o  account (OpenVMS)

    Default: No service/account data                 Value: String

    Default service or account data to be used when connecting to
    the X.25 server on the gateway system specified by the node
    characteristic or service node characteristic. This attribute is
    supported only for DTE classes with characteristic type remote.

 o  DNIC

    Default: Supplied by   Value: DTE address of 3 or 4 digits length
    profile

    The first part of the Network User Address (NUA). This takes
    one of two forms: Either it is in the form of the Data Network
    Identification Code (DNIC) and is specified by 4 digits, or it
    is in the form of a Data Country Code (DCC) and is specified by
    3 digits. If no profile is specified, the default is null.

 o  International prefix

    Default: Supplied by            Value: DTE address of 1 digit only.
    profile

    First digit of an X.121 address to indicate an international or
    internetwork call. If no profile is specified, the default is a
    null DTE address.

 o  local dtes

    Default: No names                             Value: Set of names

    Names of the local x25 protocol dte entities that belong to this
    DTE class. Note that these DTE entities need not exist when their
    names are entered in this set; DTEs that do not exist when the
    DTE class is used are not considered when the DTE class is used
    for an outgoing call.

    If an x25 protocol dte entity has status attribute state set to
    running when its name is added to local dtes, you must disable
    the DTE entity and reenable it (see the disable x25 protocol dte
    and enable x25 protocol dte commands) in order for the DTE to be
    considered when this DTE class is used for an outgoing call.

    You can specify this characteristic only for DTE classes with
    characteristic type local.

 o  local prefix

    Default: Supplied by            Value: DTE address of 1 digit only
    profile

    First digit of a DTE address to indicate a local call. If no
    profile is specified, the default is a null DTE address.

 o  node (OpenVMS)

    Default: No name                                Value: Full-name

    Node name of the remote gateway system on which the DTEs in this
    DTE class reside. Note that this characteristic is supported only
    if the service nodes characteristic is not supported.

    This characteristic is supported only for DTE classes
    with type characteristic set to remote.

 o  outgoing session template (OpenVMS)

    Default: Default or no name                        Value: String
    (see description)

    Name of the OSI Transport template to be used by the X.25 client to
    connect to the X.25 server on the gateway system. The default value
    default is valid only if OSI session control is being used. This
    attribute is supported only for DTE classes with characteristic
    type remote.

 o  profile

    Default: No profile                                Value: String

    Name of the profile that supplies the information required
    to perform X.121 mapping to or from a simple DTE address.
    The profile supplies the default values for the International
    prefix, Local prefix, DNIC and strip DNIC characteristics. This
    characteristic is specified by the profile argument in the create
    command. This argument is optional.

 o  security dte class

    Default: Default                                   Value: Name

    Name of the x25 access security dte class entity that controls
    inbound and outbound access using this DTE class.

 o  service nodes (OpenVMS)

    Default: No records                        Value: Set of records

    Names of the nodes that may be used as candidate X.25 gateway
    systems and their associated ratings. Each record consists of
    a full name that describes the candidate node and an integer
    that indicates its ratings. The records are listed in order
    of descending rating. Values are entered as [node=nodename,
    rating=integer]. The rating represents the maximum number of
    session control connections to the node pair.

 o  strip DNIC

    Default: False                             Value: True or false

    Defines whether the first part of the NUA (the DNIC or DCC
    specified by the DNIC characteristic) should be stripped for
    outgoing calls, and whether the network strips the first portion
    of the NUA from addresses it presents to the DTE.

 o  type

    Type of DTE class.

    local      The DTE class consists of local DTEs.

    remote     The DTE class consists of DTEs on a remote gateway
               system.

    The value of this characteristic is specified by the type
    argument in the create command.

 o  user (OpenVMS)

    Default: No user ID                                 Value: String

    Default user identification to be used when connecting to the
    gateway system specified by the service nodes characteristic.