HELPLIB.HLB  —  CQUAL Routines, UTIL$CQUAL_CONFIRM_ACT
    The UTIL$CQUAL_CONFIRM_ACT routine prompts the user for
    confirmation, using the optional prompt routine if present, and
    returns an indication of the user's response.

    Format

      UTIL$CQUAL_CONFIRM_ACT  [prompt_string_1] [,prompt_string_2]

                              [,prompt_rtn] [,current_form]

1  –  Returns

    OpenVMS usage:cond_value
    type:         longword (unsigned)
    access:       write only
    mechanism:    by value

    Longword condition value. Most utility routines return a
    condition value in R0. Condition Values Returned lists condition
    values that this routine returns.

2  –  Arguments

 prompt_string_1

    OpenVMS usage:longword_unsigned
    type:         longword (unsigned)
    access:       read only
    mechanism:    by descriptor
    Longword address of a prompt string descriptor. The prompt is
    used when prompting to a terminal device, and the current prompt
    form is UTIL$K_CQF_SHORT.

 prompt_string_2

    OpenVMS usage:longword_unsigned
    type:         longword (unsigned)
    access:       read only
    mechanism:    by descriptor
    Longword address of a prompt string descriptor. The prompt is
    used when prompting to a terminal device, and the current prompt
    form is UTIL$K_CQF_LONG.

 prompt_rtn

    OpenVMS usage:procedure
    type:         longword (unsigned)
    access:       function call
    mechanism:    by value
    Longword address of a user-supplied routine for prompting and
    accepting user input. The user routine is responsible for end-of-
    file processing and must return RMS$_EOF when appropriate.

 current_form

    OpenVMS usage:longword_unsigned
    type:         longword (unsigned)
    access:       read write
    mechanism:    by reference
    This optional parameter supplies the initial prompt form to be
    displayed to the user. If present, this parameter receives the
    form of the last prompt displayed. The following table shows the
    valid prompting form values:

    Table 3-2 Prompting Form Values

    Value                       Description

    UTIL$K_CQF_SHORT            Use prompt_string_1.
    UTIL$K_CQF_LONG             Use prompt_string_2.
    UTIL$K_CQF_UNSPECIFIED      None specified; use default.

3  –  Description

    UTIL$CQUAL_CONFIRM_ACT prompts the user for confirmation. You
    must supply at least one prompt string to this routine. If you
    supply both strings, you should have an expanded and condensed
    form of the prompt. The condensed form should be supplied through
    the prompt_string_1 parameter; the expanded form through prompt_
    string_2. The prompt string supplied by prompt_string_1 is
    initially used if the prompt_string_1 is present, does not have a
    length of zero, and either:

    o  The current_form parameter is not specified

    o  The current_form parameter is specified and contains:

       -  UTIL$K_CQF_SHORT

       -  UTIL$K_CQF_UNSPECIFIED

       -  A value greater than UTIL$K_CQF_MAX_FORM

    The prompt string supplied by prompt_string_2 is used initially
    if prompt_string_2 is present, does not have a length of zero,
    and either:

    o  prompt_string_1 is not present or has a length of zero

    o  The current_form parameter is specified and contains the value
       UTIL$K_CQF_LONG

    Once the initial form is displayed, the user can switch between
    the two forms by responding to the prompt with either CONDENSED
    or EXPANDED. The user can only switch to another form if there
    was a prompt string provided for that form. Responding with
    either CONDENSED or EXPANDED causes a reprompt to occur, even
    if the current display form was not switched.

    If a prompt routine is provided, the routine is called with the
    address of the prompt string descriptor in the first parameter,
    and the string descriptor address to receive the user's response
    in the second parameter. The routine returns a success status or
    RMS$_EOF.

    If an unsuccessful status other than RMS$_EOF is received, then
    UTIL$CQUAL_CONFIRM_ACT exits without processing any response
    in the response buffer (the second parameter that was passed to
    the prompt routine). UTIL$CQUAL_CONFIRM_ACT returns the status
    received from the user prompt routine. The prompt routine is
    responsible for end-of-file processing, and must return RMS$_EOF
    when appropriate. If an optional prompt routine is provided, it
    should be provided for all calls to UTIL$CQUAL_CONFIRM_ACT. Not
    doing so can cause unpredictable end-of-file processing.

    When the user is prompted, they may respond with the following:

    Table 3-3 Prompt Responses

    Positive  Negative
                       Stop       Stop       Switch
    Response  Response Processing Prompting  Prompts

    YES       NO       QUIT       ALL        CONDENSED
    TRUE      FALSE    Ctrl/Z                EXPANDED
    1         0
              <Return>

                                   NOTE

       Entering ALL assumes that subsequent files are a positive
       response from the user, and no further prompting occurs.
       The routine UTIL$CQUAL_FILE_MATCH properly handles this
       response. Since UTIL$CQUAL_CONFIRM_ACT does not contain
       context from a previous call, callers of this routine
       should not call UTIL$CQUAL_CONFIRM_ACT if the user has
       previously responded ALL unless the application needs
       explicit confirmation on certain items.

    The user can use any combination of uppercase and lowercase
    letters for word responses. Word responses can be abbreviated
    to one or more letters (for example, T, TR, or TRU for TRUE), but
    these abbreviations must be unique.

    After a valid response is received from the user, the procedure
    returns the current_form parameter. The current_form parameter
    contains the last form presented to the user if it was specified
    and write access is permitted.

4  –  Condition Values Returned

    SS$_NORMAL         Positive answer.
    LIB$_NEGANS        Negative answer.
    UTIL$_QUIPRO       Quit processing.
    UTIL$_QUICONACT    Continue processing, but cease prompting.
    LIB$_INVARG        Invalid argument list (no prompt strings).
    SS$_ACCVIO         Access violation (on user routine address).

    Any unsuccessful return from RMS, SYS$ASSIGN, $QIOW, or from the
    user-supplied routine (other than RMS$_EOF).
Close Help