returns the virtual
cursor's current row position in a specified virtual display.
Format
SMG$CURSOR_ROW display-id
20.1 – Returns
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: write only
mechanism: by value
SMG$CURSOR_ROW returns the current row position.
20.2 – Argument
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
The display for which the row position is returned. The display-
id argument is the address of an unsigned longword that contains
the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
21 – SMG$DEFINE_KEY
The Perform a DEFINE/KEY Command routine performs the DEFINE/KEY
command you provide.
Format
SMG$DEFINE_KEY key-table-id ,command-string
21.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
21.2 – Arguments
key-table-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifies the key definition table for which the DEFINE/KEY
command is to be performed. The key-table-id argument is the
address of an unsigned longword that contains the key table
identifier.
The key table identifier is returned by SMG$CREATE_KEY_TABLE.
command-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String containing the DEFINE/KEY command to be performed. The
command-string argument is the address of a descriptor pointing
to the command to be performed.
The valid qualifiers for the DEFINE/KEY command are as follows:
o /TERMINATE
o /NOECHO
o /LOCK
o /IF_STATE
o /SET_STATE
The following two restrictions apply to the DEFINE/KEY
qualifiers:
o If you use the /LOCK qualifier, you must also use the /SET_
STATE qualifier.
o If you use both the /SET_STATE and /TERMINATE qualifiers, you
may not use /LOCK.
22 – SMG$DELETE_CHARS
The Delete Characters routine deletes characters in a virtual
display.
Format
SMG$DELETE_CHARS display-id ,number-of-characters ,start-row
,start-column
22.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
22.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifies the virtual display from which characters are to be
deleted. The display-id argument is the address of an unsigned
longword that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
number-of-characters
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of characters to be deleted. The number-
of-characters argument is the address of a signed longword that
contains the number of characters to be deleted.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row position at which to start the deletion. The
start-row argument is the address of a signed longword that
contains the row number at which to start the deletion.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column position at which to start the deletion. The
start-column argument is the address of a signed longword that
contains the column position at which to start the deletion.
23 – SMG$DELETE_KEY_DEF
The Delete Key Definition routine deletes a key definition from
the specified table of key definitions.
Format
SMG$DELETE_KEY_DEF key-table-id ,key-name [,if-state]
23.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
23.2 – Arguments
key-table-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifies the key table from which the key definition is
deleted. The key-table-id argument is the address of an unsigned
longword that contains the key table identifier.
key-name
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String containing the name of the key whose definition is to be
deleted. The key-name argument is the address of a descriptor
pointing to the key name. The key name is stripped of trailing
blanks and converted to uppercase before use.
if-state
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String containing a state name that further qualifies key-name.
The if-state argument is the address of a descriptor pointing to
the state name. If omitted, the null state is used. Thus if a key
has several definitions depending on various values of if-state,
this routine lets you delete only one of those definitions.
24 – SMG$DELETE_LINE
The Delete Line routine deletes lines from a virtual display.
Format
SMG$DELETE_LINE display-id ,start-row [,number-of-rows]
24.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
24.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifies the virtual display from which lines are to be
deleted. The display-id argument is the address of an unsigned
longword that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the first line to be deleted from the virtual display.
The start-row argument is the address of a signed longword that
contains the number of the first line to be deleted.
number-of-rows
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of lines to be deleted. The number-of-rows
argument is the address of a signed longword that contains the
number of lines to be deleted. If omitted, one line is deleted.
25 – SMG$DELETE_MENU
The End Access to a Menu in the Virtual Display routine ends
access to the menu choices in the specified virtual display.
Format
SMG$DELETE_MENU display-id [,flags]
25.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
25.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display in which the menu choices are
displayed. The display-id argument is the address of an unsigned
longword containing this identifier.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask specifying possible actions to take when
deleting the menu. The flags argument is the address of an
unsigned longword that contains the flag. At this time, the only
valid value is SMG$M_ERASE_MENU. If this option is specified, all
rows containing menu items are erased.
26 – SMG$DELETE_PASTEBOARD
The Delete Pasteboard routine deletes a pasteboard.
Format
SMG$DELETE_PASTEBOARD pasteboard-id [,flags]
26.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
26.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard to be deleted. The pasteboard-id
argument is the address of an unsigned longword that contains
the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask specifying whether the screen is cleared after
the specified pasteboard is deleted. The flags argument is the
address of an unsigned longword that contains the flag. Valid
values are as follows:
0 Does not clear the screen.
SMG$M_ERASE_PBD Clears the screen (default).
SMG$M_IGNORE_ Deletes the pasteboard even if batching is in
BATCHED effect.
27 – SMG$DELETE_SUBPROCESS
The Terminate a Subprocess routine deletes a subprocess that was
created with the SMG$CREATE_SUBPROCESS routine.
Format
SMG$DELETE_SUBPROCESS display-id
27.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
27.2 – Argument
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display associated with the subprocess
being deleted. The display-id argument is the address of an
unsigned longword that contains this virtual display identifier.
28 – SMG$DELETE_VIEWPORT
The Delete a Viewport routine deletes the specified viewport from
any pasteboards to which it is pasted.
Format
SMG$DELETE_VIEWPORT display-id
28.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
28.2 – Argument
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display associated with the viewport to
be deleted. The display-id argument is the address of an unsigned
longword containing the display identifier.
29 – SMG$DELETE_VIRTUAL_DISPLAY
The Delete Virtual Display routine deletes a virtual display.
Format
SMG$DELETE_VIRTUAL_DISPLAY display-id
29.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
29.2 – Argument
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to be deleted. The display-id
argument is the address of an unsigned longword that contains
the display identifier.
The display identifier display-id is returned by SMG$CREATE_
VIRTUAL_DISPLAY.
30 – SMG$DELETE_VIRTUAL_KEYBOARD
The Delete Virtual Keyboard routine deletes a virtual keyboard.
Format
SMG$DELETE_VIRTUAL_KEYBOARD keyboard-id
30.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
30.2 – Argument
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual keyboard to be deleted. The keyboard-id
argument is the address of an unsigned longword that contains the
keyboard identifier.
The keyboard identifier is returned by SMG$CREATE_VIRTUAL_
KEYBOARD.
31 – SMG$DEL_TERM_TABLE
The Delete Terminal Table routine terminates access to a private
TERMTABLE.EXE and frees the associated virtual address space.
Format
SMG$DEL_TERM_TABLE
31.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
31.2 – Arguments
None.
32 – SMG$DISABLE_BROADCAST_TRAPPING
The Disable Broadcast Trapping routine disables trapping of
broadcast messages for the specified terminal.
Format
SMG$DISABLE_BROADCAST_TRAPPING pasteboard-id
32.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
32.2 – Argument
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard for the terminal to be affected. The
pasteboard-id argument is the address of an unsigned longword
that contains the pasteboard identifier.
33 – SMG$DISABLE_UNSOLICITED_INPUT
The Disable Unsolicited Input routine disables the trapping of
unsolicited input.
Format
SMG$DISABLE_UNSOLICITED_INPUT pasteboard-id
33.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
33.2 – Argument
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the keyboard (associated with the specified pasteboard)
for which unsolicited input is being disabled. The pasteboard-id
argument is the address of an unsigned longword that contains the
pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
34 – SMG$DRAW_CHAR
The Draw a Character in a Virtual Display routine draws a
character at the specified position in a virtual display.
Format
SMG$DRAW_CHAR display-id ,flags [,row] [,column]
[,rendition-set] [,rendition-complement]
34.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
34.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display. The display-id argument is the
address of an unsigned longword containing this identifier.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask indicating the character to be drawn. The flags
argument is the address of an unsigned longword that contains the
flag. The flags argument accepts the following character values:
o SMG$M_UP
o SMG$M_DOWN
o SMG$M_LEFT
o SMG$M_RIGHT
Note that you may perform a logical OR operation to draw T
characters, corner characters, cross characters, and so forth.
A value of 0 draws a diamond character.
row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional row number specifying the row position at which the
specified character is drawn. The row argument is the address of
a signed longword containing the row number. If row is omitted,
the character is drawn at the row position of the current virtual
cursor.
column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional column number specifying the column position at which
the specified character is drawn. The column argument is the
address of a signed longword containing the column number. If
column is omitted, the character is drawn at the column position
of the current virtual cursor.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can
be specified with the rendition-set argument can be complemented
with the rendition-complement argument. The display-id argument
must be specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
35 – SMG$DRAW_LINE
The Draw a Line routine draws a horizontal or vertical line.
Format
SMG$DRAW_LINE display-id ,start-row ,start-column
,end-row ,end-column [,rendition-set]
[,rendition-complement]
35.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
35.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display on which the line is to be drawn.
The display-id argument is the address of an unsigned longword
that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row at which to begin drawing the line. The start-
row argument is the address of a signed longword that contains
the row number at which to begin drawing the line.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column at which to begin drawing the line. The
start-column argument is the address of a signed longword that
contains the column number at which to begin drawing the line.
end-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row at which the drawn line ends. The end-row
argument is the address of a signed longword that contains the
row number at which the drawn line ends.
end-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column at which the drawn line ends. The end-column
argument is the address of a signed longword that contains the
column number at which the drawn line ends.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can
be specified with the rendition-set argument can be complemented
with the rendition-complement argument. The display-id argument
must be specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
36 – SMG$DRAW_RECTANGLE
The Draw a Rectangle routine draws a rectangle.
Format
SMG$DRAW_RECTANGLE display-id ,start-row ,start-column
,end-row ,end-column [,rendition-set]
[,rendition-complement]
36.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
36.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display on which the rectangle is to be
drawn. The display-id argument is the address of an unsigned
longword that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row number of the top left corner of the rectangle.
The start-row argument is the address of a signed longword that
contains the row number of the top left corner of the rectangle.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column number of the top left corner of the
rectangle. The start-column argument is the address of a signed
longword that contains the column number of the top left corner
of the rectangle.
end-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row number of the bottom right corner of the
rectangle. The end-row argument is the address of a signed
longword that contains the row number of the bottom right corner
of the rectangle.
end-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column number of the bottom right corner of the
rectangle. The end-column argument is the address of a signed
longword that contains the column number of the bottom right
corner of the rectangle.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can
be specified with the rendition-set argument can be complemented
with the rendition-complement argument. The display-id argument
must be specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
37 – SMG$ENABLE_UNSOLICITED_INPUT
The Enable Unsolicited Input routine detects unsolicited input
and calls an AST routine in response.
Format
SMG$ENABLE_UNSOLICITED_INPUT pasteboard-id ,AST-routine
[,AST-argument]
37.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
37.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard for which unsolicited input is being
enabled. The pasteboard-id argument is the address of an unsigned
longword that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_VIRTUAL_
PASTEBOARD.
AST-routine
OpenVMS usage:ast_procedure
type: procedure value
access: read only
mechanism: by value
AST routine to be called upon receipt of unsolicited input at
the terminal. The AST-routine argument contains the routine's
procedure value. SMG$ENABLE_UNSOLICITED_INPUT detects the
presence of unsolicited input and calls the AST routine with
six arguments: the pasteboard-id, the AST-argument, R0, R1, PC,
and PSL (on VAX systems) or PS (on Alpha systems).
AST-argument
OpenVMS usage:user_arg
type: longword (unsigned)
access: read only
mechanism: by value
A value to be passed to the AST routine. The AST-argument
argument contains the value to be passed to the AST routine.
38 – SMG$END_DISPLAY_UPDATE
The End Display Update routine ends update batching for a virtual
display.
Format
SMG$END_DISPLAY_UPDATE display-id
38.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
38.2 – Argument
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to be affected. The display-id
argument is the address of an unsigned longword that contains the
display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
39 – SMG$END_PASTEBOARD_UPDATE
The End Pasteboard Update routine ends update batching for a
pasteboard.
Format
SMG$END_PASTEBOARD_UPDATE pasteboard-id
39.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
39.2 – Argument
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard on which the batch count is to be
decremented. The pasteboard-id argument is the address of an
unsigned longword that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
If the batch count reaches 0, all buffered output for the
specified pasteboard is written out.
40 – SMG$ERASE_CHARS
The Erase Characters routine erases characters in a virtual
display by replacing them with blanks.
Format
SMG$ERASE_CHARS display-id ,number-of-characters ,start-row
,start-column
40.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
40.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display from which characters will be
erased. The display-id argument is the address of an unsigned
longword that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
number-of-characters
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of characters to be replaced with blanks.
The number-of-characters argument is the address of a signed
longword that contains the number of characters to be replaced
with blanks.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row on which the erase operation begins. The start-
row argument is the address of a signed longword that contains
the number of the row at which the erasure is to begin.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column on which the erase operation begins. The
start-column argument is the address of a signed longword that
contains the number of the column at which the erasure is to
begin.
41 – SMG$ERASE_COLUMN
The Erase Column from Display routine erases the specified
portion of the virtual display from the given position to the
end of the column.
Format
SMG$ERASE_COLUMN display-id [,start-row] [,column-number]
[,end-row]
41.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
41.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display to be affected. The display-id
argument is the address of an unsigned longword containing this
virtual display identifier.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional line number at which the erase operation begins. The
start-row argument is the address of a signed longword that
contains the specified line number. If this argument is omitted,
the column-number argument is ignored and the erase operation
begins at the current location of the virtual cursor for that
virtual display.
column-number
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional column number at which the erase operation begins.
The column-number argument is the address of a signed longword
that contains the specified column number. If this argument
is omitted, the start-row argument is ignored and the erase
operation begins at the current location of the virtual cursor
for that virtual display.
end-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional row number at which the erase operation ends. The end-
row argument is the address of a signed longword that contains
the specified row number.
42 – SMG$ERASE_DISPLAY
The Erase Virtual Display routine erases all or part of a virtual
display by replacing text characters with blanks.
Format
SMG$ERASE_DISPLAY display-id [,start-row] [,start-column]
[,end-row] [,end-column]
42.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
42.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to be erased. The display-id
argument is the address of an unsigned longword that contains
the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row at which the erase operation begins. The start-
row argument is the address of a signed longword that contains
the number of the row at which the erasure begins.
If the start-row argument is not specified, start-column is also
ignored and the entire virtual display is erased. If you do not
specify start-row and start-column, then end-row and end-column
are ignored and the entire virtual display is erased.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column at which the erase operation begins. The
start-column argument is the address of a signed longword that
contains the number of the column at which the erasure begins.
If the start-column argument is not specified, start-row is also
ignored and the entire virtual display is erased. If you do not
specify start-row and start-column, then end-row and end-column
are ignored and the entire virtual display is erased.
end-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row at which the erase operation ends; that is, the
last row to be erased. The end-row argument is the address of a
signed longword that contains the number of the last row to be
erased.
If the end-row argument is not specified, end-column is also
ignored and all remaining rows in the display are erased.
end-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column at which the erase operation ends; that
is, the last column to be erased. The end-column argument is the
address of a signed longword that contains the number of the last
column to be erased.
If the end-column argument is not specified, end-row is also
ignored and all remaining columns in the display are erased.
43 – SMG$ERASE_LINE
The Erase Line routine erases all or part of a line in a virtual
display.
Format
SMG$ERASE_LINE display-id [,start-row] [,start-column]
43.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
43.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to be affected. The display-id
argument is the address of an unsigned longword that contains the
display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the line at which the erase operation starts. The
start-row argument is the address of a signed longword that
contains the number of the row at which the erasure starts. If
omitted, start-column is also ignored and the current cursor
position is used.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column at which the erase operation starts. The
start-column argument is the address of a signed longword that
contains the number of the column at which the erasure starts.
If omitted, start-row is also ignored and the current cursor
position is used.
44 – SMG$ERASE_PASTEBOARD
The Erase Pasteboard routine erases the contents of a pasteboard.
Format
SMG$ERASE_PASTEBOARD pasteboard-id
44.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
44.2 – Argument
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard to be erased. The pasteboard-id
argument is the address of an unsigned longword that contains
the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
45 – SMG$EXECUTE_COMMAND
The Execute Command in a Subprocess routine executes the
specified command in the subprocess created with the SMG$CREATE_
SUBPROCESS routine.
Format
SMG$EXECUTE_COMMAND display-id ,command-desc [,flags]
[,ret-status]
45.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
45.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier of the virtual display with which the
subprocess is associated. The display-id argument is the address
of an unsigned longword containing this identifier.
command-desc
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Command string. The command-desc argument is the address of a
descriptor pointing to the command string.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies optional behavior. The flags
argument is the address of an unsigned longword that contains the
flag. The valid values for flags are as follows:
SMG$M_DATA_FOLLOWS Input data follows. The next call to
SMG$EXECUTE_COMMAND contains input data
for the currently executing command. Do not
specify this value if this is the last input
data item. If you do specify this value,
ret-status is not returned.
SMG$M_SEND_EOF Send end-of-file marker. The end-of-file
marker is sent to the subprocess.
ret-status
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by reference
Optional status of the executed command, provided that the
commands are not being buffered. The ret-status argument is the
address of an unsigned longword containing this status.
46 – SMG$FIND_CURSOR_DISPLAY
The Find Display that Contains the Cursor routine returns the
identifier of the most recently pasted virtual display that
contains the physical cursor.
Format
SMG$FIND_CURSOR_DISPLAY pasteboard-id ,display-id
[,pasteboard-row] [,pasteboard-column]
46.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
46.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard in which the physical cursor is to be
found. The pasteboard-id argument is the address of an unsigned
longword that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the identifier of the display in which the physical
cursor was found. The display-id argument is the address of an
unsigned longword into which the display identifier is written.
pasteboard-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
The row position at which to begin the search for the physical
cursor. The optional pasteboard-row argument is the address of
a signed longword containing the pasteboard row. You can use
pasteboard-row instead of the physical cursor row.
pasteboard-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
The column position at which to begin the search for the physical
cursor. The optional pasteboard-column argument is the address of
a signed longword containing the pasteboard column. You can use
pasteboard-column instead of the physical cursor column.
47 – SMG$FLUSH_BUFFER
The Flush Buffer routine flushes all buffered output to the
terminal.
Format
SMG$FLUSH_BUFFER pasteboard-id
47.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
47.2 – Argument
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard to be flushed. The pasteboard-id
argument is the address of an unsigned longword that contains
the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
48 – SMG$FLUSH_DISPLAY_UPDATE
The Flush Display Update routine flushes any update batching to
the screen and leaves the update batching in effect.
Format
SMG$FLUSH_DISPLAY_UPDATE display-id
48.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
48.2 – Argument
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to be affected. The display-id
argument is the address of an unsigned longword that contains the
display identifier.
The display argument is returned by SMG$CREATE_VIRTUAL_DISPLAY.
49 – SMG$GET_BROADCAST_MESSAGE
The Get Broadcast Message routine determines whether a message
has been broadcast to the pasteboard and returns the message.
Format
SMG$GET_BROADCAST_MESSAGE pasteboard-id [,message]
[,message-length] [,message-type]
49.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
49.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard to be checked for the presence of a
broadcast message. The pasteboard-id argument is the address of
an unsigned longword that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
message
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
A string that receives the broadcast message, if such a message
is available. The message argument is the address of a descriptor
that points to the string into which the message text is written.
If this argument is omitted, the broadcast message is discarded.
message-length
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Receives the actual length of the broadcast message. The message-
length argument is the address of an unsigned word into which is
written the length of the message.
message-type
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Receives the type of broadcast message. The message-type argument
is the address of an unsigned word into which is written the type
of message. Values for message-type are defined by the $MSGDEF
library definition. If the value for message-type is not MSG$_
TRMBRDCST, the condition value returned is SMG$_NOBRDMSG.
50 – SMG$GET_CHAR_AT_PHYSICAL_CURSOR
The Return Character at Cursor routine returns the character at
the current physical cursor position.
Format
SMG$GET_CHAR_AT_PHYSICAL_CURSOR pasteboard-id ,character-code
[,rendition] [,user-rendition]
50.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
50.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard from which to retrieve the character.
The pasteboard-id argument is the address of an unsigned longword
that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
character-code
OpenVMS usage:byte_unsigned
type: byte (unsigned)
access: write only
mechanism: by reference
Returned character code. The character-code argument is the
address of an unsigned byte into which is written the character's
ASCII code.
rendition
OpenVMS usage:byte_unsigned
type: byte (unsigned)
access: write only
mechanism: by reference
Receives the rendition code associated with the character code
returned by the character-code argument. The rendition argument
is the address of an unsigned byte into which is written the
rendition code.
user-rendition
OpenVMS usage:byte_unsigned
type: byte (unsigned)
access: write only
mechanism: by reference
Receives the user rendition code associated with the character
code returned by the character-code argument. The user-rendition
argument is the address of an unsigned byte into which is written
the user rendition code.
51 – SMG$GET_DISPLAY_ATTR
The Get Display Attributes routine receives the attributes
associated with a virtual display.
Format
SMG$GET_DISPLAY_ATTR display-id [,height] [,width]
[,display-attributes] [,video-attributes]
[,character-set] [,flags]
51.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
51.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display for which information is requested.
The display-id argument is the address of an unsigned longword
that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
height
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Receives the number of rows in the display. The optional height
argument is the address of a signed longword into which the
height is written.
width
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Receives the number of columns in the display. The optional
width argument is the address of a signed longword into which
is written the number of columns in the display.
display-attributes
OpenVMS usage:mask_longword
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the current default display attributes. The optional
display-attributes argument is the address of an unsigned
longword into which the current display attributes are written.
Valid values for display-attributes are as follows:
SMG$M_BORDER Specifies a bordered display. If omitted, the
display is not bordered.
SMG$M_BLOCK_ Specifies a block bordered display. If
BORDER omitted, the display is not bordered.
SMG$M_DISPLAY_ Specifies that control characters such as
CONTROLS carriage return and line feed are displayed as
graphic characters, if your terminal supports
them.
SMG$M_TRUNC_ICON Specifies that an icon (generally a diamond
shape) is displayed where truncation of a line
exceeding the width of the virtual display has
occurred.
video-attributes
OpenVMS usage:mask_longword
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the current default video attributes. The optional
video-attributes argument is the address of an unsigned longword
into which the current video attributes are written.
Valid video attributes are as follows:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_UNDERLINE Displays underlined characters.
SMG$M_INVISIBLE Specifies invisible characters; that is, the
characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the default character set for all text in this virtual
display. The optional character-set argument is the address of an
unsigned longword that specifies the character set. Valid values
are SMG$C_ASCII (the default) and SMG$C_SPEC_GRAPHICS.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: write only
mechanism: by reference
Optional bit mask specifying attributes of the specified display.
The flags argument is the address of an unsigned longword
containing the flag. Valid values for flags are as follows:
SMG$M_SUBPROCESS Display has a subprocess attached to it.
SMG$M_MENU Display contains a menu.
SMG$M_VIEWPORT Display contains a viewport.
52 – SMG$GET_KEYBOARD_ATTRIBUTES
The Get Keyboard Attributes routine gets information about a
virtual keyboard and leaves it in a user-supplied area: the
keyboard information table (KIT).
Format
SMG$GET_KEYBOARD_ATTRIBUTES keyboard-id ,keyboard-info-table
,keyboard-info-table-size
52.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
52.2 – Arguments
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Keyboard identifier. The keyboard-id argument is the address of
an unsigned longword containing the identifier of the virtual
keyboard from which to read.
Create a virtual keyboard by calling the SMG$CREATE_VIRTUAL_
KEYBOARD routine.
keyboard-info-table
OpenVMS usage:unspecified
type: unspecified
access: write only
mechanism: by reference, array reference
Receives the keyboard attributes. The keyboard-info-table
argument is the address of a data block into which the keyboard
attributes are written.
The KIT is a byte block whose size and field references are
described in $SMGDEF. It is the caller's responsibility to
allocate the correct size block and to pass its address to this
routine.
The values in the keyboard-info-table can be accessed through the
following symbolic names:
SMG$L_DEV_CHAR Device characteristics (longword)
SMG$L_DEV_DEPEND Specific characteristics 1 (longword)
SMG$L_DEV_DEPEND2 Specific characteristics 2 (longword)
SMG$L_DEV_DEPEND3 Specific characteristics 3 (longword)
SMG$B_DEV_CLASS Device class (byte) - for example, DC$_TERM
SMG$B_RECALL_NUM Size of recall buffer (byte)*
SMG$B_DEVTYPE Physical device type (byte) - for example,
TT$_VT100
SMG$B_TYPEAHD_ First character in type-ahead buffer (byte)*
CHAR
SMG$W_NUM_COLUMNS Terminal width (word)
SMG$W_TYPEAHD_CNT Number of characters in type-ahead buffer
(word)*
Items marked with an asterisk (*) will be zero unless the device
is a terminal (DEVCLASS = DC$_TERM).
keyboard-info-table-size
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Size of the keyboard information table. The keyboard-info-table-
size argument is the address of an unsigned longword containing
the size of the KIT in bytes.
The size you specify must be exact. You can specify this size
with the symbolic constant SMG$C_KEYBOARD_INFO_BLOCK.
53 – SMG$GET_KEY_DEF
The Get Key Definition routine returns the key definition for a
specified key.
Format
SMG$GET_KEY_DEF key-table-id ,key-name [,if-state]
[,attributes] [,equivalence-string]
[,state-string]
53.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
53.2 – Arguments
key-table-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the key table from which you are extracting a
definition. The key-table-id argument is the address of an
unsigned longword that contains the key table identifier.
The key table identifier is returned by SMG$CREATE_KEY_TABLE.
key-name
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Specifies the name of the key associated with the definition. The
key-name argument is the address of a descriptor pointing to the
key name.
if-state
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Specifies the current state name in effect after the key is
pressed. The if-state argument is the address of a descriptor
pointing to the state name.
See SMG$ADD_KEY_DEF for more information.
attributes
OpenVMS usage:mask_longword
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the attributes bit mask for this key definition. The
attributes argument is the address of a longword into which is
written the bit mask describing the key's attributes.
Valid values are as follows:
SMG$M_KEY_NOECHO If set, this bit specifies that equiv_string
is not to be echoed when this key is pressed.
If clear, equiv_string is echoed. If SMG$M_
KEY_TERMINATE is not set, SMG$M_KEY_NOECHO is
ignored.
SMG$M_KEY_ If set, this bit specifies that when this key
TERMINATE is pressed (as qualified by if-state), the
input line is complete and more characters
should not be accepted. If clear, more
characters may be accepted.
SMG$M_KEY_ If set, and if state-string is specified, the
LOCKSTATE state name specified by state-string remains
at the current state until explicitly changed
by a subsequent keystroke whose definition
includes a state-string. If clear, the state
name specified by state-string remains in
effect only for the next defined key stroke.
SMG$M_KEY_ If set, this bit specifies that this key
PROTECTED definition cannot be modified or deleted.
If clear, the key definition can be modified
or deleted.
equivalence-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
Receives the equivalence string for this key definition. The
equivalence-string argument is the address of a descriptor
pointing to the string into which is written the equivalence
string.
state-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
Receives the new state name, if any, which is set by this
key definition. The state-string argument is the address of a
descriptor pointing to the string into which is written the new
state string.
54 – SMG$GET_NUMERIC_DATA
The Get Numeric Terminal Data routine accesses TERMTABLE.EXE and
returns the value associated with a specified Boolean or numeric
capability.
Format
SMG$GET_NUMERIC_DATA termtable-address ,request-code
,buffer-address
54.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
54.2 – Arguments
termtable-address
OpenVMS usage:address
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the address of the TERMTABLE entry for the desired
terminal. The termtable-address argument is the address of an
unsigned longword that contains the address of the terminal
capabilities table (TERMTABLE).
Before calling SMG$GET_NUMERIC_DATA, you must obtain this
terminal table address by calling either SMG$INIT_TERM_TABLE
or SMG$INIT_TERM_TABLE_BY_TYPE.
request-code
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Request code that specifies the desired capability. The request-
code argument is an unsigned longword constant containing this
request code. The request code is of the form SMG$K_code, where
code corresponds to a keyword in the terminal capabilities table
(TERMTABLE), for example, ANSI_CRT. The SMG$K_code constants can
be found in the library supplied by Compaq, $SMGTRMPTR.
buffer-address
OpenVMS usage:address
type: longword (unsigned)
access: write only
mechanism: by reference
Address of the first byte of the longword to which SMG$GET_
NUMERIC_DATA writes the numeric capability data. The buffer-
address argument is an unsigned longword that contains the
address of this buffer.
55 – SMG$GET_PASTEBOARD_ATTRIBUTES
The Get Pasteboard Attributes routine gets pasteboard attributes
and stores them in the pasteboard information table.
Format
SMG$GET_PASTEBOARD_ATTRIBUTES pasteboard-id
,pasteboard-info-table
,pasteboard-info-table-size
55.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
55.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard for which information is requested. The
pasteboard-id argument is the address of an unsigned longword
that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
pasteboard-info-table
OpenVMS usage:unspecified
type: unspecified
access: write only
mechanism: by reference, array reference
Receives the pasteboard attributes. The pasteboard-info-table
argument is the address of a data structure into which are
written the pasteboard attributes.
The values in the pasteboard-info-table can be accessed through
the following symbolic names:
SMG$L_DEVCHAR Device characteristics (longword).
SMG$L_DEVDEPEND Specific characteristics 1 (longword).
SMG$L_ Specific characteristics 2 (longword).
DEVDEPEND2
SMG$L_ Specific characteristics 3 (longword).
DEVDEPEND3
SMG$B_DEVCLASS Device class (byte)-for example, DC$_TERM.
SMG$B_SMG_ Internal SMG device type (byte). The four
DEVTYPE possible values for SMG$B_SMG_DEVTYPE are as
follows:
SMG$K_UNKNOWN
SMG$K_VTFOREIGN
SMG$K_HARDCOPY
SMG$K_VTTERMTABLE
SMG$B_PHY_ Physical device type (byte)-for example, TT$_
DEVTYPE VT100. The possible values for SMG$B_PHY_DEVTYPE
are defined in $TTDEF in STARLET.
SMG$B_ROWS Number of rows on pasteboard (byte).
SMG$W_WIDTH Pasteboard width (word).
SMG$B_COLOR Background color setting (byte). Valid values
for SMG$B_COLOR are as follows:
SMG$C_COLOR_ Unknown background color
UNKNOWN
SMG$C_COLOR_WHITE Light background
SMG$C_COLOR_BLACK Dark background
SMG$C_COLOR_BLUE Blue background
SMG$C_COLOR_CYAN Cyan (green-blue) background
SMG$C_COLOR_GREEN Green background
SMG$C_COLOR_ Magenta background
MAGENTA
SMG$C_COLOR_RED Red background
SMG$C_COLOR_ Yellow background
YELLOW
SMG$C_COLOR_LIGHT White background
SMG$C_COLOR_DARK Black background
SMG$C_COLOR_USER1 User-defined background 1
SMG$C_COLOR_USER2 User-defined background 2
SMG$B_PARITY Parity attributes (byte)-this field is zero if
the pasteboard is not a terminal.
SMG$W_SPEED Terminal speed (word)-this field is zero if the
pasteboard is not a terminal.
SMG$W_FILL Fill characteristics (word)-this field is zero
if the pasteboard is not a terminal.
SMG$W_PHYS_ Pasteboard row containing physical cursor
CURSOR_ROW (word).
SMG$W_PHYS_ Pasteboard column containing physical cursor
CURSOR_COL (word).
SMG$L_CURSOR_ Display identifier of topmost display containing
DID physical cursor (longword).
pasteboard-info-table-size
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the number of bytes in the pasteboard information
table. The pasteboard-info-table-size argument is the address
of an unsigned longword that contains the size (in bytes) of the
pasteboard information table.
The size you specify must be exact. You can specify this size
with the symbolic constant SMG$C_PASTEBOARD_INFO_BLOCK.
56 – SMG$GET_PASTING_INFO
Provided that the specified virtual display is currently pasted,
the Return Pasting Information routine returns the row and column
of the pasting.
Format
SMG$GET_PASTING_INFO display-id ,pasteboard-id ,flags
[,pasteboard-row] [,pasteboard-column]
56.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
56.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display to be examined. The display-id
argument is the address of an unsigned longword containing the
identifier of this virtual display.
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the pasteboard on which the virtual display is
pasted. The pasteboard-id argument is the address of an unsigned
longword containing the identifier of this pasteboard.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: write only
mechanism: by reference
Bit mask indicating the status of the specified virtual display
with respect to the specified pasteboard. The flags argument is
the address of an unsigned longword that contains the flag. Valid
values for flags are as follows:
0 The virtual display is not pasted to the
specified pasteboard.
SMG$M_DISPLAY_ The virtual display specified by display-id
PASTED is pasted to the pasteboard specified by the
pasteboard-id argument.
pasteboard-row
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Row of the pasteboard that contains row 1 of the specified
virtual display. The optional pasteboard-row argument is the
address of a signed longword containing the number of the
pasteboard row that contains the first row of the virtual
display.
pasteboard-column
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Column of the pasteboard that contains column 1 of the specified
virtual display. The optional pasteboard-column argument is
the address of a signed longword containing the number of the
pasteboard column that contains the first column of the virtual
display.
57 – SMG$GET_TERM_DATA
The Get Terminal Data routine accesses TERMTABLE.EXE and returns
the character sequence that causes a terminal to perform a
specified operation.
Format
SMG$GET_TERM_DATA termtable-address ,request-code
,maximum-buffer-length ,return-length
,capability-data [,input-argument-vector]
57.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
57.2 – Arguments
termtable-address
OpenVMS usage:address
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the address of the TERMTABLE entry for the desired
terminal. The termtable-address argument is the address of an
unsigned longword that contains the address of the terminal
capabilities table (TERMTABLE).
The TERMTABLE address is returned by SMG$INIT_TERM_TABLE or
SMG$INIT_TERM_TABLE_BY_TYPE.
request-code
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Longword constant of the form SMG$K_code, where code is the name
of the desired capability field. The request-code argument is
the address of a signed longword that contains the request code.
The SMG$K_code constants can be found in the library supplied by
Compaq, $SMGTRMPTR.
maximum-buffer-length
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Maximum length of the buffer into which the requested capability
data is written. The maximum-buffer-length argument is the
address of a signed longword that contains the maximum number
of bytes that can be written into the buffer.
return-length
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Receives the number of bytes actually written into the buffer.
The return-length argument is the address of a signed longword
into which is written the number of bytes transferred into the
buffer.
capability-data
OpenVMS usage:unspecified
type: unspecified
access: by reference, array reference
mechanism: 0
Address of the first byte of the buffer which is to receive
the capability data. The capability-data argument contains the
address of the buffer.
input-argument-vector
OpenVMS usage:vector_longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference, array reference
Address of a list of longwords used for capabilities that require
a variable number of arguments, and for those that require
substitution or arithmetic operations on an argument. The input-
argument-vector argument is the address of an array of unsigned
longwords that contains capability arguments. The first longword
must contain the number of arguments that follow.
58 – SMG$GET_VIEWPORT_CHAR
The Get Characteristics of Display Viewport routine returns the
characteristics of the specified viewport.
Format
SMG$GET_VIEWPORT_CHAR display-id [,viewport-row-start]
[,viewport-column-start]
[,viewport-number-rows]
[,viewport-number-columns]
58.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
58.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display associated with the viewport.
The display-id argument is the address of an unsigned longword
containing this identifier.
viewport-row-start
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Optional argument that receives the starting row number of the
viewport. The viewport-row-start argument is the address of a
signed longword that receives this row number.
viewport-column-start
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Optional argument that receives the starting column number of
the specified viewport. The viewport-column-start argument is the
address of a signed longword that receives this column number.
viewport-number-rows
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Optional argument that receives the number of rows in the
specified viewport. The viewport-number-rows argument is the
address of a signed longword that receives this number.
viewport-number-columns
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Optional argument that receives the number of columns in the
specified viewport. The viewport-number-columns argument is the
address of a signed longword that receives this number.
59 – SMG$HOME_CURSOR
The Home Cursor routine moves the virtual cursor to the specified
corner of a virtual display.
Format
SMG$HOME_CURSOR display-id [,position-code]
59.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
59.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display in which the virtual cursor is
moved. The display-id argument is the address of a longword that
contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
position-code
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the point to which the virtual cursor moves. The
position-code argument is the address of a longword that contains
the position code.
Valid codes for position-code are as follows:
Code Meaning
SMG$C_UPPER_LEFT Row 1, column 1 (the upper left corner).
This is the default if position-code is not
specified.
SMG$C_LOWER_LEFT Row n, column 1 (where n is the number of
rows in the display). That is, the lower left
corner. It is useful to specify this position
when accepting input for an upward-scrolling
virtual display.
SMG$C_UPPER_RIGHT Row 1, column m (where m is the number of
columns in the display). That is, the upper
right corner.
SMG$C_LOWER_RIGHT Row n, column m (where n is the number of
rows and m is the number of columns in the
display). That is, the lower right corner.
60 – SMG$INIT_TERM_TABLE
The Initialize Terminal Table routine initializes the TERMTABLE
database for the terminal named, so that subsequent calls to
SMG$GET_TERM_DATA can extract information and command strings for
that terminal.
Format
SMG$INIT_TERM_TABLE terminal-name, termtable-address
60.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
60.2 – Arguments
terminal-name
OpenVMS usage:device_name
type: character string
access: read only
mechanism: by descriptor
Specifies the name of the terminal. The terminal-name argument
is the address of a descriptor pointing to the terminal name. The
name must be an entry in TERMTABLE.EXE.
termtable-address
OpenVMS usage:address
type: longword (unsigned)
access: write only
mechanism: by reference
Address of the entry for a particular type of terminal in
TERMTABLE.EXE. The termtable-address argument is the address
of an unsigned longword that contains the address of the terminal
capabilities table.
You use this address when calling the SMG$GET_TERM_DATA procedure
for the specified type of terminal. The TERMTABLE address is also
returned by SMG$INIT_TERM_TABLE_BY_TYPE.
61 – SMG$INIT_TERM_TABLE_BY_TYPE
The Initialize TERMTABLE by OpenVMS Terminal Type routine
initializes the TERMTABLE database for the terminal named,
so that subsequent calls to SMG$GET_TERM_DATA can extract
information and command strings for that terminal.
Format
SMG$INIT_TERM_TABLE_BY_TYPE terminal-type ,termtable-address
[,terminal-name]
61.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
61.2 – Arguments
terminal-type
OpenVMS usage:byte_signed
type: byte (signed)
access: read only
mechanism: by reference
The device type of the terminal, as designated by an OpenVMS
symbolic terminal type or by another value returned by the
$GETDVI system service. The terminal-type argument is the address
of a signed byte that contains the terminal type.
termtable-address
OpenVMS usage:address
type: longword (unsigned)
access: write only
mechanism: by reference
Address of the entry for a particular type of terminal in
TERMTABLE.EXE. The termtable-address argument is the address
of an unsigned longword into which is written the address of a
terminal entry.
Use this address when calling the SMG$GET_TERM_DATA procedure for
the specified type of terminal.
terminal-name
OpenVMS usage:device_name
type: character string
access: write only
mechanism: by descriptor
A string into which is written the terminal name associated with
the device type. The terminal-name argument is the address of a
descriptor pointing to the string into which the terminal name is
written.
62 – SMG$INSERT_CHARS
The Insert Characters routine inserts characters into a virtual
display.
Format
SMG$INSERT_CHARS display-id ,character-string ,start-row
,start-column [,rendition-set]
[,rendition-complement] [,character-set]
62.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
62.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display affected. The display-id argument
is the address of an unsigned longword that contains the display
identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
character-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
The character string to be inserted. The character-string
argument is the address of a descriptor that points to the string
to be inserted.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
The row position at which to begin the insertion. The start-row
argument is the address of a signed longword that contains the
row number.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
The column position at which to begin the insertion. The start-
column argument is the address of a signed longword that contains
the column number.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can
be specified with the rendition-set argument can be complemented
with the rendition-complement argument. The display-id argument
must be specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set code. Valid values are
SMG$C_ASCII (the default) and SMG$C_SPEC_GRAPHICS.
63 – SMG$INSERT_LINE
The Insert Line routine inserts a line into a virtual display and
scrolls the display.
Format
SMG$INSERT_LINE display-id ,start-row [,character-string]
[,direction] [,rendition-set]
[,rendition-complement] [,flags]
[,character-set]
63.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
63.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display affected. The display-id argument
is the address of an unsigned longword that contains the display
identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row number at which the string is inserted and at
which scrolling begins. The start-row argument is the address of
a signed longword that contains the row number.
character-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
The character string to be inserted by SMG$INSERT_LINE. The
character-string argument is the address of a descriptor pointing
to this string.
direction
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the scrolling direction. The direction argument is
the address of a longword bit mask that contains the direction
code. Valid values are SMG$M_UP and SMG$M_DOWN. SMG$M_UP is the
default.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can
be specified with the rendition-set argument can be complemented
with the rendition-complement argument. The display-id argument
must be specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies the action to take if the text
does not fit on the line. The flags argument is the address of an
unsigned longword that contains the flag. Valid values for flags
are as follows:
0 Does not wrap (the default)
SMG$M_WRAP_CHAR Wraps at the last character on the line
SMG$M_WRAP_WORD Wraps at the last space on the line
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set code. Valid values are
SMG$C_ASCII (the default) and SMG$C_SPEC_GRAPHICS.
64 – SMG$INVALIDATE_DISPLAY
The Mark a Display as Invalid routine marks a display as invalid
and causes the entire display to be redrawn.
Format
SMG$INVALIDATE_DISPLAY display-id
64.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
64.2 – Argument
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display affected. The display-id argument
is the address of an unsigned longword that contains the display
identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
65 – SMG$KEYCODE_TO_NAME
The Translate a Key Code into a Key Name routine translates the
key code of a key on the keyboard into its associated key name.
Format
SMG$KEYCODE_TO_NAME key-code ,key-name
65.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
65.2 – Arguments
key-code
OpenVMS usage:word_unsigned
type: word (unsigned)
access: read only
mechanism: by reference
Specifies the key code to translate into a key name. The key-code
argument is the address of an unsigned word that contains the key
code.
The key code is returned by SMG$READ_COMPOSED_LINE, SMG$READ_
KEYSTROKE, SMG$READ_STRING, and SMG$READ_VERIFY in the word-
terminator-code argument.
key-name
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
String containing the name of the key into which key-code is
to be translated. The key-name argument is the address of a
descriptor pointing to the character string containing the key
name. The key-name argument is simply the name of the key (for
example, COMMA, PERIOD, KP4, and so forth).
66 – SMG$LABEL_BORDER
The Label a Virtual Display Border routine supplies a label for a
virtual display's border.
Format
SMG$LABEL_BORDER display-id [,text] [,position-code] [,units]
[,rendition-set] [,rendition-complement]
[,character-set]
66.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
66.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display affected. The display-id argument
is the address of an unsigned longword that contains the display
identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
text
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
The new label for this display's border. The text argument is
the address of a descriptor pointing to the label text. If this
string is supplied, it replaces the current label text for this
border. If omitted, the display is not labeled.
position-code
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies which of the display's borders contains the label. The
position-code argument is the address of an unsigned longword
that contains the position code.
Valid positions are as follows:
o SMG$K_TOP
o SMG$K_BOTTOM
o SMG$K_RIGHT
o SMG$K_LEFT
If this argument is omitted, the label is displayed on the top
border.
units
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the character position at which the label begins
within the border. The units argument is the address of a signed
longword that contains the character position. If omitted, the
label is centered in the specified border.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can
be specified with the rendition-set argument can be complemented
with the rendition-complement argument. The display-id argument
must be specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set code. Valid values are
SMG$C_ASCII (the default) and SMG$C_SPEC_GRAPHICS.
67 – SMG$LIST_KEY_DEFS
The List Key Definitions routine returns, one at a time, the
definitions (equivalence strings) associated with specified keys
in a specified key definition table.
Format
SMG$LIST_KEY_DEFS key-table-id ,context [,key-name]
[,if-state] [,attributes]
[,equivalence-string] [,state-string]
67.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
67.2 – Arguments
key-table-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the key definition table from which you are extracting
a key definition. The key-table-id argument is the address of an
unsigned longword that contains the key table identifier.
The key definition table identifier is returned by SMG$CREATE_
KEY_TABLE.
context
OpenVMS usage:context
type: longword (unsigned)
access: modify
mechanism: by reference
Provides a means to extract a series of key definitions from a
key definition table. The context argument is the address of an
unsigned longword that contains the context variable. For the
first call to this routine, you should set the context argument
to zero.
The context argument is incremented by the SMG$LIST_KEY_DEFS
routine so that the next call returns the next key definition.
key-name
OpenVMS usage:char_string
type: character string
access: modify
mechanism: by descriptor
Identifies the key whose value you are listing. The key-name
argument is the address of a descriptor pointing to the key name.
if-state
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
Receives the state name which qualifies the next definition in
the key definition table. The if-state argument is the address of
a descriptor pointing to the string into which the state name is
written.
attributes
OpenVMS usage:mask_longword
type: longword (unsigned)
access: write only
mechanism: by reference
Attributes of this key definition. The attributes argument is the
address of an unsigned longword into which the key attributes are
written.
Possible attributes are as follows:
SMG$M_KEY_NOECHO If set, this bit specifies that equiv_string
is not to be echoed when this key is pressed;
if clear, equiv_string is echoed. If SMG$M_
KEY_TERMINATE is not set, SMG$M_KEY_NOECHO is
ignored.
SMG$M_KEY_ If set, this bit specifies that when this key
TERMINATE is pressed (as qualified by if-state), the
input line is complete and more characters
should not be accepted. If clear, more
characters may be accepted.
SMG$M_KEY_ If set, and if state-string is specified, the
LOCKSTATE state name specified by state-string remains
at the current state until explicitly changed
by a subsequent keystroke whose definition
includes a state-string. If clear, the state
name specified by state-string remains in
effect only for the next defined keystroke.
SMG$M_KEY_ If set, this bit specifies that this key
PROTECTED definition cannot be modified or deleted.
If clear, the key definition can be modified
or deleted.
equivalence-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
The character string into which the equivalence string is written
for the next key definition. The equivalence-string argument is
the address of a descriptor pointing to the string into which
equivalence-string is written.
state-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
A string into which is written the new state name, if any, set by
the next key definition. The state-string argument is the address
of a descriptor pointing to the string into which the state name
is written. If this key definition sets a state, the attributes
flag SMG$M_KEY_SETSTATE is also set.
68 – SMG$LIST_PASTEBOARD_ORDER
The Return Pasting Information routine returns the pasteboard
identifier of the pasteboard to which the specified virtual
display is pasted. Optionally, the pasteboard row 1 and column
1 (origins) of the virtual display are also returned.
Format
SMG$LIST_PASTEBOARD_ORDER display-id ,context
,pasteboard-id [,pasteboard-row]
[,pasteboard-column]
68.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
68.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier of the virtual display that is pasted. The
display-id argument is the address of an unsigned longword
containing the identifier of this display.
context
OpenVMS usage:context
type: longword (unsigned)
access: modify
mechanism: by reference
Context to search. The context argument is the address of
an unsigned longword containing this context. On the initial
call, you should set context to zero. SMG$LIST_PASTEBOARD_ORDER
updates the value of context. The updated value should then be
passed on the subsequent calls to obtain the next pasted display
identifier.
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the identifier of the pasteboard on which the virtual
display is pasted. The pasteboard-id argument is the address
of an unsigned longword containing the identifier of this
pasteboard.
pasteboard-row
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Row of the pasteboard that contains row 1 of the specified
virtual display. The optional pasteboard-row argument is the
address of a signed longword containing the number of the
pasteboard row that contains the first row of the virtual
display.
pasteboard-column
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Column of the pasteboard that contains column 1 of the specified
virtual display. The optional pasteboard-column argument is
the address of a signed longword containing the number of the
pasteboard column that contains the first column of the virtual
display.
69 – SMG$LIST_PASTING_ORDER
The Return Virtual Display Pasting Information routine returns
the identifiers of the virtual displays pasted to a specified
pasteboard. Optionally, the pasteboard row 1 and column 1
(origins) of the virtual displays are also returned.
Format
SMG$LIST_PASTING_ORDER pasteboard-id ,context ,display-id
[,pasteboard-row] [,pasteboard-column]
69.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
69.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the pasteboard on which the virtual display is
pasted. The pasteboard-id argument is the address of an unsigned
longword containing the identifier of this pasteboard.
context
OpenVMS usage:context
type: longword (unsigned)
access: modify
mechanism: by reference
Context to search. The context argument is the address of an
unsigned longword containing this context. On the initial call,
you should set context to zero. SMG$LIST_PASTING_ORDER updates
the value of context. The updated value should then be passed on
subsequent calls to obtain the next pasted display identifier.
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: write only
mechanism: by reference
Identifier of the virtual display that is pasted. The display-id
argument is the address of an unsigned longword containing the
identifier of this virtual display.
pasteboard-row
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Row of the pasteboard that contains row 1 of the specified
virtual display. The optional pasteboard-row argument is the
address of a signed longword containing the number of the
pasteboard row that contains the first row of the virtual
display.
pasteboard-column
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Column of the pasteboard that contains column 1 of the specified
virtual display. The optional pasteboard-column argument is
the address of a signed longword containing the number of the
pasteboard column that contains the first column of the virtual
display.
70 – SMG$LOAD_KEY_DEFS
The Load Key Definitions routine loads a file of key definitions
(DEFINE/KEY commands) into a specified key table.
Format
SMG$LOAD_KEY_DEFS key-table-id ,filespec [,default-filespec]
[,flags]
70.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
70.2 – Arguments
key-table-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the key table into which you are loading key
definitions. The key-table-id argument is the address of an
unsigned longword that contains the key table identifier.
The key table identifier is returned by SMG$CREATE_KEY_TABLE.
filespec
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String containing the file specification for the file of
DEFINE/KEY commands. The filespec argument is the address of a
descriptor pointing to the file specification.
default-filespec
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String containing the default file specification for the file of
DEFINE/KEY commands. The default-filespec argument is the address
of a descriptor pointing to the default file specification. If
omitted, the null string is used.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies whether filespec is to be
treated as a logical name. The flags argument is the address
of an unsigned longword that contains the flag. If set, flags
specifies that filespec should be translated, but if this is not
possible, that the null string be used.
71 – SMG$LOAD_VIRTUAL_DISPLAY
The Load a Virtual Display from a File routine creates a new
virtual display and loads it with a virtual display saved with
SMG$SAVE_VIRTUAL_DISPLAY.
Format
SMG$LOAD_VIRTUAL_DISPLAY display-id [,filespec]
71.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
71.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: write only
mechanism: by reference
Identifier of the new virtual display to be loaded with the
saved virtual display. The display-id argument is the address
of an unsigned longword into which is written the new display
identifier.
filespec
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String containing the file specification of the file in which the
specified virtual display is saved. The filespec argument is a
character string containing the file specification.
If filespec is omitted, SMG$LOAD_VIRTUAL_DISPLAY searches for the
default file specification SMGDISPLY.DAT.
72 – SMG$MOVE_TEXT
The Move Text from One Virtual Display to Another routine moves
a rectangle of text from one virtual display to another virtual
display. Given two points in opposite corners of the rectangle,
SMG$MOVE_TEXT determines the desired width and height of the new
virtual display.
Format
SMG$MOVE_TEXT display-id ,top-left-row ,top-left-column
,bottom-right-row ,bottom-right-column
,display-id2 [,top-left-row2]
[,top-left-column2] [,flags]
72.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
72.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display from which text is to be moved. The
display-id argument is the address of an unsigned longword that
contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
top-left-row
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Top left row of the rectangle of text you want to move. The
top-left-row argument is the address of an unsigned longword
containing the row number.
top-left-column
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Top left column of the rectangle of text you want to move. The
top-left-column argument is the address of an unsigned longword
containing the column number.
bottom-right-row
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Bottom right row of the rectangle of text you want to move. The
bottom-right-row argument is the address of an unsigned longword
containing the row number.
bottom-right-column
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Bottom right column of the rectangle of text you want to move.
The bottom-right-column argument is the address of an unsigned
longword containing the column number.
display-id2
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to which the text is to be moved.
The display-id2 argument is the address of an unsigned longword
that contains the display identifier.
The display identifier display-id2 is returned by SMG$CREATE_
VIRTUAL_DISPLAY.
top-left-row2
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Top left row of the rectangle that is the destination of the
text you want to move. The optional top-left-row2 argument is the
address of an unsigned longword containing the row number. If you
do not specify a value for top-left-row2, the text is moved to
the current virtual cursor row.
top-left-column2
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Top left column of the rectangle that is the destination of the
text you want to move. The optional top-left-column2 argument is
the address of an unsigned longword containing the column number.
If you do not specify a value for top-left-column2, the text is
moved to the current virtual cursor column.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies the action to take when moving
the specified text. The flags argument is the address of an
unsigned longword that contains the flag. The flags argument
accepts the following values:
SMG$M_TEXT_SAVE Does not erase the text after moving.
SMG$M_TEXT_ONLY Moves the text but not the attributes.
73 – SMG$MOVE_VIRTUAL_DISPLAY
The Move Virtual Display routine relocates a virtual display on a
pasteboard and preserves the pasting order.
Format
SMG$MOVE_VIRTUAL_DISPLAY display-id ,pasteboard-id
,pasteboard-row ,pasteboard-column
[,top-display-id]
73.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
73.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to be moved. The display-id
argument is the address of an unsigned longword that contains
the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard on which the movement is to take place.
The pasteboard-id argument is the address of an unsigned longword
that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
pasteboard-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row of the pasteboard that is to contain row
1 of the new location of the specified virtual display. The
pasteboard-row argument is the address of a signed longword that
contains the row number.
pasteboard-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column of the pasteboard that is to contain column
1 of the specified virtual display. The pasteboard-column
argument is the address of a signed longword that contains the
column number.
top-display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display under which the moving display-
id will be pasted. The top-display-id argument is the address
of an unsigned longword containing the specified virtual display
identifier. Note that the use of the top-display-id argument
is only valid when the virtual display specified by display-id
is not currently pasted and the virtual display specified by
top-display-id is pasted.
74 – SMG$NAME_TO_KEYCODE
The Translate a Key Name into a Key Code routine translates the
key name of a key on the keyboard into its associated key code.
Format
SMG$NAME_TO_KEYCODE key-name ,key-code
74.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
74.2 – Arguments
key-name
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String containing the name of the key to be translated into a
key code. The key-name argument is the address of a descriptor
pointing to the character string containing the key name. The
key-name argument is simply the name of the key (for example,
COMMA, PERIOD, KP4, and so forth).
key-code
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Specifies the key code into which key-name is to be translated.
The key-code argument is the address of an unsigned word that
contains the key code.
The key code is returned by SMG$READ_COMPOSED_LINE, SMG$READ_
KEYSTROKE, SMG$READ_STRING, and SMG$READ_VERIFY in the word-
terminator-code argument.
75 – SMG$PASTE_VIRTUAL_DISPLAY
The Paste Virtual Display routine pastes a virtual display to a
pasteboard.
Format
SMG$PASTE_VIRTUAL_DISPLAY display-id ,pasteboard-id
[,pasteboard-row]
[,pasteboard-column]
[,top-display-id]
75.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
75.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to be pasted. The display-id
argument is the address of an unsigned longword that contains
the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard to which the display is to be pasted.
The pasteboard-id argument is the address of an unsigned longword
that contains the pasteboard identifier.
pasteboard-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row of the pasteboard that is to contain row 1 of
the specified virtual display. The pasteboard-row argument is the
address of a signed longword that contains the row number.
If pasteboard-row is omitted, the last row to which the virtual
display was pasted (on any pasteboard) is used. If pasteboard-row
is omitted and the virtual display was not previously pasted,
then row 1 is used.
pasteboard-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column of the pasteboard that is to contain column
1 of the specified virtual display. The pasteboard-column
argument is the address of a signed longword that contains the
column number.
If pasteboard-column is omitted, the last column to which the
virtual display was pasted (on any pasteboard) is used. If
pasteboard-column is omitted and the virtual display was not
previously pasted, then column 1 is used.
top-display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display under which to paste display-
id. The optional top-display-id argument is the address of an
unsigned longword containing this identifier. Note that the
virtual display specified by top-display-id must already be
pasted.
76 – SMG$POP_VIRTUAL_DISPLAY
The Delete a Series of Virtual Displays routine deletes a
specified virtual display and all displays that were pasted on
the specified pasteboard on top of the specified virtual display.
Format
SMG$POP_VIRTUAL_DISPLAY display-id ,pasteboard-id
76.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
76.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the lowest (first) virtual display to be deleted. The
display-id argument is the address of an unsigned longword that
contains the display identifier. All displays that are higher in
the pasting order (that is, all displays that were pasted after
the specified display) are deleted as well.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard on which the display deletions take
place. The pasteboard-id argument is the address of an unsigned
longword that contains the pasteboard identifier.
77 – SMG$PRINT_PASTEBOARD
The Print Pasteboard Using a Print Queue routine prints the
contents of the specified pasteboard on a line printer.
Format
SMG$PRINT_PASTEBOARD pasteboard-id [,queue-name] [,copies]
[,form-name]
77.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
77.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the pasteboard to be printed. The pasteboard-id
argument is the address of an unsigned longword containing this
identifier.
queue-name
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Optional queue name. The queue-name argument is the address of a
descriptor pointing to the queue name in which to enter the file.
The default is SYS$PRINT.
copies
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional number of copies to print. The copies argument is the
address of a signed longword containing this number. The default
and minimum is one copy.
form-name
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Optional name of the form to use when printing. The form-name
argument is the address of a descriptor pointing to the form
name. The default is "DEFAULT".
78 – SMG$PUT_CHARS
The Write Characters to a Virtual Display routine writes
characters in a virtual display with the text you specify.
Format
SMG$PUT_CHARS display-id ,text [,start-row]
[,start-column] [,flags] [,rendition-set]
[,rendition-complement] [,character-set]
78.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
78.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display affected. The display-id argument
is the address of an unsigned longword that contains the display
identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
text
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Characters to be written to the virtual display. The text
argument is the address of a descriptor pointing to the character
string.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row at which output begins. If start-row is
omitted, output begins on the current row. The start-row argument
is the address of a signed longword that contains the row number.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column at which output begins. If start-column is
omitted, output begins on the current column. The start-column
argument is the address of a signed longword that contains the
column number.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies the action to take before the
specified text is output. The flags argument is the address of
an unsigned longword bit mask that contains the flag. The flags
argument accepts the following values:
0 Does not erase line (the default).
SMG$M_ERASE_TO_ Erases the remaining part of the line.
EOL
SMG$M_ERASE_LINE Erases the entire line.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to be
complemented in the display. All attributes that can be specified
with the rendition-set argument can be complemented with the
rendition-complement argument. The display-id argument must be
specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set code. Valid values are
SMG$C_ASCII (the default) and SMG$C_SPEC_GRAPHICS.
79 – SMG$PUT_CHARS_HIGHWIDE
The Write Double-Height Double-Width Characters routine writes
double-height, double-width (highwide) characters to a virtual
display.
Format
SMG$PUT_CHARS_HIGHWIDE display-id ,text [,start-row]
[,start-column] [,rendition-set]
[,rendition-complement]
[,character-set]
79.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
79.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display affected. The display-id argument
is the address of an unsigned longword that contains the display
identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
text
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Characters to be written to the virtual display. The text
argument is the address of a descriptor pointing to the text.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the line at which output begins. The start-row argument
is the address of a signed longword that contains the line
number. If start-row is omitted or if it is equal to zero, output
begins on the current line.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column at which output begins. The start-column
argument is the address of a signed longword that contains the
column number. If start-column is omitted or if it is equal to
zero, output begins on the current column.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to be
complemented in the display. All attributes that can be specified
with the rendition-set argument can be complemented with the
rendition-complement argument. The display-id argument must be
specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set code. Valid values are
SMG$C_ASCII (the default) and SMG$C_SPEC_GRAPHICS.
80 – SMG$PUT_CHARS_MULTI
The Put Text with Multiple Renditions to Display routine writes
text with multiple renditions to the virtual display.
Format
SMG$PUT_CHARS_MULTI display-id ,text [,start-row]
[,start-column] [,flags]
[,rendition-string]
[,rendition-complement] [,character-set]
80.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
80.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display to be affected. The display-id
argument is the address of an unsigned longword that contains
this identifier.
text
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Text to be output. The text argument is the address of a
descriptor pointing to the output string.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional row number at which to start output. The start-row
argument is the address of a signed longword containing this
number. If omitted, the current row number is used.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional column number at which to start output. The start-column
argument is the address of a signed longword containing this
number. If omitted, the current column number is used.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies the action to take before the
specified text is output. The flags argument is the address of
an unsigned longword that contains the flag. The flags argument
accepts the following values:
0 Does not erase line (the default).
SMG$M_ERASE_TO_ Erases the remaining part of the line.
EOL
SMG$M_ERASE_LINE Erases the entire line.
rendition-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Optional bit mask string that controls the video attributes.
The rendition-string argument is the address of a descriptor
pointing to the bit mask string. Each attribute set causes the
corresponding attribute to be set for the corresponding byte in
the text string in the display. The following attributes can be
specified for each byte using the rendition-string argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
rendition-complement
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Optional bit mask string that controls the video attributes. The
rendition-complement is the address of a descriptor pointing to
the bit mask string. Each attribute set causes the corresponding
attribute to be complemented for the corresponding byte in the
text string in the display.
If the same bit in the same byte is specified in both the
rendition-string and rendition-complement arguments, rendition-
string is evaluated first, followed by rendition-complement.
By using these two parameters together, you can independently
control each attribute in a single routine call. On a single-
attribute basis, you can cause the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set code. Valid values are
SMG$C_ASCII (the default) and SMG$C_SPEC_GRAPHICS.
81 – SMG$PUT_CHARS_WIDE
The Write Double-Width Characters routine writes double-width
characters to a virtual display.
Format
SMG$PUT_CHARS_WIDE display-id ,text [,start-row]
[,start-column] [,rendition-set]
[,rendition-complement] [,character-set]
81.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
81.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display affected. The display-id argument
is the address of an unsigned longword that contains the display
identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
text
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Characters to be written to the virtual display. The text
argument is the address of a descriptor pointing to the text.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the line at which output begins. The start-row argument
is the address of a signed longword that contains the line
number. If start-row is omitted, output begins on the current
line.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column at which output begins. If start-column is
omitted, output begins on the current column. The start-column
argument is the address of a signed longword that contains the
column number.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to be
complemented in the display. All attributes that can be specified
with the rendition-set argument can be complemented with the
rendition-complement argument. The display-id argument must be
specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
character-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set code. Valid values are
SMG$C_ASCII (the default) and SMG$C_SPEC_GRAPHICS.
82 – SMG$PUT_HELP_TEXT
The Output Help Text to the Display routine retrieves and outputs
the help text for the specified topic in the virtual display
provided.
Format
SMG$PUT_HELP_TEXT display-id [,keyboard-id] [,help-topic]
[,help-library] [,rendition-set]
[,rendition-complement]
82.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
82.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier of the virtual display to which the help text
is written. The display-id argument is the address of an unsigned
longword that contains this virtual display identifier. Note that
this display must be pasted and cannot be occluded or batched.
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Optional keyboard identifier of the virtual keyboard used for
input. The keyboard-id argument is the address of an unsigned
longword that contains this virtual keyboard identifier. If the
keyboard-id parameter is not specified, prompting is disabled.
help-topic
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Optional help topic. The help-topic argument is the address of a
descriptor pointing to the help topic string.
help-library
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Optional help library name. The help-library argument is the
address of a descriptor pointing to the help library name. The
default is SYS$HELP:HELPLIB.HLB.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to be
complemented in the display. All attributes that can be specified
with the rendition-set argument can be complemented with the
rendition-complement argument. The display-id argument must be
specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
83 – SMG$PUT_LINE
The Write Line to Virtual Display routine writes a line of text
to a virtual display, beginning at the current virtual cursor
position.
Format
SMG$PUT_LINE display-id ,text [,line-advance] [,rendition-set]
[,rendition-complement] [,flags] [,character-set]
[,direction]
83.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
83.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display affected. The display-id argument
is the address of an unsigned longword that contains the display
identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
text
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
The characters to be written to the virtual display. The text
argument is the address of a descriptor pointing to the text.
line-advance
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of lines to advance after output. The
line-advance argument is the address of a signed longword that
contains the number of lines to advance. The default is 1. If you
specify 0 for line-advance, SMG$PUT_LINE overwrites any existing
text.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to be
complemented in the display. All attributes that can be specified
with the rendition-set argument can be complemented with the
rendition-complement argument. The display-id argument must be
specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies the action to be taken if
the text does not fit on the line. The flags argument is the
address of an unsigned longword that contains the flag. The flags
argument accepts the following values:
0 Does not wrap (default).
SMG$M_WRAP_CHAR Wraps at the last character on the line.
SMG$M_WRAP_WORD Wraps at the last space on the line.
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set code. Valid values are
SMG$C_ASCII (default) and SMG$C_SPEC_GRAPHICS.
direction
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the direction to scroll, if scrolling is necessary.
The direction argument is the address of a longword bit mask that
contains the direction code. Valid values are SMG$M_UP (default)
and SMG$M_DOWN.
84 – SMG$PUT_LINE_HIGHWIDE
The Write Double-Height and Double-Width Line routine writes
a line of text with double-height and double-width (highwide)
characters.
Format
SMG$PUT_LINE_HIGHWIDE display-id ,text [,line-advance]
[,rendition-set] [,rendition-complement]
[,flags] [,character-set]
84.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
84.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier. The display-id argument is the address of
an unsigned longword that contains the display identifier of the
virtual display.
text
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Text to be output. The text argument is the address of the
descriptor pointing to the output string.
line-advance
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Number of lines to advance. The line-advance argument is the
address of a signed longword that contains the number of lines to
advance after the output. This argument is optional.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to be
complemented in the display. All attributes that can be specified
with the rendition-set argument can be complemented with the
rendition-complement argument. The display-id argument must be
specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies the action to be taken if
the text does not fit on the line. The flags argument is the
address of an unsigned longword that contains the flag. The flags
argument accepts the following values:
0 Does not wrap (default).
SMG$M_WRAP_CHAR Wraps at the last character on the line.
SMG$M_WRAP_WORD Wraps at the last space on the line.
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set code. Valid values are
SMG$C_ASCII (default), and SMG$C_SPEC_GRAPHICS.
85 – SMG$PUT_LINE_MULTI
The Write Line with Multiple Renditions to Display routine writes
lines with multiple renditions to the virtual display, optionally
followed by cursor movement sequences.
Format
SMG$PUT_LINE_MULTI display-id ,text ,rendition-string
[,rendition-complement] [,line-advance]
[,flags] [,direction] [,character-set]
85.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
85.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display to be affected. The display-id
argument is the address of an unsigned longword that contains
this identifier.
text
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Text to be output. The text argument is the address of a
descriptor pointing to the output string.
rendition-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Optional bit mask string that controls the video attributes.
The rendition-string argument is the address of a descriptor
pointing to the bit mask string. Each attribute set causes the
corresponding attribute to be set for the corresponding byte in
the text string in the display. The following attributes can be
specified for each byte using the rendition-string argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
rendition-complement
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Optional bit mask string that controls the video attributes. The
rendition-complement is the address of a descriptor pointing to
the bit mask string. Each attribute set causes the corresponding
attribute to be complemented for the corresponding byte in the
text string in the display.
If the same bit in the same byte is specified in both the
rendition-string and rendition-complement arguments, rendition-
string is evaluated first, followed by rendition-complement.
By using these two parameters together, you can independently
control each attribute in a single routine call. On a single-
attribute basis, you can cause the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
line-advance
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional number of lines to advance after output. The line-
advance argument is the address of a signed longword containing
this number.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies the action to take if the text
does not fit on the line. The flags argument is the address of
an unsigned longword that contains the flag. The flags argument
accepts the following values:
0 Does not wrap (default).
SMG$M_WRAP_CHAR Wraps at the last character on the line.
SMG$M_WRAP_WORD Wraps at the last space on the line.
direction
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Optional direction specifier. The direction argument is the
address of an unsigned longword that contains the direction code
specifying the scrolling direction, if scrolling is necessary.
Valid values are SMG$M_UP (default) and SMG$M_DOWN.
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set code. Valid values are
SMG$C_ASCII (default) and SMG$C_SPEC_GRAPHICS.
86 – SMG$PUT_LINE_WIDE
The Write Double-Width Line routine writes a line of double-width
text to a virtual display.
Format
SMG$PUT_LINE_WIDE display-id ,text [,line-advance]
[,rendition-set] [,rendition-complement]
[,flags] [,character-set]
86.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
86.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display affected. The display-id argument
is the address of an unsigned longword that contains the display
identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
text
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Characters to be written to the virtual display. The text
argument is the address of a descriptor pointing to the text.
line-advance
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of lines to advance after output. The line-
advance argument is the address of a signed longword integer that
contains the number of lines to advance.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to be
complemented in the display. All attributes that can be specified
with the rendition-set argument can be complemented with the
rendition-complement argument. The display-id argument must be
specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies the action to take if the text
does not fit on the line. The flags argument is the address of
an unsigned longword that contains the flag. The flags argument
accepts the following values:
0 Does not wrap (default).
SMG$M_WRAP_CHAR Wraps at the last character on the line.
SMG$M_WRAP_WORD Wraps at the last space on the line.
character-set
OpenVMS usage:longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the default character set for all text in this virtual
display. The character-set argument is the address of an unsigned
longword that contains the character set code. Valid values are
SMG$C_ASCII (default), and SMG$C_SPEC_GRAPHICS.
87 – SMG$PUT_PASTEBOARD
The Output Pasteboard Using Routine routine accesses the contents
of a pasteboard.
Format
SMG$PUT_PASTEBOARD pasteboard-id ,action-routine
[,user-argument] [,flags]
87.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
87.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Pasteboard identifier. The pasteboard-id argument is the address
of an unsigned longword containing the pasteboard identifier.
action-routine
OpenVMS usage:procedure
type: procedure value
access: read only
mechanism: by value
Pasteboard routine to be called. The action-routine argument
is the address of the routine's procedure value. Because SMG$
cannot determine the resulting type of device, device-independent
characters (plus sign [+], vertical bar [|]) are used to draw
lines.
The action-routine accepts two arguments:
o A pointer to a string descriptor describing the line in the
pasteboard.
o The user argument, or 0, passed by value.
The action routine should return a success status (low bit set)
as a return value, otherwise SMG$PUT_PASTEBOARD will terminate,
and the status value will be returned as the return value for
SMG$PUT_PASTEBOARD.
user-argument
OpenVMS usage:user_arg
type: longword (unsigned)
access: read only
mechanism: by value
The argument you supply to the action-routine. The user-argument
argument is an unsigned longword that contains the value to be
passed to the action routine. If user-argument is omitted, a 0
will be passed as the user argument.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies whether a form feed is passed
to the action routine. The flags argument is the address of an
unsigned longword that contains the flag. Valid values for flags
are as follows:
0 No form-feed line is sent.
SMG$M_FORM_FEED The first line passed to the action routine is
a form feed.
88 – SMG$PUT_STATUS_LINE
The Output Line of Text to Hardware Status Line routine outputs a
line of text to the hardware status line.
Format
SMG$PUT_STATUS_LINE pasteboard-id ,text
88.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
88.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard containing the hardware status line.
The pasteboard-id argument is the address of an unsigned longword
that contains the pasteboard identifier.
text
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
The characters to be written to the hardware status line. The
text argument is the address of a descriptor pointing to the
text.
89 – SMG$READ_COMPOSED_LINE
The Read Composed Line routine reads a line of input composed of
normal keystrokes and equivalence strings.
Format
SMG$READ_COMPOSED_LINE keyboard-id [,key-table-id]
,resultant-string [,prompt-string]
[,resultant-length] [,display-id]
[,flags] [,initial-string]
[,timeout] [,rendition-set]
[,rendition-complement]
[,word-terminator-code]
89.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
89.2 – Arguments
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual keyboard from which input is to be read.
The keyboard-id argument is the address of an unsigned longword
that contains the keyboard identifier.
The keyboard identifier is returned by SMG$CREATE_VIRTUAL_
KEYBOARD.
key-table-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the key definition table to be used for translating
keystrokes. The key-table-id argument is the address of an
unsigned longword that contains the key definition table
identifier.
The key definition table identifier is returned by SMG$CREATE_
KEY_TABLE.
resultant-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
String into which SMG$READ_COMPOSED_LINE writes the complete
composed line. The resultant-string argument is the address of a
descriptor pointing to the string in which the composed line is
written.
prompt-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String used to prompt for the read operation. The prompt-string
argument is the address of a descriptor pointing to the prompt
string.
resultant-length
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Receives the number of characters read or the maximum length
of resultant-string, whichever is less. The resultant-length
argument is the address of an unsigned longword into which
SMG$READ_COMPOSED_LINE writes the number of characters read.
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier. The display-id argument is the address of
an unsigned longword that contains the display identifier.
This argument is optional only if you are not using the Screen
Management Facility's output routines.
If you are using the Screen Management Facility input and output
routines, this argument specifies the virtual display in which
the input is to occur. The virtual display specified must be
pasted to the same pasteboard as specified by keyboard-id and
must not be occluded. You cannot accept input from an occluded
area of the virtual display.
In the case of multiple virtual displays, each virtual display
has an associated virtual cursor position. At the same time,
there is a single physical cursor position corresponding to
the current location of the physical cursor. If the display-id
argument is specified, the read begins at the current virtual
cursor position in the specified virtual display. If the display
identifier is omitted, the read begins in the current physical
cursor position. The length of the prompt-string plus the key
entered is limited to the number of visible columns in the
display.
NOTE
This virtual display must be pasted in column 1 and may
not have any other virtual displays to its right. This
restriction is necessary because otherwise any occurrence
of Ctrl/R or Ctrl/U would blank out the entire line,
including any output pasted to the right. To circumvent
this restriction, you can use SMG$REPAINT_LINE whenever a
Ctrl/R or Ctrl/U is encountered.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies enabled keys. The flags argument
is the address of an unsigned longword that contains the flag.
Valid values for flags are as follows:
0 Line editing is enabled and function keys (F6
to F14) cannot be used.
SMG$M_FUNC_KEYS Function keys (F6 to F14) may be used and line
editing is disabled.
SMG$M_NOKEEP Lines entered in the recall buffer are not
saved.
SMG$M_NORECALL Line recall is disabled for this I/O only.
Because the OpenVMS terminal driver uses the function keys (F6 to
F14) for line editing on some terminals, you cannot have function
keys and line editing enabled at the same time.
initial-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Optional string that contains the initial characters of the
field. The initial-string argument is the address of a descriptor
pointing to the string. The string is written to the display in
the input area, as if it had been entered from the keyboard. It
may be edited in the usual way (provided that the SMG$M_FUNC_KEYS
flag is not set).
timeout
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional timeout count. The timeout argument is the address of
a signed longword containing the timeout count. If the timeout
argument is specified, all characters entered before the timeout
are returned in the buffer. If the timeout argument is omitted,
characters are returned in the buffer until a terminator is
encountered.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can
be specified with the rendition-set argument can be complemented
with the rendition-complement argument. The display-id argument
must be specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
word-terminator-code
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Key terminator code. The word-terminator-code argument is an
unsigned word into which is written a code indicating what
character or key terminated the read. Key terminator codes are
of the form SMG$K_TRM_keyname.
90 – SMG$READ_FROM_DISPLAY
The Read Text from Display routine reads a line of text from a
virtual display.
Format
SMG$READ_FROM_DISPLAY display-id ,resultant-string
[,terminator-string] [,start-row]
[,rendition-string]
90.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
90.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display from which text is read. The
display-id argument is the address of an unsigned longword that
contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
resultant-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
String into which SMG$READ_FROM_DISPLAY writes the information
read from the virtual display. The resultant-string argument is
the address of a descriptor pointing to the string into which the
string is written.
terminator-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String containing a terminator or terminators that end the
backward search, thus determining the starting position of
the returned string. The terminator-string argument is the
address of a descriptor pointing to the string of terminators.
If terminator-string is omitted, no back searching is performed;
the returned string starts with the character at the current
cursor position.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
The start-row argument is the address of a signed longword that
contains the row of the virtual display to read from. This is an
optional argument.
rendition-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
Optional bit mask string that controls the video attributes.
The rendition-string argument is the address of a descriptor
pointing to the bit mask string. Each attribute set causes the
corresponding attribute to be set for the corresponding byte in
the text string in the display. The following attributes can be
specified for each byte using the rendition-string argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_ Specifies invisible characters; that is, the
INVISIBLE characters exist in the virtual display but do
not appear on the pasteboard.
91 – SMG$READ_KEYSTROKE
The Read a Single Character routine reads a keystroke and returns
that keystroke's terminator code.
Format
SMG$READ_KEYSTROKE keyboard-id ,word-terminator-code
[,prompt-string] [,timeout] [,display-id]
[,rendition-set] [,rendition-complement]
91.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
91.2 – Arguments
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Keyboard identifier. The keyboard-id argument is an unsigned
longword containing the identifier of the virtual keyboard from
which to read.
You can create a virtual keyboard by calling the SMG$CREATE_
VIRTUAL_KEYBOARD routine.
word-terminator-code
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Key terminator code. The word-terminator-code argument is an
unsigned word into which is written a code indicating what
character or key terminated the read. Key terminator codes are
of the form SMG$K_TRM_keyname.
prompt-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Prompt string. The prompt-string argument is an optional string
used as the prompt for the read operation.
timeout
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Timeout count. The timeout argument is optional. If specified,
any character typed before the timeout is returned in the buffer.
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier. The optional display-id argument is the
address of an unsigned longword that contains the identifier
of the virtual display in which the read is to be performed.
If the optional prompt-string argument is specified while there
are multiple virtual displays pasted, the display-id argument is
required to determine in which virtual display the prompt string
will be written. If the prompt-string argument is not specified,
do not specify the display-id argument.
In the case of multiple virtual displays, each virtual display
has an associated virtual cursor position. At the same time,
there is a single physical cursor position corresponding to
the current location of the physical cursor. If the display-id
argument is specified, the read begins at the current virtual
cursor position in the specified virtual display. If display-
id is omitted, the read begins in the current physical cursor
position. Note that the length of the prompt-string plus the
key entered is limited to the number of visible columns in the
display.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can
be specified with the rendition-set argument can be complemented
with the rendition-complement argument. The display-id argument
must be specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
92 – SMG$READ_LOCATOR
The Read Locator Information routine reads information from a
DECwindows workstation terminal's locator device (such as a mouse
or tablet).
Format
SMG$READ_LOCATOR keyboard-id ,row-number ,column-number
,word-terminator-code [,timeout]
[,parse-routine]
92.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
92.2 – Arguments
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Keyboard identifier. The keyboard-id argument is the address of
an unsigned longword containing the identifier of the desired
virtual keyboard.
You can create a virtual keyboard by calling the SMG$CREATE_
VIRTUAL_KEYBOARD routine.
row-number
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Row number to which the locator is pointing. The row-number
argument is the address of an unsigned word that contains the row
number of the virtual display at which the locaor is pointing.
column-number
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Column number to which the locator is pointing. The column-number
argument is the address of an unsigned word that contains the
column number of the virtual display at which the read is to be
performed.
word-terminator-code
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Locator terminator code. The word-terminator-code argument is
the address of an unsigned word into which is written a code
indicating what locator button terminated the read. Locator
terminator codes are of the form SMG$K_TRM_keyname.
timeout
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Timeout count. The optional timeout argument is the address of a
signed longword that contains a number of seconds. If specified,
any character typed before the timeout is returned in the buffer.
parse-routine
OpenVMS usage:longword_unsigned
type: longword (signed)
access: read only
mechanism: by reference
Address of a user-supplied parse routine that is called to parse
the locator input. The optional parse-routine argument is the
address of an unsigned longword that contains the parse routine.
If this argument is not specified, ANSI locator input is assumed.
93 – SMG$READ_STRING
The Read String routine reads a string from a virtual keyboard.
Format
SMG$READ_STRING keyboard-id ,resultant-string [,prompt-string]
[,maximum-length] [,modifiers] [,timeout]
[,terminator-set] [,resultant-length]
[,word-terminator-code] [,display-id]
[,initial-string] [,rendition-set]
[,rendition-complement] [,terminator-string]
93.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
93.2 – Arguments
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual keyboard from which input is to be read.
The keyboard-id argument is the address of an unsigned longword
that contains the keyboard identifier.
The keyboard identifier is returned by SMG$CREATE_VIRTUAL_
KEYBOARD.
resultant-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
String into which the input line is written. The resultant-string
argument is the address of a descriptor pointing to the string
into which the text is written.
prompt-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String used to prompt for the read operation. The prompt-string
argument is the address of a descriptor pointing to the prompt
string.
maximum-length
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the maximum number of characters to be read. The
maximum-length argument is the address of a signed longword that
contains the maximum number of characters to be read. The maximum
valid value for this argument is 512. If omitted, 512 is the
default.
modifiers
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies optional behavior. The modifiers
argument is the address of an unsigned longword that contains the
flag.
Valid values for modifiers are as follows:
TRM$M_TM_CVTLOW Converts lowercase characters to uppercase
characters.
TRM$M_TM_NOECHO Characters entered are not echoed on the
screen.
TRM$M_TM_NOEDIT Advanced editing is disabled for this read
operation.
TRM$M_TM_NORECALL Line recall is disabled.
TRM$M_TM_PURGE Type-ahead buffer is purged before read is
begun.
TRM$M_TM_ Termination character, if any, is not
TRMNOECHO displayed.
The TRM$ symbols are defined by the $TRMDEF macro/module in
system symbol libraries supplied by Compaq. See the terminal
driver section of the OpenVMS I/O User's Reference Manual for
more information on modifiers for read operations.
timeout
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of seconds allowed between the time the
prompt is issued and the completion of the input operation.
The timeout argument is the address of a signed longword that
contains the timeout value.
If timeout is specified, all characters typed before the
expiration time or until a terminate key is entered are returned
in resultant-string. If omitted, the input operation remains
active until a terminator is typed.
terminator-set
OpenVMS usage:unspecified
type: unspecified
access: read only
mechanism: by descriptor, fixed length
Either a mask that specifies which characters are to be treated
as terminators (short form) or a descriptor pointing to such a
mask (long form). The terminator-set argument is the address of a
descriptor pointing to the mask.
If you want to use terminators with ASCII values in the range 0
to 31, use the short form, which consists of two longwords. The
first longword is zero, and the second longword is a terminator
character bit mask. You create this mask by setting the bit that
corresponds to the ASCII value of the desired terminator. For
example, to specify that Ctrl/A (ASCII value 1) is a terminator,
you set bit 1 in the terminator-set mask.
To use terminators with ASCII values outside the range 0 to 31,
use the long form. First create a descriptor of this form:
31 16 15 0
----------------------------------------------------------------
| | |
| (not used) | mask size in bytes |
| | |
----------------------------------------------------------------
| |
| address of mask |
| |
----------------------------------------------------------------
The mask itself has the same format as that of the short form;
however, the long form allows the use of a more comprehensive set
of terminator characters. For example, a mask size of 16 bytes
allows any 7-bit ASCII character to be set as a terminator, while
a mask size of 32 bytes allows any 8-bit character to be set as a
terminator. Any mask size between 1 and 32 bytes is acceptable.
If the terminator mask is all zeros, there are no specified
terminators. In that case, the read terminates when the number
of characters specified in maximum-length has been transferred or
when timeout is reached.
If the terminator-set argument is omitted, the set of terminators
is the OpenVMS default terminator set. For more information, see
the OpenVMS I/O User's Reference Manual.
resultant-length
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Receives the number of characters read or the maximum size
of resultant-string, whichever is less. The resultant-length
argument is the address of an unsigned word into which is written
the number of characters read or the maximum size.
word-terminator-code
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Key terminator code. The word-terminator-code argument is an
unsigned word into which is written a code indicating what
character or key terminated the read. Key terminator codes are
of the form SMG$K_TRM_keyname.
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier. The display-id argument is the address of
an unsigned longword that contains the display identifier.
This argument is optional only if you are not using the Screen
Management Facility's output routines.
If you are using the Screen Management Facility input and output
routines, this argument specifies the virtual display in which
the input is to occur. The virtual display specified must be
pasted to the same pasteboard as specified by keyboard-id and
must not be occluded. You cannot accept input from an occluded
area of the virtual display.
In the case of multiple virtual displays, each virtual display
has an associated virtual cursor position. At the same time,
there is a single physical cursor position corresponding to
the current location of the physical cursor. If the display-id
argument is specified, the read begins at the current virtual
cursor position in the specified virtual display. If display-
id is omitted, the read begins in the current physical cursor
position. Note that the length of the prompt-string plus the
key entered is limited to the number of visible columns in the
display.
NOTE
This virtual display must be pasted in column 1 and may
not have any other virtual displays to its right. This
restriction applies because otherwise the occurrence of a
Ctrl/R or Ctrl/U would cause the entire line to be blanked,
including any output to the right. To circumvent this
restriction, you may use SMG$REPAINT_LINE to repaint the
line when a Ctrl/R or Ctrl/U is detected.
initial-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Initial character string. The initial-string argument is the
address of a descriptor pointing to the optional string that
contains the initial characters of the field. The string is
written to the display in the input area, as if it had been
entered from the keyboard. It may be edited in the usual
way (provided that TRM$M_TM_NOEDIT is not set). It must be
shorter than maximum-length, otherwise SMG$READ_STRING returns
immediately without accepting any keyboard input.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity (bolded).
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite default rendition of the
virtual display.
SMG$M_UNDERLINE Displays underlined characters.
SMG$M_INVISIBLE Specifies invisible characters; that is, the
characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can be
specified with the rendition-set argument can be complemented
with rendition-complement. The display-id argument must be
specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement let
the user control the attributes of the virtual display in which
the read is done. The rendition-set argument sets certain virtual
display attributes, while rendition-complement complements
these attributes. If the same bit is specified in both the
rendition-set and rendition-complement parameters, rendition-
set is evaluated first, followed by rendition-complement.
By using these two parameters together, the user can control
each virtual display attribute in a single procedure call.
On a single-attribute basis, the user can cause the following
transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of current setting
1 1 Attribute off
terminator-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
Characters that terminate I/O. The optional terminator-string
argument is the address of a descriptor pointing to the character
string containing the terminating characters. The terminator-
string argument returns the actual terminating characters, not
the key that was pressed to terminate the I/O.
94 – SMG$READ_VERIFY
The Read and Verify a String routine reads a sequence of
characters and verifies the sequence.
Format
SMG$READ_VERIFY keyboard-id ,resultant-string ,initial-string
,picture-string ,fill-character
,clear-character [,prompt-string]
[,modifiers] [,timeout] [,placeholder-arg]
[,initial-offset] [,word-terminator-code]
[,display-id] [,alternate-echo-string]
[,alternate-display-id] [,rendition-set]
[,rendition-complement] [,input-length]
94.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
94.2 – Arguments
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Keyboard identifier. The keyboard-id argument is the address of
an unsigned longword containing the identifier of the virtual
keyboard from which to read.
The virtual keyboard is created by calling the SMG$CREATE_
VIRTUAL_KEYBOARD routine.
resultant-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
Output string into which SMG$READ_VERIFY writes the characters
that are read. The resultant-string argument is the address of a
descriptor pointing to this output string.
initial-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Input string that contains the initial characters of the field.
The initial-string argument is the address of a descriptor
pointing to the input string.
picture-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String that contains a picture of what the field is to look
like. The picture-string argument is the address of a descriptor
pointing to the picture string.
For more information on the legal values for the picture string,
see the terminal driver section of the OpenVMS I/O User's
Reference Manual.
fill-character
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Fill character. The fill-character argument is the address of a
descriptor pointing to the string that contains the character to
be used as a fill character in the initial-string argument.
clear-character
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Clear character. The clear-character argument is the address of
a descriptor pointing to the string that contains the character
to be displayed for each occurrence of fill-character in initial-
string.
prompt-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Prompt string. The prompt-string argument is the address of a
descriptor pointing to the string that SMG$READ_VERIFY uses as
the prompt for the read operation. This is an optional argument.
modifiers
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Modifiers. The modifiers argument is a longword bit mask that
specifies optional behavior. The bits defined are the same as
for the $QIO item-list entry TRM$_MODIFIERS. This is an optional
argument.
Valid values for modifiers are as follows:
TRM$M_TM_AUTO_TAB Field is full when last character is entered.
TRM$M_TM_CVTLOW Converts lowercase characters to uppercase
characters.
TRM$M_TM_NOECHO Characters entered are not echoed on the
screen.
TRM$M_TM_NOEDIT Advanced editing is disabled for this read
operation.
TRM$M_TM_NORECALL Line recall is disabled.
TRM$M_TM_PURGE Type-ahead buffer is purged before read is
begun.
TRM$M_TM_R_JUST Input is right justified.
TRM$M_TM_ Termination character, if any, is not
TRMNOECHO displayed.
The TRM$ symbols are defined by the $TRMDEF macro/module in
system symbol libraries supplied by Compaq. See the terminal
driver section of the OpenVMS I/O User's Reference Manual for
more information on modifiers for read operations.
timeout
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Timeout count. The timeout argument is the address of a signed
longword that contains the timeout value. The timeout argument is
optional. If timeout is specified, all characters typed in before
the timeout or before a terminator is entered are returned in
the buffer. If timeout is omitted, characters are returned in the
buffer until a terminator is seen.
placeholder-arg
OpenVMS usage:unspecified
type: unspecified
access: read only
mechanism: unspecified
Placeholder argument. The OpenVMS terminal driver ignores this
argument when performing a read-verify.
initial-offset
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Input string offset. The initial-offset argument is the address
of a signed longword that contains the number of characters (from
the initial-string argument) to output after the prompt before
waiting for input.
word-terminator-code
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Key terminator code. The word-terminator-code argument is an
unsigned word into which SMG$READ_VERIFY writes a code indicating
what character or key terminated the read. Key terminator codes
are of the form SMG$K_TRM_keyname.
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier. The optional display-id argument is the
address of an unsigned longword that contains the identifier
of the virtual display in which the read is to be performed.
If display-id is specified, SMG$READ_VERIFY begins the read at
the current virtual cursor position in that virtual display. If
omitted, the read begins in the current physical cursor position.
You cannot accept input from an occluded area of the virtual
display.
In the case of multiple virtual displays, each virtual display
has an associated virtual cursor position. At the same time,
there is a single physical cursor position corresponding to
the current location of the physical cursor. If the display-id
argument is specified, the read begins at the current virtual
cursor position in the specified virtual display. If omitted,
the read begins in the current physical cursor position. Note
that the length of the prompt-string, the initial-offset, and the
string entered is limited to the number of visible columns in the
display.
alternate-echo-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Alternate echo string. The alternate-echo-string argument is a
string that is printed after the first character is typed during
the read operation. This is an optional argument.
alternate-display-id
OpenVMS usage:identifier
type: longword (signed)
access: read only
mechanism: by reference
Alternate display identifier. The alternate-display-id is a
signed longword containing the identifier of the virtual display
in which the alternate-echo-string argument is to be printed.
This is an optional argument. If specified, the output begins
at the current virtual cursor position in that virtual display.
If omitted, the value of the display-id argument is used as the
default. If display-id is not specified, the output begins in the
current physical cursor position.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_UNDERLINE Displays underlined characters.
SMG$M_INVISIBLE Specifies invisible characters; that is, the
characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to be
complemented in the display. All attributes that can be specified
with the rendition-set argument can be complemented with the
rendition-complement argument. The display-id argument must be
specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement let
the user control the attributes of the virtual display in which
the read is done. The rendition-set argument sets certain virtual
display attributes, while rendition-complement complements
these attributes. If the same bit is specified in both the
rendition-set and rendition-complement parameters, rendition-
set is evaluated first, followed by rendition-complement. By
using these two parameters together, the user can control each
virtual display attribute in a single procedure call. On a
single-attribute basis, the user can cause the transformations
shown in the following table.
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
input-length
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Number of characters entered by the user. The input-length
argument is the address of an unsigned word containing this
number.
95 – SMG$REMOVE_LINE
The Remove a Line from a Virtual Display routine removes a
line from a specified virtual display that was drawn with the
SMG$DRAW_LINE or SMG$DRAW_RECTANGLE routines.
Format
SMG$REMOVE_LINE display-id ,start-row ,start-column ,end-row
,end-column
95.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
95.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display from which the line is to be
removed. The display-id argument is the address of an unsigned
longword that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row at which to begin removing the line. The start-
row argument is the address of a signed longword that contains
the row number.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column at which to begin removing the line. The
start-column argument is the address of a signed longword that
contains the column number.
end-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row at which the line to be removed ends. The end-
row argument is the address of a signed longword that contains
the row number.
end-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column at which the line to be removed ends. The
end-column argument is the address of a signed longword that
contains the column number.
96 – SMG$REPAINT_LINE
The Repaint One or More Lines on the Current Pasteboard routine
repaints a series of lines on the current pasteboard.
Format
SMG$REPAINT_LINE pasteboard-id ,start-row [,number-of-lines]
96.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
96.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Pasteboard identifier. The pasteboard-id argument is the address
of the pasteboard associated with the physical screen to be
repainted.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Starting row number. The start-row argument is the address of the
pasteboard row number to start repainting.
number-of-lines
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Number of contiguous lines to repaint. The number-of-lines
argument is the address of a signed longword containing the
number of lines. This argument is optional. If not specified,
the default is 1.
97 – SMG$REPAINT_SCREEN
The Repaint Current Pasteboard routine repaints the specified
pasteboard after non-SMG$ I/O has occurred.
Format
SMG$REPAINT_SCREEN pasteboard-id
97.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
97.2 – Argument
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard to be repainted. The pasteboard-id
argument is the address of an unsigned longword that contains
the pasteboard identifier.
98 – SMG$REPASTE_VIRTUAL_DISPLAY
The Repaste Virtual Display routine moves a virtual display
to a new position on the pasteboard. The pasting order is not
preserved.
Format
SMG$REPASTE_VIRTUAL_DISPLAY display-id ,pasteboard-id
,pasteboard-row ,pasteboard-column
[,top-display-id]
98.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
98.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to be repasted. The display-id
argument is the address of an unsigned longword that contains the
display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard on which the display is repasted. The
pasteboard-id argument is the address of an unsigned longword
that contains the pasteboard identifier.
pasteboard-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the pasteboard row that is to contain row 1 of the
specified virtual display. The pasteboard-row argument is the
address of a signed longword that contains the pasteboard row.
pasteboard-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the pasteboard column that is to contain column 1 of
the specified virtual display. The pasteboard-column argument
is the address of a signed longword that contains the pasteboard
column.
top-display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Optional identifier of the virtual display under which display-
id will be pasted. The top-display-id argument is the address of
an unsigned longword containing the identifier of this virtual
display. Note that the virtual display specified by top-display-
id must already be pasted.
99 – SMG$REPLACE_INPUT_LINE
The Replace Input Line routine replaces the specified lines in
the recall buffer with the specified string.
Format
SMG$REPLACE_INPUT_LINE keyboard-id [,replace-string]
[,line-count] [,flags]
99.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
99.2 – Arguments
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Keyboard identifier. The keyboard-id argument is the address of
an unsigned longword containing the identifier of the virtual
keyboard from which to read.
You create a virtual keyboard by calling the SMG$CREATE_VIRTUAL_
KEYBOARD routine.
replace-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String that contains the line to be entered into the recall
buffer. The replace-string argument is the address of a
descriptor pointing to this string. The default is a null string,
which removes the last line entered.
line-count
OpenVMS usage:byte_unsigned
type: byte (unsigned)
access: read only
mechanism: by reference
Number of lines to be replaced. The line-count argument is the
address of an unsigned byte containing the number of lines to
be replaced with replace-string. The default value for the line-
count argument is 1 (the last line entered).
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies optional behavior. The flags argument is the address of
an unsigned longword that contains the flag. There is one valid
value:
SMG$M_KEEP_CONTENTS The string specified by replace-string
replaces the existing string specified by
line-count. By using this flag in a loop,
the line recall buffer can be preloaded
with information by the application.
100 – SMG$RESTORE_PHYSICAL_SCREEN
The Restore Physical Pasteboard routine rewrites the pasteboard
image as it was at the time the SMG$SAVE_PHYSICAL_SCREEN routine
was called.
Format
SMG$RESTORE_PHYSICAL_SCREEN pasteboard-id ,display-id
100.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
100.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard to be restored. The pasteboard-id
argument is the address of an unsigned longword that contains
the pasteboard identifier.
The pasteboard identifier is returned by the SMG$CREATE_
PASTEBOARD routine.
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display created by the SMG$SAVE_PHYSICAL_
SCREEN routine. The display-id argument is the address of an
unsigned longword that contains this display identifier.
101 – SMG$RETURN_CURSOR_POS
The Return Cursor Position routine returns the current virtual
cursor position in a specified virtual display.
Format
SMG$RETURN_CURSOR_POS display-id ,start-row ,start-column
101.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
101.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display whose current virtual cursor
position you are requesting. The display-id argument is the
address of an unsigned longword that contains the display
identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Receives the virtual cursor's current row position within the
specified virtual display. The start-row argument is the address
of a signed longword into which is written the current row
position.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: write only
mechanism: by reference
Receives the virtual cursor's current column position within
the specified virtual display. The start-column argument is the
address of a signed longword into which is written the current
column position.
102 – SMG$RETURN_INPUT_LINE
The Return Input Line routine returns to the caller the requested
line from the recall buffer. This line is retrieved either
by matching it with a specified string or by specifying the
appropriate line number.
Format
SMG$RETURN_INPUT_LINE keyboard-id ,resultant-string
[,match-string]
[,byte-integer-line-number]
[,resultant-length]
102.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
102.2 – Arguments
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Keyboard identifier. The keyboard-id argument is the address of
an unsigned longword containing the identifier of the virtual
keyboard from which to read.
The virtual keyboard is created by calling the SMG$CREATE_
VIRTUAL_KEYBOARD routine.
resultant-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
String into which is written the complete recalled line. The
resultant-string argument is the address of a descriptor pointing
to this string.
match-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Match string to be used when searching for the line to be
recalled. The optional match-string argument is the address of
a descriptor pointing to this match string. The search begins
with the last line typed.
byte-integer-line-number
OpenVMS usage:byte_unsigned
type: byte (unsigned)
access: read only
mechanism: by reference
Line number to be used when searching for the line to be
recalled. The optional byte-integer-line-number argument is the
address of an unsigned byte containing the number of the line to
be recalled. The last line typed is line number 1.
resultant-length
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Length of the resultant-string string. The optional resultant-
length argument is the address of an unsigned word containing
either the number of characters read or the maximum length of
resultant-string, whichever is less.
103 – SMG$RING_BELL
The Ring the Terminal Bell or Buzzer routine sounds the terminal
bell or buzzer.
Format
SMG$RING_BELL display-id [,number-of-times]
103.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
103.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display for which the bell or buzzer
sounds. The display-id argument is the address of an unsigned
longword that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
number-of-times
OpenVMS usage:longword_signed
type: longword integer (signed)
access: read only
mechanism: by reference
Specifies the number of times the bell or buzzer is sounded.
The number-of-times argument is the address of a signed longword
integer that contains the number of times the bell or buzzer is
sounded. If number-of-times is omitted, 1 is used.
104 – SMG$SAVE_PHYSICAL_SCREEN
The Save Physical Screen routine saves the contents of the
pasteboard so that a later call to SMG$RESTORE_PHYSICAL_SCREEN
can restore it.
Format
SMG$SAVE_PHYSICAL_SCREEN pasteboard-id ,display-id
[,desired-start-row]
[,desired-end-row]
104.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
104.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard whose contents are to be saved. The
pasteboard-id argument is the address of an unsigned longword
that contains the pasteboard identifier.
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: write only
mechanism: by reference
Receives the display identifier of the display created to contain
the contents of the specified pasteboard. The display-id argument
is the address of an unsigned longword into which the display
identifier is written.
The display identifier must be passed to the SMG$RESTORE_
PHYSICAL_SCREEN routine to restore the saved information.
desired-start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the first row to be saved. The desired-start-row
argument is the address of a signed longword that contains
the row number. If desired-start-row is omitted, row 1 of the
pasteboard is used.
desired-end-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the last row to be saved. The desired-end-row argument
is the address of a signed longword that contains the row number.
If desired-end-row is omitted, the last row of the pasteboard is
used.
105 – SMG$SAVE_VIRTUAL_DISPLAY
The Save the Virtual Display to a File routine saves the contents
of a virtual display and stores it in a file.
Format
SMG$SAVE_VIRTUAL_DISPLAY display-id [,filespec]
105.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
105.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to be saved. The display-id
argument is the address of an unsigned longword that contains
the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
filespec
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String containing the file specification of the file in which
the specified virtual display is saved. The filespec argument
is the address of a descriptor pointing to the character string
containing the file specification.
A new file is created each time this routine is called.
If filespec is omitted, the default file specification is
SMGDISPLY.DAT.
106 – SMG$SCROLL_DISPLAY_AREA
The Scroll Display Area routine scrolls a rectangular region of a
virtual display.
Format
SMG$SCROLL_DISPLAY_AREA display-id [,start-row]
[,start-column] [,height]
[,width] [,direction] [,count]
106.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
106.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display in which scrolling takes place. The
display-id argument is the address of an unsigned longword that
contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the first row of the scrolling region. The start-row
argument is the address of a signed longword that contains the
starting row.
If start-row is omitted, row 1 of the specified virtual display
is used.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the first column of the scrolling region. The start-
column argument is the address of a signed longword that contains
the starting column.
If omitted, column 1 of the specified virtual display is used.
height
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of rows in the scrolling region. The height
argument is the address of a signed longword that contains the
number of rows.
If omitted, this value defaults to either the height of the
virtual scrolling region (if one has been explicitly set with
SMG$SET_DISPLAY_SCROLL_REGION) or the height of the specified
virtual display.
When scrolling a portion of a virtual display that contains
double-height, double-width (highwide) characters, it is
recommended that you scroll the display an even number of times.
width
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of columns in the scrolling region. The
width argument is the address of a signed longword that contains
the number of columns.
If omitted, this value defaults to the width of the specified
virtual display.
direction
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the direction to scroll. The direction argument is the
address of a longword bit mask that contains the direction code.
Valid values are SMG$M_UP, SMG$M_DOWN, SMG$M_RIGHT, and SMG$M_
LEFT. SMG$M_UP is the default.
count
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of lines or columns to scroll. The count
argument is the address of a signed longword that contains the
number of units (lines or columns) to scroll. If omitted, one
unit is scrolled.
107 – SMG$SCROLL_VIEWPORT
The Scroll a Display Under a Viewport routine scrolls a virtual
display under its associated viewport.
Format
SMG$SCROLL_VIEWPORT display-id [,direction] [,count]
107.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
107.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier of the virtual display to be scrolled. The
display-id argument is the address of an unsigned longword
containing this identifier.
direction
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional direction specifier. The direction argument is the
address of a longword bit mask that contains the direction code
specifying the scrolling direction. The optional count argument
can be used to specify the number of lines to scroll in the
specified direction. Valid values for direction are as follows:
SMG$M_UP Scroll count lines upward.
SMG$M_DOWN Scroll count lines downward.
SMG$M_RIGHT Scroll count columns to the right.
SMG$M_LEFT Scroll count columns to the left.
SMG$M_UP is the default.
count
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional number of rows or columns to be scrolled. The default is
1.
108 – SMG$SELECT_FROM_MENU
The Make a Selection from the Menu routine lets you move between
the menu choices using the arrow keys and lets you make a
selection by pressing the Return key.
Format
SMG$SELECT_FROM_MENU keyboard-id ,display-id
,selected-choice-number
[,default-choice-number] [,flags]
[,help-library] [,timeout]
[,word-terminator-code]
[,selected-choice-string]
[,rendition-set] [,rendition-complement]
108.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
108.2 – Arguments
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual keyboard from which the terminal user's
responses are read. The keyboard-id argument is the address of an
unsigned longword containing this identifier.
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the virtual display in which the choices are
displayed. The display-id argument is the address of an unsigned
longword containing this display identifier. This virtual display
must be pasted to a pasteboard and cannot be batched or occluded.
selected-choice-number
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Identification number of the menu item selected. The selected-
choice-number argument is the address of an unsigned word that
receives this number. The selected-choice-number corresponds to
the index of the menu item in the static string array specified
in SMG$CREATE_MENU.
default-choice-number
OpenVMS usage:word_unsigned
type: word (unsigned)
access: read only
mechanism: by reference
Optional identification number of the default menu item. The
default-choice-number argument is the address of an unsigned word
that contains the number of the default menu item. The default-
choice-number corresponds to the index of the default menu item
in the static string array specified in SMG$CREATE_MENU. If
omitted, the default choice will be the last menu item already
selected, or the first item in the menu if no selections have yet
been made.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask indicating behavior when a selection is
made. The flags argument is the address of an unsigned longword
containing the flag. Valid values are as follows:
SMG$M_RETURN_ Returns control to the user when any key other
IMMED than an arrow key is entered.
SMG$M_REMOVE_ Causes SMG$SELECT_FROM_MENU to allow each menu
ITEM item to be selected only once.
help-library
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Optional help library to use if the PF2/Help key is pressed.
The help-library argument is the address of a descriptor
pointing to this help library name. Note that this argument is
ignored if flags specifies SMG$M_RETURN_IMMED. The default is
SYS$HELP:HELPLIB.HLB.
timeout
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Optional timeout value. The timeout argument is the address of a
signed longword that specifies the number of seconds to wait for
a selection to be made.
word-terminator-code
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Optional unsigned word that receives the code indicating which
key terminated the read. The word-terminator-code argument is the
address of an unsigned word that receives this terminating key
code.
selected-choice-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
Optional string that receives the text of the menu item selected.
The selected-choice-string is the address of a descriptor
pointing to this string.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity.
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite of the default rendition of
the virtual display.
SMG$M_ Displays underlined characters.
UNDERLINE
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to be
complemented in the display. All attributes that can be specified
with the rendition-set argument can be complemented with the
rendition-complement argument. The display-id argument must be
specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement
let the user control the attributes of the virtual display. The
rendition-set argument sets certain virtual display attributes,
while rendition-complement complements these attributes. If the
same bit is specified in both the rendition-set and rendition-
complement parameters, rendition-set is evaluated first, followed
by rendition-complement. By using these two parameters together,
the user can control each virtual display attribute in a single
procedure call. On a single-attribute basis, the user can cause
the following transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of default setting
1 1 Attribute off
109 – SMG$SET_BROADCAST_TRAPPING
The Enable Broadcast Trapping routine enables the trapping of
broadcast messages.
Format
SMG$SET_BROADCAST_TRAPPING pasteboard-id [,AST-routine]
[,AST-argument]
109.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
109.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard for which broadcast messages are to be
trapped. The pasteboard-id argument is the address of an unsigned
longword that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
AST-routine
OpenVMS usage:ast_procedure
type: procedure value
access: read only
mechanism: by value
The address of an AST routine to be called when a message is
received at the pasteboard. The AST-routine argument is the
address of the routine's procedure value.
When the AST-routine argument is either omitted or is given a
value of 0, the BROADCAST mode is set to synchronize. In this
mode, you must periodically call SMG$GET_BROADCAST_MESSAGE to see
if any broadcast messages have arrived.
The AST routine is called with five parameters: AST-argument, R0,
R1, PC, and PSL (on VAX systems) or PS (on Alpha systems).
AST-argument
OpenVMS usage:user_arg
type: longword (unsigned)
access: read only
mechanism: by value
A value to be passed to the AST routine. The AST-argument is an
unsigned longword that contains the value to be passed to the AST
routine.
110 – SMG$SET_CURSOR_ABS
The Set Absolute Cursor Position routine moves the virtual cursor
to the specified position in a virtual display.
Format
SMG$SET_CURSOR_ABS display-id [,start-row] [,start-column]
110.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
110.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display in which to set the virtual cursor
position. The display-id argument is the address of an unsigned
longword that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row position to which the virtual cursor moves.
The start-row argument is the address of a signed longword that
contains the row number. If omitted, the cursor remains at the
current row.
start-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column position to which the virtual cursor moves.
The start-column argument is the address of a signed longword
that contains the column number. If omitted, the virtual cursor
remains at the current column.
111 – SMG$SET_CURSOR_MODE
The Set the Cursor Mode routine turns the physical cursor on or
off and selects jump or smooth scrolling.
Format
SMG$SET_CURSOR_MODE pasteboard-id ,flags
111.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
111.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Pasteboard identifier. The pasteboard-id argument is the address
of an unsigned longword that contains the pasteboard identifier.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies scrolling and cursor attributes.
The flags argument is the address of an unsigned longword that
contains the flag. The flags argument accepts the following
values:
SMG$M_CURSOR_OFF Clears physical cursor.
SMG$M_CURSOR_ON Displays physical cursor.
SMG$M_SCROLL_JUMP Jump scrolls.
SMG$M_SCROLL_ Smooth scrolls.
SMOOTH
112 – SMG$SET_CURSOR_REL
The Move Cursor Relative to Current Position routine moves the
virtual cursor the specified number of rows and columns from the
current virtual cursor position in a virtual display.
Format
SMG$SET_CURSOR_REL display-id [,delta-row] [,delta-column]
112.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
112.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display in which to move the virtual
cursor. The display-id argument is the address of an unsigned
longword that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
delta-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of rows to move the virtual cursor. The
delta-row argument is the address of a signed longword that
contains the number of rows to move. If omitted, the virtual
cursor remains at the current row position. If delta-row is
positive, the virtual cursor moves downward the specified number
of rows. If delta-row is negative, the virtual cursor moves
upward the specified number of rows.
delta-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of columns to move the cursor. The delta-
column argument is the address of a signed longword that contains
the number of columns to move. If omitted, the virtual cursor
remains at the current column position. If delta-column is
positive, the virtual cursor moves the specified number of
columns to the right. If delta-column is negative, the virtual
cursor moves the specified number of columns to the left.
113 – SMG$SET_DEFAULT_STATE
The Set Default State routine sets and/or returns the current
default state for a key table.
Format
SMG$SET_DEFAULT_STATE key-table-id [,new-state] [,old-state]
113.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
113.2 – Arguments
key-table-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the key table in which you are setting or inquiring
about a default state. The key-table-id argument is the address
of an unsigned longword that contains the key table identifier.
The key table identifier is returned by the SMG$CREATE_KEY_TABLE
routine.
new-state
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Specifies the new default state for the entire key table. The
new-state argument is the address of a descriptor pointing to
the new state string. The specified state name is converted to
uppercase and stripped of trailing blanks before use.
old-state
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
Receives the existing default state name of the specified key
definition table. The old-state argument is the address of a
descriptor pointing to the string into which the old state string
is written.
114 – SMG$SET_DISPLAY_SCROLL_REGION
The Create Display Scrolling Region routine creates a virtual
scrolling region in a virtual display.
Format
SMG$SET_DISPLAY_SCROLL_REGION display-id [,start-row]
[,end-row]
114.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
114.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display in which scrolling takes place. The
display-id argument is the address of an unsigned longword that
contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the first line of the virtual scrolling region. The
start-row argument is the address of a signed longword that
contains the starting line number. If omitted, the first line
of the display is used.
end-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the last line of the virtual scrolling region. The end-
row argument is the address of a signed longword that contains
the ending line number. If omitted, the last line of the virtual
display is used.
115 – SMG$SET_KEYPAD_MODE
The Set Keypad Mode routine sets the terminal's numeric keypad to
either numeric or applications mode.
Format
SMG$SET_KEYPAD_MODE keyboard-id ,flags
115.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
115.2 – Arguments
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual keyboard whose mode is to be changed. The
keyboard-id argument is the address of an unsigned longword that
contains the keyboard identifier.
The keyboard identifier is returned by SMG$CREATE_VIRTUAL_
KEYBOARD.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies whether the keypad is to be in
applications or numeric mode. The flags argument is the address
of an unsigned longword that contains the flag. Valid values for
flags are as follows:
0 Keypad is set to numeric mode.
SMG$M_KEYPAD_ Keypad is set to applications mode.
APPLICATION
116 – SMG$SET_OUT_OF_BAND_ASTS
The Set Out-of-Band ASTs routine either enables or disables the
trapping of out-of-band control characters.
Format
SMG$SET_OUT_OF_BAND_ASTS pasteboard-id,control-character-mask
,AST-routine [,AST-argument]
116.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
116.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard for which out-of-band characters are
enabled or disabled. The pasteboard-id argument is the address of
an unsigned longword that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
control-character-mask
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies which control characters are to be the new out-of-band
control characters. The control-character-mask argument is the
address of an unsigned longword that contains the mask. Create
this mask by setting the bit that corresponds to the ASCII value
of the desired character. For example, to specify that Ctrl/C
(ASCII value 3) is an out-of-band control character, set bit 3
(value 8) in the control-character-mask. If no bits are set in
this mask, then no out-of-band ASTs occur. For more information,
see the OpenVMS I/O User's Reference Manual.
AST-routine
OpenVMS usage:ast_procedure
type: procedure value
access: read only
mechanism: by value
The address of an AST routine to be called when an out-of-band
control character is typed at the terminal. The AST-routine
argument is the routine's procedure value.
AST-argument
OpenVMS usage:user_arg
type: longword (unsigned)
access: read only
mechanism: by value
The argument you supply to the AST. AST-argument is an unsigned
longword that contains the value to be passed to the AST routine.
However, the AST routine may also need to determine the out-
of-band character and the pasteboard-id at which it was typed.
Therefore, the Screen Management Facility creates a three-
longword structure to hold this information and passes the
address of this structure as the first argument to the AST
routine. The remaining four arguments are R0, R1, PC, and PSL
(on VAX systems) or PS (on Alpha systems). The Screen Management
Facility stores the argument you supply in this structure.
+---------------------------+ +-------------------------+
| address of data structure |--------->| SMG$L_PBD_ID |
+---------------------------+ +-------------------------+
| R0 | | SMG$L_USER_ARG |
+---------------------------+ +-------------------------+
| R1 | | SMG$L_CHAR |
+---------------------------+ +-------------------------+
| PC |
+---------------------------+
| PSL |
+---------------------------+
The first longword contains the pasteboard-id and has the
symbolic name SMG$L_PBD_ID. The second longword contains the
AST-argument and has the symbolic name SMG$L_USER_ARG. The third
longword contains the ASCII value of the out-of-band character
typed and can be accessed by way of two symbolic names: SMG$B_
CHAR (the low-order byte containing the ASCII value), and SMG$L_
CHAR (the longword containing the ASCII value in the low-order
byte and spaces in the high-order bytes).
117 – SMG$SET_PHYSICAL_CURSOR
The Set Cursor on Physical Screen routine moves the physical
cursor to the specified position on the pasteboard.
Format
SMG$SET_PHYSICAL_CURSOR pasteboard-id ,pasteboard-row
,pasteboard-column
117.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
117.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard whose physical cursor is to move. The
pasteboard-id argument is the address of an unsigned longword
that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
pasteboard-row
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the row to which the physical cursor moves. The
pasteboard-row argument is the address of a signed longword that
contains the row number.
pasteboard-column
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the column to which the physical cursor moves. The
pasteboard-column argument is the address of a signed longword
that contains the column number.
118 – SMG$SET_TERM_CHARACTERISTICS
The Change Terminal Characteristics routine changes or retrieves
the terminal characteristics for a given pasteboard.
Format
SMG$SET_TERM_CHARACTERISTICS pasteboard-id
[,on-characteristics1]
[,on-characteristics2]
[,off-characteristics1]
[,off-characteristics2]
[,old-characteristics1]
[,old-characteristics2]
[,on-characteristics3]
[,off-characteristics3]
[,old-characteristics3]
118.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
118.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard whose characteristics are to be changed
or retrieved. The pasteboard-id argument is the address of an
unsigned longword that contains the pasteboard identifier.
The pasteboard identifier is returned by SMG$CREATE_PASTEBOARD.
on-characteristics1
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Bit mask that specifies the terminal characteristics to be set
from $TTDEF. The on-characteristics1 argument is the address of
an unsigned longword that contains the bit mask.
on-characteristics2
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Bit mask that specifies the terminal characteristics to be set
from $TT2DEF. The on-characteristics2 argument is the address of
an unsigned longword that contains the bit mask.
off-characteristics1
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Bit mask that specifies the terminal characteristics to be reset
from $TTDEF. The off-characteristics1 argument is the address of
an unsigned longword that contains the bit mask.
off-characteristics2
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Bit mask that specifies the terminal characteristics to be reset
from $TT2DEF. The off-characteristics2 argument is the address of
an unsigned longword that contains the bit mask.
old-characteristics1
OpenVMS usage:mask_longword
type: longword (unsigned)
access: write only
mechanism: by reference
Retrieves the current terminal characteristics in the first
group. The old-characteristics1 argument is the address of an
unsigned longword that contains the bit mask.
old-characteristics2
OpenVMS usage:mask_longword
type: longword (unsigned)
access: write only
mechanism: by reference
Retrieves the current terminal characteristics in the second
group. The old-characteristics2 argument is the address of an
unsigned longword that contains the bit mask.
on-characteristics3
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Bit mask that specifies the terminal characteristics to be set
from $TT3DEF. The on-characteristics3 argument is the address of
an unsigned longword that contains the bit mask.
off-characteristics3
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Bit mask that specifies the terminal characteristics to be reset
from $TT3DEF. The off-characteristics3 argument is the address of
an unsigned longword that contains the bit mask.
old-characteristics3
OpenVMS usage:mask_longword
type: longword (unsigned)
access: write only
mechanism: by reference
Retrieves the current terminal characteristics in the third
group. The old-characteristics3 argument is the address of an
unsigned longword that contains the bit mask.
119 – SMG$SNAPSHOT
The Write Snapshot routine writes the current pasteboard buffer
to the file or hardcopy terminal specified by the pasteboard
identifier.
Format
SMG$SNAPSHOT pasteboard-id [,flags]
119.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
119.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the file or hardcopy terminal to receive the contents
of the pasteboard buffer. The pasteboard-id argument is the
address of an unsigned longword that contains the pasteboard
identifier. The output device associated with pasteboard-id is
specified by the output-device argument of SMG$CREATE_PASTEBOARD.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies whether a form feed is passed.
The flags argument is the address of an unsigned longword
containing the flag. Valid values for flags are as follows:
0 No form feed is passed.
SMG$M_FORM_FEED The first line passed is a form feed.
120 – SMG$SNAPSHOT_TO_PRINTER
The Write Snapshot to Printer routine writes the current
pasteboard buffer to the printer attached to the terminal.
Format
SMG$SNAPSHOT_TO_PRINTER pasteboard-id ,device-type [,flags]
120.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
120.2 – Arguments
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Identifier of the pasteboard whose snapshot will be sent to a
printer. The pasteboard-id argument is the address of an unsigned
longword that contains the pasteboard identifier.
device-type
OpenVMS usage:device_name
type: character string
access: read only
mechanism: by descriptor
Specifies the type of printer to which the output associated with
this pasteboard will be written. The device-type argument is the
address of a descriptor that points to the name of the output
device. Valid values for this argument (for example, LA50) are
defined in SYS$SYSTEM:TERMTABLE.TXT.
flags
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies whether a form feed is passed.
The flags argument is the address of an unsigned longword
containing the flag. The valid value for the flags argument is
as follows:
SMG$M_FORM_FEED Output a form feed as the first record.
121 – SMG$UNPASTE_VIRTUAL_DISPLAY
The Remove Virtual Display routine removes a virtual display from
a pasteboard.
Format
SMG$UNPASTE_VIRTUAL_DISPLAY display-id ,pasteboard-id
121.1 – Returns
OpenVMS usage:cond_value
type: longword (unsigned)
access: write only
mechanism: by value
121.2 – Arguments
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual display to be removed from a pasteboard.
The display-id argument is the address of an unsigned longword
that contains the display identifier.
The display identifier is returned by SMG$CREATE_VIRTUAL_DISPLAY.
pasteboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the pasteboard from which the virtual display is
removed. The pasteboard-id argument is the address of an unsigned
longword that contains the pasteboard identifier.