Library /sys$common/syshlp/NCLHELP.HLB  —  show  x25_protocol, dte  Counters
 o  allocated pvc failures (OpenVMS)

    Number of times allocated PVCs have failed.

 o  calls failed

    Number of outgoing or incoming calls on the DTE that were either
    rejected or were disconnected during the data phase.

 o  creation time

    Time at which this entity was created.

 o  data octets received

    Number of data octets received on all virtual circuits on the
    DTE.

 o  data octets sent

    Number of data octets sent on all virtual circuits on the DTE.

 o  data PDUs received

    Number of data packets received on all virtual circuits on the
    DTE.

 o  data PDUs sent

    Number of data packets sent on all virtual circuits from the DTE.

 o  diagnostic packets

    Number of diagnostic packets received on all virtual circuits on
    the DTE.

 o  down transitions

    Number of times the status attribute state has changed from on to
    off, synchronizing, or unsynchronized.

 o  fast selects received

    Number of Fast Select requests received at the DTE.

 o  fast selects sent

    Number of Fast Select requests sent from the DTE.

 o  illegal packets

    Number of illegal packets received at the DTE.

 o  incoming calls connected

    Number of successful call requests received at the DTE.

 o  locally initiated resets

    Number of times a reset was initiated by the local X.25 Protocol
    module.

 o  locally initiated restarts

    Number of times a restart was initiated by the local X.25
    Protocol module.

 o  network initiated resets

    Number of times a reset was received.

 o  network initiated restarts

    Number of times a restart was received.

 o  outgoing calls connected

    Number of successful call requests sent from the DTE.

 o  protocol errors

    Number of protocol errors detected at the DTE.

 o  reject packets

    Number of reject packets received at the DTE.

 o  retry failures

    One of the maximum retry counts has been reached.

 o  up transitions

    Number of times the status attribute state has changed from off,
    synchronizing, or unsynchronized to on.
Close Help