Library /sys$common/syshlp/MSA_UTIL_HELP.HLB  —  LOCATE
              Format:
                      LOCATE <parameter>

              When the above-mentioned command is executed, the LEDs of
              the requested drives will blink. These LEDs are visible from
              the front of the attached storage enclosures.

              Note:
                   - If time limit is not included with the
                     LOCATE command, the LEDs will blink for
                     30 seconds. In some cases, the LEDs may
                     not blink but will remain steady.

                   - LOCATE command, does not work from the
                     STANDBY CONTROLLER
Additional Information: explode extract
ALL BOX BUS CANCEL DISKS UNIT Qualifiers Examples
Close Help