o  authorized access priority

    The maximum transmit priority allowed for this station. The value
    is set by the ring parameter server.

 o  authorized function classes

    The bit map of the authorized function classes for this station.

 o  functional address

    The functional address bit map enabled in the adapter for the
    reception on this station.

 o  group addresses

    The set of group addresses enabled in the adapter for reception
    on this station.

 o  insert error reason

    Reason code for an insertion error if there was a failure to
    insert into the ring, or insertion successful if no error.

    no open		An error occurred during the insertion phase.

    bad parameters	Invalid options specified to the
      			adapter to insert into the ring.

    lobe fault		Lobe test fault or MAC frames were
      			received before physical insertion.

    signal loss		Signal loss condition was detected
      			during the insertion phase.

    timeout		Logical insertion onto the ring failed
      			before insertion timer expired.

    ring failure		Unable to receive its own ring purge
      			MAC frames after becoming the active monitor.

    ring beaconing	A beacon MAC frame was received
      			after physical insertion onto the ring.

    duplicate address	Another station on the ring already has the
      			address this station wishes to use.

    parameter server 	A Ring Parameter Server (RPS) is present on
    error		the ring but does not respond to a request
      			initialization MAC frame.

    remove frame 	A remove station MAC frame
    received		was received during the insertion process.

    insertion successful	The insertion phase was successful.

 o  link state

    Data link state of this ring station.

    off		Station is not on the ring.

    running	Station is available to the user for processing.

    initializing	Station is in process of inserting into the ring.

    recovery	Station is beaconing.

    contending	Station is participating in the monitor contention
  		process.

    broken	Station has failed the insertion process.

 o  MAC address

    The currently active station address value for which the data
    link is receiving an individually addressed frame.

 o  nearest upstream neighbor

    The MAC address of the last known upstream ring neighbor as heard
    from the ring poll process.

 o  physical drop number

    The physical drop number assigned by the ring parameter server.

 o  receive mode

    The receive mode of the station. Normal or promiscuous.

 o  ring error reason

    Reason code for the most recent ring error detected by this
    station or no error if none has occurred.

    no error	Successful operation, no error has occurred.

    ring in 	Claim token MAC frames were observed on the ring.
    recovery

    single 	It sensed this is the only station on the ring.
    station

    remove frame A remove ring station MAC frame request was
    received	received and the station has deinserted from the
      		ring.

    auto-removal	The auto-removal process has failed and the station
    failure	has deinserted from the ring.

    lobe fault	An open or short circuit in the lobe wire cable was
      		detected.

    transmitting	Beacon frames are transmitted to the ring.
    beacon

    soft error 	A report error MAC frame has been transmitted.
    frame sent

    beaconing 	Beacon frames are presently transmitted or received
    condition	to or from the ring.

    signal loss	A loss of signal was detected on the ring.

    open in 	Station is in process of inserting into the ring.
    progress

 o  ring number

    The local ring number as received from the ring parameter server.

 o  ROM address

    The IEEE Universally Administered address present in the ROM of
    the adapter.

 o  transparent source routing

    State of transparent source routing support.

 o  state

    Operational state of the station.

 o  uid

    Entity's unique identifier, which is generated when the entity is
    created.