This directory, known by the logical name SYS$SYSTEM, contains
executable images commonly used by the operating system.
1 – ACC.EXE
Accounting utility
2 – ACLEDT.EXE
Access control list (ACL) editor
3 – ACME_SERVER.EXE
Authentication and Credential Management process serving $ACM
system service requests
4 – ACPIDUMP.EFI
This file is included in the latest system build, but a description of the file is not available.
5 – ADMTOOL.EXE
GUI tool to manage print queues, serial ports,
and installed software
6 – AGEN$FEEDBACK.EXE
AUTOGEN feedback image file
7 – ALPHAVMSSYS.PAR
System parameter file
8 – ALPHA_CHECKSUM.EXE
This file is included in the latest system build, but a description of the file is not available.
9 – ALPHA_MACRO.EXE
Executable for the MACRO-32 compiler for OpenVMS Alpha;
activated when the MACRO/MIGRATION command is issued
10 – AMDS$RMCP.EXE
Startup program for DECamds Data Collector
11 – ANALAUDIT.EXE
ANALYZE/AUDIT image
12 – ANALYZBAD.EXE
ANALYZE/MEDIA image
13 – ANALYZOBJ.EXE
ANALYZE/IMAGE and ANALYZE/OBJECT image
14 – ANALYZRMS.EXE
ANALYZE/RMS_FILE image
15 – ANALYZSSL.EXE
This file is included in the latest system build, but a description of the file is not available.
16 – APB.EXE
Alpha primary bootstrap
17 – APB_BOOTP.EXE
Provides the APB functionality over the BOOTP protocol
18 – AUDIT_SERVER.EXE
Audit server image
19 – AUTHORIZE.EXE
User authorization program
20 – AXPVMS$PCSI_INSTALL.COM
Installation/upgrade procedure for OpenVMS Alpha
21 – AXPVMS$PCSI_INSTALL_LP.COM
Installs layered products when booted from the OpenVMS Alpha
operating system CD-ROM
22 – AXPVMS$PCSI_INSTALL_MESSAGES.COM
Installation/upgrade messages for OpenVMS Alpha
23 – AXPVMS$PCSI_INSTALL_MIN.COM
Installs OpenVMS Alpha with no options on a disk other than
your regular system disk. You can then boot from the other
disk to back up your system disk.
24 – BACKUP$MANAGER.EXE
Backup Manager utility
25 – BACKUP.EXE
Backup utility
26 – BADBLOCK.EXE
Dynamic bad block Files-11 ACP subprocess
27 – BIOSUTIL.EFI
This file is included in the latest system build, but a description of the file is not available.
28 – BIRTHS.MSGHLP
File used to update the Help Message database
29 – CDDVD$CP.EXE
This file is included in the latest system build, but a description of the file is not available.
30 – CDRECORD.EXE
Executable file that supports writable CD-ROMs
31 – CDU.EXE
Command Definition utility
32 – CHECKSUM.EXE
Used during installation of system updates
33 – CIA.EXE
SHOW INTRUSION and DELETE/INTRUSION_RECORD image
34 – CONFIGURE.EXE
File from prior versions of OpenVMS that replaces QIO$CONFIGURE
35 – CONVERT.EXE
Convert utility
36 – CONVERT_OLD.EXE
Convert utility prior to OpenVMS Version 7.2
37 – CONVERT_PROXY.EXE
Image to convert NETPROXY.DAT into NET$PROXY.DAT
38 – COPY.EXE
Copy utility
39 – CREATE.EXE
File and directory creation utility
40 – CREATEFDL.EXE
CREATE/FDL image
41 – CSP.EXE
Cluster server process image
42 – CSPMOUNT_CLIENT.EXE
This file is included in the latest system build, but a description of the file is not available.
43 – CSPSWVERS.EXE
Runs at startup in cluster to check software version and MAXSYSGROUP
44 – CWLOGINIT.EXE
Command procedure that initializes clusterwide logical name
structures on a nonclustered node so the programming environment
is consistent with that of a clustered node
45 – DBGHK$HOST_KERNEL.COM
Command procedure to run DBGHK$HOST_KERNEL.EXE
46 – DBGHK$HOST_KERNEL.EXE
Image file used by OpenVMS Alpha System-Code Debugger
47 – DBGHK$PRCDUMP_KERNEL.COM
Command procedure to run DBGHK$PRCDUMP_KERNEL.EXE
48 – DBGHK$PRCDUMP_KERNEL.EXE
Image file used when analyzing process dumps
49 – DBGHK$SYSDUMP_KERNEL.COM
Command procedure to run System Dump Debug; used with
the ANALYZE CRASH command within DEBUG
50 – DBGHK$SYSDUMP_KERNEL.EXE
Image file used by the ANALYZE CRASH
command within DEBUG
51 – DBLMSGMGR_TV.EXE
Translated image file of DIBOL message manager
52 – DCE$ADD_ID.EXE
Adds the NET$DECLAREOBJECT identifier to the DCE$SERVER
account, which enables object creation without SYSNAM privilege
53 – DCE$DCED.EXE
Manages RPC endpoint map, handles DCE functions, and provides
a management interface
54 – DCE$RPCCP.EXE
RPC control program that provides command line interface to
examine and manipulate the RPC endpoint map
55 – DCE$RPCD.EXE
RPC daemon image that creates and manages the RPC endpoint map
56 – DCE$RPCPERF_CLIENT.EXE
RPC performance client image that tests RPC functionality
over supported network transports and authentication options
57 – DCE$RPCPERF_SERVER.EXE
RPC performance server image that tests RPC functionality
over supported network transports and authentication options
58 – DCL.EXE
Digital Command Language (DCL) command interpreter
59 – DDTM$XG_SERVER.EXE
DECdtm XA Gateway services image
60 – DEATHS.MSGHLP
File used to update the Help Message database
61 – DEBUG_APB.EXE
Debugging version of the Alpha Primary Bootstrap program
62 – DECDTMDEF.STB
DECdtm symbol file
63 – DECW$CONFIG.EXE
New configuration utility to support USB
64 – DECW$DWT_DECNET.EXE
File that allows you to use the LAT transport to an Xterminal and
then translate it to DECnet
65 – DECW$DWT_FONT_DAEMON.EXE
Xterminal font daemon that allows an Xterminal to load its fonts
from a host using the LAT transport
66 – DECW$DWT_STARTXTDRIVER.EXE
User program that turns on Xterminal support (if a site
chooses not to use the DECwindows terminal font daemon)
67 – DECW$FONTCOMPILER.EXE
DECwindows font compiler utility
68 – DECW$REINIT.EXE
DECwindows startup image
69 – DECW$SERVER_MAIN.EXE
DECwindows Motif for OpenVMS systems display server main image
70 – DECW$SETSHODIS.EXE
DECwindows SET DISPLAY/SHOW DISPLAY utility
71 – DECW$TABLET.EXE
DECwindows tablet (input device) handler image
72 – DECW$XAUTH.EXE
X Authority utility (xauth) used to view and manage entries in an
X authority file
73 – DECW$XFS.EXE
DECwindows font server image
74 – DELETE.EXE
File deletion/purge utility
75 – DIA$STUB.EXE
This file is included in the latest system build, but a description of the file is not available.
76 – DIFF.EXE
File compare utility
77 – DIRECTORY.EXE
Directory utility
78 – DISKQUOTA.EXE
Disk Quota utility
79 – DISMOUNT.EXE
Volume dismount utility
80 – DSRINDEX.EXE
RUNOFF/INDEX image
81 – DSRTOC.EXE
RUNOFF/CONTENTS image
82 – DTEPAD.EXE
SET HOST/DTE image
83 – DTR.COM
DTRECV.EXE server initiating procedure
84 – DTRECV.EXE
DTSEND server
85 – DTSEND.EXE
DECnet for OpenVMS logical links test program
86 – DTSS$SET_TIMEZONE.EXE
This file is included in the latest system build, but a description of the file is not available.
87 – DUMP.EXE
Dump utility
88 – EDF.EXE
Edit/FDL utility image
89 – EDF_TV.EXE
Translated image file of Edit/FDL utility
90 – EDT.EXE
Image file of EDT Editor
91 – EFI$BCFG.EXE
This file is included in the latest system build, but a description of the file is not available.
92 – EFI$CP.EXE
This file is included in the latest system build, but a description of the file is not available.
93 – EFI$SET.EXE
This file is included in the latest system build, but a description of the file is not available.
94 – EFI$SHOW.EXE
This file is included in the latest system build, but a description of the file is not available.
95 – EFICHK.EFI
This file is included in the latest system build, but a description of the file is not available.
96 – ELV$EVENT.DAT
Bit-to-text translation data for error log events for
the Error Log Viewer (ELV)
97 – ELV$HEADER.DAT
Bit-to-text translation data for error log header formats for the
Error Log Viewer (ELV)
98 – ELV.EXE
Executable image file for the Error Log Viewer (ELV)
99 – ENCRYPT$AUTH.EXE
This file is included in the latest system build, but a description of the file is not available.
100 – ENCRYPT$FAC.EXE
This file is included in the latest system build, but a description of the file is not available.
101 – ENCRYPT$NUL_ALG.EXE
This file is included in the latest system build, but a description of the file is not available.
102 – ERF.EXE
ANALYZE/ERROR image
103 – ERRFMT.EXE
Error logging facility
104 – ESS$INFOSERVER.EXE
This file is included in the latest system build, but a description of the file is not available.
105 – ESS$LADCP.EXE
LADCP utility image
106 – ESS$LASTCP.EXE
LASTCP utility image
107 – EVL.COM
Command file used by DECnet for OpenVMS error logging
108 – EVL.EXE
DECnet for OpenVMS event logging program
109 – EXCHANGE$NETWORK.EXE
EXCHANGE/NETWORK command processor
110 – EXCHANGE.EXE
Exchange utility
111 – F11CACP.EXE
ISO 9660 ACP
112 – F11DACP.EXE
High Sierra ACP
113 – FAL.COM
FAL startup procedure
114 – FAL.EXE
DECnet for OpenVMS file access listener
115 – FASTPATH_SERVER.EXE
Server process image that handles I/O fastpath port reassignment
requests, and balances I/O fastpath ports over available CPUs
116 – FILESERV.EXE
File system cache flush server
117 – FIRM_REV_MATRIX.DAT
Data file containing the recommended SRM console values
for supported Alpha platforms; used for checking the revision
of SRM console
118 – FSINFO.EXE
Font server information utility
119 – FSLSFONTS.EXE
Font server font listing utility
120 – FTP.EFI
This file is included in the latest system build, but a description of the file is not available.
121 – FTPCTRL.EFI
This file is included in the latest system build, but a description of the file is not available.
122 – FTPD.EFI
This file is included in the latest system build, but a description of the file is not available.
123 – GCM_SERVER.EXE
GCM Server image
124 – GCU.EXE
OpenVMS Galaxy Configuration Utility (GCU), a
DECwindows Motif application that allows system managers
to configure and manage their OpenVMS Galaxy system from
a single workstation window. See HELP CONFIGURE GALAXY.
125 – GENCAT.EXE
Utility to generate message catalogs
126 – GICAP.RULES
This file is included in the latest system build, but a description of the file is not available.
127 – GICAP.RULES_LIST
This file is included in the latest system build, but a description of the file is not available.
128 – GLX$DUMP_SHARED_MEMORY.EXE
Image file used by the DUMP/SHARED_MEMORY command
within an OpenVMS Galaxy system
129 – GLX$LICENSE_SERVER.EXE
Whenever a CPU becomes active or inactive in a Galaxy instance,
the Galaxy license server verifies that the number of CPUs is
within the limits of the number of units entered in the license
database.
130 – HLD.COM
Command procedure used by HLD.EXE
131 – HLD.EXE
Downline task loading program
132 – HSCPAD.EXE
SET HOST/HSC command processor
133 – I64VMS$PCSI_INSTALL_LP.COM
This file is included in the latest system build, but a description of the file is not available.
134 – I64VMS$PCSI_INSTALL_MIN.COM
This file is included in the latest system build, but a description of the file is not available.
135 – I64_CHECKSUM.EXE
This file is included in the latest system build, but a description of the file is not available.
136 – IA64_LINK.EXE
This file is included in the latest system build, but a description of the file is not available.
137 – ICAPINIT.EXE
This file is included in the latest system build, but a description of the file is not available.
138 – ICAPMANAGE.EXE
This file is included in the latest system build, but a description of the file is not available.
139 – ICAP_MODIFY.EXE
This file is included in the latest system build, but a description of the file is not available.
140 – ICAP_NOTIFY.EXE
This file is included in the latest system build, but a description of the file is not available.
141 – ICAP_SERVER.EXE
This file is included in the latest system build, but a description of the file is not available.
142 – ICAP_STAT.EXE
This file is included in the latest system build, but a description of the file is not available.
143 – ICONV.EXE
Utility to convert code sets
144 – ICONVC.EXE
Utility to compile code-set converter tables
145 – IFCONFIG.EFI
This file is included in the latest system build, but a description of the file is not available.
146 – IMGDMP_RIGHTS.EXE
Image file used to create rights identifiers for process dumps
147 – INDICTMENT_SERVER.EXE
The Component Indictment server, which processes indictment requests
to stop CPUs
148 – INIT.EXE
Disk device initialization utility
149 – INSTALL.EXE
Utility that installs known images
150 – INS_STARTUP.COM
Startup procedure that runs AUTOGEN and, optionally,
CLUSTER_CONFIG the first time a newly-installed/upgraded
system is booted
151 – INS_STARTUP_MESSAGES.COM
Messages for the startup procedure that runs AUTOGEN
and, optionally, CLUSTER_CONFIG the first time a
newly-installed/upgraded system is booted
152 – IPB.EXE
This file is included in the latest system build, but a description of the file is not available.
153 – IPCACP.EXE
Interprocess Communications Ancillary Control Process
154 – IPCDEF.STB
Symbol table for IPC routines. IPC is a set of unsupported
system routines on which ICC is layered.
155 – ISCSI$CONTROL_PROGRAM.EXE
This file is included in the latest system build, but a description of the file is not available.
156 – JBC$COMMAND.EXE
Utility that supports the OpenVMS Batch and Print Queuing System
during shutdown; reserved for system use only
157 – JBC$JOB_CONTROL.EXE
OpenVMS Alpha job controller image
158 – KADMIN.EXE
Kerberos administration client image
159 – KADMIND.EXE
Kerberos administration daemon image
160 – KADMIN_LOCAL.EXE
Kerberos administration client image, local version
161 – KDB5_UTIL.EXE
Kerberos KDC database utility image
162 – KDESTROY.EXE
Kerberos ticket cache destroyer client image
163 – KERBEROS.EXE
Kerberos DCL interface image
164 – KINIT.EXE
Kerberos ticket cache initializer image
165 – KLIST.EXE
Kerberos ticket cache display image
166 – KPASSWD.EXE
Kerberos user password modification image
167 – KPROP.EXE
Kerberos propagation client image
168 – KPROPD.EXE
Kerberos propagation daemon image
169 – KRB$KILL.EXE
Image to signal Kerberos KDC and ADMIN servers to shutdown
170 – KRB5KDC.EXE
Kerberos KDC server image
171 – LANACP.EXE
LAN Server Process controlled by LANCP to perform LAN-related
functions such as MOP downline load service
172 – LANCP.EXE
LAN Control Program utility, which enables you to configure and
control the LAN software on OpenVMS systems
173 – LATACP.EXE
ACP for LAT driver
174 – LATCP.EXE
LAT Control Program (LATCP) utility image
175 – LATSYM.EXE
Print symbiont for LAT printers
176 – LCKMGR_SERVER.EXE
Dedicated CPU Lock Manager
177 – LD$UTILITY.EXE
LDDRIVER utility file
178 – LDAP_LOAD_LOCALUSER_DATABASE.EXE
This file is included in the latest system build, but a description of the file is not available.
179 – LDLOCALE.EXE
Utility to load binary locales into memory
180 – LIBRARIAN.EXE
Librarian utility
181 – LINK.EXE
Linker
182 – LMCP.EXE
Log Manager Control Program (LMCP) utility
183 – LMF$LICENSE.LDB
System-specific LICENSE database
184 – LMF$LURT.DAT
License Management facility file
185 – LMF$OE.DAT
This file is included in the latest system build, but a description of the file is not available.
186 – LMF.EXE
License Management facility program
187 – LOAD_UNICODE_TABLE.EXE
Utility to load unicode upcase table
188 – LOCALE.EXE
Utility to examine current locale
189 – LOCALEDEF.EXE
Utility to compile locale source into binary locale
190 – LOGINOUT.EXE
Login/logout utility
191 – LTPAD.EXE
LAT terminal emulator for SET HOST command
192 – MACRO.EXE
This file is included in the latest system build, but a description of the file is not available.
193 – MAIL.COM
Command procedure used by DECnet for OpenVMS mail
194 – MAIL.EXE
Mail utility
195 – MAIL.OLD
Image for pre-Version 7.0 Mail utility, which you can access
using the MAIL/OLD command
196 – MAILEDIT.COM
Default Mail editing command procedure
197 – MAIL_SERVER.EXE
Mail server image
198 – MDMANAGER.EXE
This file is included in the latest system build, but a description of the file is not available.
199 – MESSAGE.EXE
Message compiler
200 – MIME.EXE
MIME utility image
201 – MIRROR.COM
MIRROR startup procedure
202 – MIRROR.EXE
DECnet for OpenVMS node loopback server
203 – MOM.COM
Maintenance operations module DECnet for OpenVMS command
procedure
204 – MOM.EXE
Maintenance operations module image
205 – MONITOR.EXE
This file is included in the latest system build, but a description of the file is not available.
206 – MSA$UTIL.EXE
This file is included in the latest system build, but a description of the file is not available.
207 – MSGHLP$MAIN.EXE
Main program (DCL interface) for Help Message routines
208 – MTAAACP.EXE
Magnetic tape ancillary control process
209 – NCP.EXE
Network Control Program
210 – NCS.EXE
National Character Set utility
211 – NETACP.EXE
DECnet for OpenVMS ancillary control process
212 – NETDEF.STB
Symbols for DECnet for OpenVMS data structures (not supported by HP)
213 – NETSERVER.COM
Network server DECnet for OpenVMS command procedure
214 – NETSERVER.EXE
Network server image
215 – NETWRK$NETWORK.EXE
Executes the code for SHOW NETWORK, SET NETWORK, START/NETWORK
and STOP/NETWORK commands
216 – NICONFIG.COM
Ethernet configurator DECnet for OpenVMS command procedure
217 – NICONFIG.EXE
Ethernet configurator image
218 – NML.COM
Network management listener (NML) server startup procedure
219 – NML.EXE
DECnet for OpenVMS network management listener
220 – NPARDELETECLASS.EXE
This file is included in the latest system build, but a description of the file is not available.
221 – NTA$LOGON.EXE
Adds NTLM security context to user's security profile
222 – OPCCRASH.EXE
System shutdown utility
223 – OPCOM.EXE
Operator communications utility
224 – OPENVMS$FTP.EXE
Placeholder image for COPY/FTP operation
225 – OPENVMS$FTPDIR.EXE
Placeholder image for DIRECTORY/FTP
226 – OPENVMS$RCP.EXE
Placeholder image for COPY/RCP
227 – OPENVMS$RLOGIN.EXE
Placeholder image for SET HOST/RLOGIN
228 – OPENVMS$TELNET.EXE
Placeholder image for SET HOST/TELNET
229 – OPENVMS$TN3270.EXE
Placeholder image for SET HOST/TN3270
230 – PARAMS.DAT
System Generation utility parameter data file
231 – PATCH.EXE
This file is included in the latest system build, but a description of the file is not available.
232 – PCSI$MAIN.EXE
POLYCENTER Software Installation (PCSI) PRODUCT command utility
233 – PHONE.EXE
Phone utility
234 – PING.EFI
This file is included in the latest system build, but a description of the file is not available.
235 – PPPD$LOGGER.EXE
Logging for debug trace facility in the PPPD utility
236 – PPPD$UTIL.EXE
Point-to-point protocol utility (PPPD)
237 – PRTSMB.EXE
Print symbiont
238 – QMAN$QUEUE_MANAGER.EXE
OpenVMS Alpha queue managing utility
239 – QUEMAN.EXE
Queue managing utility
240 – RECLAIM.EXE
CONVERT/RECLAIM image
241 – RECOVER.EXE
OpenVMS RMS recovery utility
242 – REG$CP.EXE
Management control program used to manage the OpenVMS Registry
243 – REGISTRY$SERVER.EXE
OpenVMS Registry server image
244 – REMACP.EXE
Remote device ACP
245 – RENAME.EXE
File rename utility
246 – REPLY.EXE
Message broadcasting facility
247 – REQUEST.EXE
Operator request facility
248 – RIGHTSLIST.DAT
System rights database that contains ACL identifiers for users
249 – RMSREC$SERVER.EXE
RMS Journaling detached recovery server
250 – ROUTE.EFI
This file is included in the latest system build, but a description of the file is not available.
251 – RTPAD.EXE
Remote terminal command interface
252 – RUNDET.EXE
Facility that runs detached images
253 – RUNOFF.EXE
DIGITAL Standard Runoff text formatting utility
254 – SA*_STARTUP.COM
Startup procedures used when booting the OpenVMS Alpha kit CD-ROM
to install OpenVMS Alpha
255 – SA*_STARTUP_MESSAGES.COM
Startup messages used when booting the OpenVMS Alpha kit CD-ROM
to install OpenVMS Alpha
256 – SANCP.EXE
This file is included in the latest system build, but a description of the file is not available.
257 – SAS$UTIL.EXE
This file is included in the latest system build, but a description of the file is not available.
258 – SCACP.EXE
Cluster utility to manage operation of cluster ports (PEA0
initially)
259 – SDA.EXE
System Dump Analyzer utility
260 – SDA_DEBUG.EXE
SDA image replacement file used when debugging user-written
System Dump Analyzer (SDA) extensions
261 – SEARCH.EXE
File search utility
262 – SECURITY_SERVER.EXE
Security Server image
263 – SET.EXE
SET command processor
264 – SETAUDIT.EXE
SET AUDIT command processor
265 – SETBAUD.EFI
This file is included in the latest system build, but a description of the file is not available.
266 – SETFILENOMOVE.COM
Command procedure to prevent files from being moved during
rolling upgrade
267 – SETFILENOSHELV.COM
System management command file used to set the NOSHELVE attribute
on all files on the system disk
268 – SETFILENOSHELV.EXE
System management image used to set the NOSHELVE attribute on all
files on the system disk
269 – SETP0.EXE
SET MESSAGE command processor
270 – SETPREFER.EXE
Image for SET PREFER command
271 – SETRIGHTS.EXE
SET RIGHTS_LIST command processor
272 – SETSHOSECUR.EXE
SET SECURITY and SHOW SECURITY image
273 – SETSHOSERVER.EXE
Set and Show Server Dispatch image
274 – SETSHOSHADOW.EXE
A utility program that provides an interface to various
SET and SHOW SHADOW commands. It also is called by the
ANALYZE/DISK_STRUCTURE/SHADOW command to do the compare
operation.
275 – SETSHOWPATH.EXE
This file is included in the latest system build, but a description of the file is not available.
276 – SETWATCH.EXE
Command used by system security utilities
277 – SHADOW_SERVER.EXE
Host-based shadowing server process image
278 – SHOW.EXE
SHOW command processor
279 – SHUTDOWN.COM
System shutdown command procedure
280 – SHWCLSTR.EXE
SHOW CLUSTER command
281 – SMGBLDTRM.EXE
Compiler for termtable definition file
282 – SMGMAPTRM.EXE
Termtable global section, run at system startup
283 – SMGTERMS.TXT
ASCII source file for HP terminal definitions
284 – SMISERVER.EXE
System management server image
285 – SMPUTIL.EXE
Multiprocessing utility
286 – SORTMERGE.EXE
SORT/MERGE commands
287 – SRM_CHECK.EXE
Application that assists in locating illegal
lock sequences in a binary image
288 – STACONFIG.EXE
HSC system disk configurator image
289 – STARTUP.COM
System startup driver
290 – STARTUP_NET.NSH
This file is included in the latest system build, but a description of the file is not available.
291 – STOPREM.EXE
Stop REMACP utility
292 – SUBMIT.EXE
Print and batch job submission utility
293 – SUMSLP.EXE
Source file editor
294 – SWAPFILE.SYS
System swap file
295 – SYS$BASE_IMAGE.MAP
Map file of base executive image
296 – SYS$CONFIG.DAT
System device configuration file
297 – SYS$DAYLIGHT_SAVING.EXE
Image file that adjusts the OpenVMS system clock when daylight
savings time begins and ends. The image also defines the logical
SYS$DST_DELTA_TIME to a 100-nanosecond offset to the next time
change related to daylight savings time. The offset is used by
the job controller to schedule the next run of the image.
298 – SYS$DUMP_PRIORITY.DAT
User-written, site-specific list of processes to be written early
in a selective system dump
299 – SYS$NET_SERVICES_SHUTDOWN.COM
Runs the shutdown procedure for network services
300 – SYS$POWER_MONITOR_0C.EXE
Image file that monitors the status of H7263 power
regulators on AlphaServer 8400 systems
301 – SYS$READ_TIME_ZONE_RULE.EXE
Image file that ensures the timezone rule is accurate for the
current year. This image uses the timezone file specified in
the value of the SYS$LOCALTIME logical to define the
SYS$TIMEZONE_RULE logical.
302 – SYS$SETBOOT.EXE
This file is included in the latest system build, but a description of the file is not available.
303 – SYS$SMHANDLER.COM
Command file that starts the main server management image,
SYS$SMHANDLER.EXE
304 – SYS$SMHANDLER.EXE
Generic system management event handler process. When a
system management event occurs, such as redundant power supply
failure or redundant fan failure, this process broadcasts OPCOM
error messages and writes errors to SYS$MANAGER:SYS$SMHANDLER.LOG.
305 – SYS$SMHANDLER_SLAVE_2308.EXE
Image file that is activated automatically as a shared image by
SYS$SMHANDLER.EXE to handle GS80/GS160/GS320-specific system
management events
306 – SYS$SMHANDLER_SLAVE_2608.EXE
Image file that is activated automatically as a shared image by
SYS$SMHANDLER.EXE to handle DS15/DS25/ES45-specific system
management events
307 – SYS$USER_CONFIG.DAT
User and third-party device configuration file
308 – SYSBOOT.EXE
System bootstrap program, which allows access to the system disk
309 – SYSDUMP.DMP
System dump file
310 – SYSGEN.EXE
System Generation utility
311 – SYSINIT.EXE
Operating system initialization image
312 – SYSMAN.EXE
System Management utility
313 – SYSUAF.DAT
System user authorization file
314 – SYSUAF.TEMPLATE
Unmodified copy of SYSUAF.DAT
315 – TCPIPV4.EFI
This file is included in the latest system build, but a description of the file is not available.
316 – TDF$SET_TIMEZONE.EXE
A program that translates the system logical SYS$TIMEZONE_RULE,
expecting to find a POSIX-compliant timezone rule, uses that
rule to compute the current local timezone offset from UTC,
and stores that offset in the executive image
317 – TECO32_TV.EXE
Translated image for TECO editor
318 – TECO32_TV_AV.EXE
This file is included in the latest system build, but a description of the file is not available.
319 – TERMTABLE.EXE
Binary terminal definitions file
320 – TERMTABLE.TXT
Terminal definitions source file
321 – TFF$MASTER.DAT
Character conversion tables used by the Terminal Fallback driver
322 – TFU.EXE
Terminal Fallback facility
323 – TNT$EXCLUDED_SYMBIONTS.DAT
Unsupported symbionts for the OpenVMS Management Station server
324 – TNT$HELPER.EXE
OpenVMS Management Station server executable which
performs low level non-interruptable device operations
325 – TNT$SERVER.EXE
OpenVMS Management Station server executable
326 – TNT$UTILITY.EXE
Controls the OpenVMS Management Station server
327 – TPSERV.EXE
DECdtm server
328 – TPU.EXE
DECTPU text processing utility
329 – TYPE.EXE
Type utility
330 – UNIDATA2.DAT
Unicode upcase table
331 – UNLOCK.EXE
File unlock utility
332 – USB$UCM_CLIENT.EXE
Client code to talk to the USB configuration manager process
333 – USB$UCM_DEVICES.DAT
Contains entries that describe a keyboard and a mouse that will work any place on the USB bus. The UCM Server process will create a node-specific copy of this file. The copy in SYS$COMMON:[SYSEXE] should not be deleted. These files should never be edited by a user.
334 – USB$UCM_SERVER.EXE
Server process that manages device configuration. No device can be configured if this is not running.
335 – UTC$CONFIGURE_TDF.EXE
Program used by two command procedures to set or show the time differential factor (TDF)
336 – VERIFY.EXE
ANALYZE/DISK_STRUCTURE image
337 – VMOUNT.EXE
Volume mount utility
338 – VMS$CREATE_SYSDIRS.COM
Command procedure used in kitting, installation, and upgrade
339 – VMS$PDF_CREATE_SYSDIRS.COM
Procedure to create or remove system directories; replaces
VMS$CREATE_SYSDIRS.COM, but does not provide identical functionality.
340 – VMSHELP.EXE
Help utility
341 – VMS_BCFG.EFI
This file is included in the latest system build, but a description of the file is not available.
342 – VMS_LOADER.EFI
This file is included in the latest system build, but a description of the file is not available.
343 – VMS_SET.EFI
This file is included in the latest system build, but a description of the file is not available.
344 – VMS_SHOW.EFI
This file is included in the latest system build, but a description of the file is not available.
345 – VMS_SPCFG.EFI
This file is included in the latest system build, but a description of the file is not available.
346 – VPM.EXE
Cluster monitor
347 – VPM_SERVER.EXE
Processes requests through TCP/IP for the Monitor utility
348 – WBM.EXE
Write BitMap utility routines
349 – WP.EXE
Watchpoint utility command interpreter
350 – WRITEBOOT.EXE
System volume bootblock writing utility
351 – WWPPS.EXE
Utility to print a text file to the PostScript printer
352 – XGCP.EXE
DECdtm XA Gateway Command Processor Utility
353 – XMKERBEROS.EXE
Kerberos DECWindows interface image
354 – ZIC.EXE
Time zone compiler used for creating time zone binary files from
time zone source files