Library /sys$common/syshlp/NCLHELP.HLB  —  show  csma-cd  station  Status
 o  address filters

    All individual MAC addresses currently enabled by any of the
    ports on the station.

 o  communication port

    DECnet-Plus device name for the station.

 o  hardware address

    Individual medium access control (MAC) address that was assigned
    during manufacture of the communications hardware that is
    associated with the station.

 o  mac address

    Current MAC address (if any) of the station. For more information
    about the MAC address, see the enable command.

 o  receive mode

    Current receive mode for the station. Some stations may not
    support all modes.

    normal         The station receives only those frames (individual
                   and multicast) that meet the normal format,
                   protocol, and access control requirements.

    all            The station receives all individual-addressed
    multicast      frames that meet the normal format, protocol, and
                   address requirements, and all multicast-addressed
                   frames regardless of their format, protocol, and
                   address types. This function is only supported on
                   OpenVMS.

    promiscuous    The station receives all frames (individual and
                   multicast) regardless of format, Ethernet protocol
                   type, SNAP identifier, LLC SAP address, or MAC
                   address. This function is only supported on
                   OpenVMS.

 o  state

    Operational state of the station.

    failed         Either an attempt to enable the station failed
                   during the self-test or the station was on and the
                   data link determined that the station would now
                   fail the self-test.

    initializing   The station is currently being initialized and
                   tested by the data link.

    off            The station is disabled.

    on             The station is enabled and available for use.

    For more information on station states, see the Network
    Management manual.

 o  uid

    Entity's unique identifier, which is generated when the station
    is created.
Close Help