1.LANCP> SHOW NODE
Node Listing:
GALAXY (08-00-2B-2C-51-28):
MOP DLL: Load file: APB.EXE
Load root: $64$DIA24:<SYS11.>
Boot type: Alpha satellite
ZAPNOT (08-00-2B-18-7E-33):
MOP DLL: Load file: NISCS_LOAD.EXE
Load root: LAVC$SYSDEVICE:<SYS10.>
Boot type: VAX satellite
CALPAL (08-00-2B-08-9F-4C):
MOP DLL: Load file: READ_ADDR.SYS
Last file: LAN$DLL:APB_X5WN.SYS
Boot type: Other
2 loads requested, 1 volunteered
1 succeeded, 0 failed
Last request was for a system image, in MOP V4 format
Last load initiated 10-JUN-1998 09:11:17
on EXA0 for 00:00:06.65
527665 bytes, 4161 packets, 0 transmit failures
Unnamed (00-00-00-00-00-00):
Totals:
Requests received 2
Requests volunteered 1
Successful loads 1
Failed loads 0
Packets sent 2080
Packets received 2081
Bytes sent 523481
Bytes received 4184
Last load CALPAL at 10-JUN-1998 09:11:17.29
This example shows output from a command issued on a local node
on which there are three nodes defined (GALAXY, ZAPNOT, and
CALPAL). CALPAL has issued two load requests:
o The first request is the multicast request from CALPAL that
the local node volunteered to accept.
o The second request is the load request sent directly to the
local node by CALPAL for the actual load data. The elapsed
time from the second load request to completion of the load
was 6.65 seconds.
2.LANCP> SHOW NODE VAXSYS
Displays node characteristics and counters information from the
LAN volatile node database for node VAXSYS.
3.LANCP> SHOW NODE/ALL VAX
Displays node characteristics and counters information from the
LAN volatile node database for all nodes whose name begins with
VAX.
4.LANCP> SHOW NODE/ALL
Displays node characteristics and counters information from the
LAN volatile node database for all nodes.
5.LANCP> SHOW NODE/ALL/OUTPUT=TMP.INI
Writes a list of all nodes to the file TMP.INI.