o call timer
Default: Supplied by profile Value: Bounded by profile
Elapsed time, in seconds, before which a clear packet is sent
for outgoing calls from the DTE that have received no response. A
zero value indicates that no clear is sent.
o ccitt version
Default: 1984 Value: 1-9999
Version of the CCITT X.25 recommendations to which the DTE
conforms.
o clear timer
Default: Supplied by profile Value: Bounded by profile
Value of the retransmit timer for outgoing clear packets from the
DTE. The default value is profile dependent.
o default packet size
Default: 128 Value: 16-4096 raised to the power of 2
Default packet size, in octets, for all virtual circuits on the
DTE. The value must not be less than the value of the minimum
packet size characteristic.
o default window size
Default: 2 Value: 1-127
Default window size for all virtual circuits on the DTE; that
is, the default number of unacknowledged packets. This value
must not be greater than the value of the maximum window size
characteristic, and must not be less than the value of the
minimum window size characteristic.
o description
Manufacturer, product name and version of the hardware platform
of the DTE.
o extended packet sequencing
Default: False Value: True or false
Specifies whether the extended packet sequencing facility is
subscribed to, in which modulo 128 packet numbering is used. If
false, extended packet sequencing is not used. The profile may
provide overriding default or legal values.
o inbound dte class
Default: No DTE class name Value: Simple-name
Name of the DTE class to be associated with all incoming calls to
the DTE. You must specify this characteristic before you enable
the DTE. The x25 access dte class entity to which the name refers
must exist when you enable the DTE.
o incoming list
Default: (0-4095) ranges Value: Set of range (0-4095)
Channel number ranges that define the Logical Channel Numbers
(LCNs) that are available for calls on incoming or bothway
channels. Format the values to specify a set of channel number
ranges. Each channel number is the concatenation of the logical
channel group number and logical channel number of an SVC on the
DTE.
o interface type
Default: DTE Value: See description
Interface mode in which the packet protocol for the DTE will
operate. You can modify this characteristic only when the entity
is disabled.
dce DCE mode.
dte DTE mode.
negotiated The interface mode is negotiated with the other end
to be either DTE or DCE. This value applies only to
point-to-point links.
o interrupt timer
Default: Supplied by profile Value: Bounded by profile
Value of the interrupt timer. This timer is started when an
interrupt packet is sent. If no interrupt confirmation packet
is received before the timer expires, a reset is caused. A zero
value indicates that there is no timer.
o link service provider
Default: No link service provider name Value: Full-name
Name of the link service provider entity used by the DTE. You
must give this characteristic a value before you enable the DTE.
o maximum active circuits
Default: 4096 Value: 1-4096
Maximum number of virtual circuits that can be active at any time
on the DTE. This characteristic cannot be set.
o maximum clear attempts
Default: Supplied by profile Value: Bounded by profile
Number of times that sending a clear packet can be attempted on
a virtual circuit on the DTE. The value 1 indicates that a clear
packet is sent only once; that is, there are no retries.
o maximum packet size
Default: 128 Value: 16-4096 raised to the power of 2
Maximum packet size, in octets, for all virtual circuits on the
DTE. This value must be greater than or equal to the value of the
minimum packet size and default packet size characteristics.
o maximum reset attempts
Default: Supplied by profile Value: Bounded by profile
Number of times the DTE attempts to send a reset packet. The
value 1 indicates that a reset packet is sent only once; that is,
there are no retries.
o maximum restart attempts
Default: Supplied by profile Value: Bounded by profile
Number of times that any virtual circuit on the DTE attempts
to send a restart packet. The value 1 indicates that a restart
packet is sent only once; that is, there are no retries.
o maximum throughput class
Default: 4800 Value: See description
Maximum value for the throughput class (65535) of any virtual
circuit on the DTE. The value specified must be one of the
following: 0, 75, 150, 300, 600, 1200, 2400, 4800, 9600, 48000,
or 64000. The value must be greater than or equal to the value of
the minimum throughput class characteristic.
o maximum window size
Default: 2 Value: 1-127
Maximum number of unacknowledged packets for all virtual
circuits on the DTE. This value must be greater than or equal
to the value of the minimum window size and default window size
characteristics.
o minimum packet size
Default: 128 Value: 16-4096 raised to the power of 2
Minimum packet size, in octets, for all virtual circuits on the
DTE. This value must be less than or equal to the value of the
maximum packet size and default packet size characteristics.
o minimum throughput class
Default: Supplied by profile Value: Bounded by profile
Minimum throughput class for any virtual circuit on the DTE. The
value specified must be one of the following: 0, 75, 150, 300,
600, 1200, 2400, 4800, 9600, 48000, or 64000. The value must be
less than or equal to the value of the maximum throughput class
characteristic.
o minimum window size
Default: 2 Value: 1-127
Minimum window size for all virtual circuits on the DTE. This
value must be less than or equal to the value of the maximum
window size characteristic.
o outgoing list
Default: [1...4095] Value: Set of range (0-4095)
Channel number ranges that define the LCNs that are available
for calls on outgoing or two-way channels. Format the values to
specify a set of channel number ranges. Each channel number is
the concatenation of the logical channel group number and logical
channel number of an SVC on the DTE.
o profile
Default: No profile name
Name of the profile that provides subscription details of the
PSDN to which the DTE is connected. This characteristic cannot be
set, it is specified when the DTE is created.
o reset timer
Default: Supplied by profile Value: Bounded by profile
Value of the retransmit timer for outgoing reset packets from the
DTE. The default value is profile-dependent.
o restart timer
Default: Supplied by profile Value: Bounded by profile
Value of the retransmit timer for outgoing restart packets from
the DTE. The default value is profile dependent.
o segment size
Segment size specified for data sent at this DTE.
o x25 address
Default: No DTE address Value: DTE-address
Full address of the DTE. You must give this characteristic a
value before you enable the DTE.