o  acknowledge timer

    Default: 1000          Value: 1-60000

    Time, in milliseconds, that the link waits for an
    acknowledgment before initiating recovery action. The granularity
    of this timer is 10 milliseconds. Values that are not multiples of
    10 are rounded up.

 o  busy timer

    Default: 10000         Value: 1-60000

    Time, in milliseconds, that the link waits for indication
    of the clearance of a busy condition at the remote station.
    The granularity of this timer is 10 milliseconds. Values that are
    not multiples of 10 are rounded up.

 o  holdback timer

    Default: 500           Value: 0-60000

    Delay, in milliseconds, before an acknowledgment
    must be sent. The granularity of this timer is 10 milliseconds.
    Values that are not multiples of 10 are rounded down.

 o  local receive window size

    Default: 127           Value: 1-127

    Window size used by the link for receiving frames.

 o  maximum data size

    Default: 1028          Value: 1-65531

    Largest frame size, in octets, the link can use to
    send or receive data. This value does not include the size of the
    frame header.

 o  poll timer

    Default: 1000          Value: 1-60000

    Time, in milliseconds, the link waits for a response
    with the F bit set. The granularity of this timer is
    10 milliseconds. Values that are not multiples of 10
    are rounded up.

 o  reject timer

    Default: 3000          Value: 1-60000

    Time, in milliseconds, the link waits for a reply to
    a REJ (reject) frame. The granularity of this timer is
    10 milliseconds. Values that are not multiples of 10
    are rounded up.

 o  remote lsap address

    Default: 7E            Value: Hex-number

    Address of the destination LSAP (local service access point) to be
    used by the link. The lowest significant bit must be clear; the
    specified address must be an individual address.

 o  remote mac address

    Default: 00-00-00-00-00-00      Value: LAN-address

    Specifies the destination MAC address to be used by the link.
    The lowest significant bit of the first octet must be clear;
    that is, the address must be an individual address.

 o  retry maximum

    Default: 10            Value: 1-255

    Maximum number of times the link retransmits a frame
    before assuming a fatal error and taking more drastic recovery
    action.