SCACP>SHOW IP_INTERFACE/ALL
The following is a snapshot of the output for SHOW IP_
INTERFACE/ALL command.
SCACP>SHOW IP_INTERFACE/COUNTERS
Displays IP interface counters.
IP or LAN Device Error Data describes the IP/LAN device error
data.
Table 2 IP or LAN Device Error Data
Data Description
Bad SCSSYSTEM ID Received a packet with the wrong SCSSYSTEM ID
in it.
MC Msgs Directed Number of multicast packets directed to the
to TR Layer NISCA Transport layer.
Short CC Messages Number of packets received were short to
Received contain a NISCA channel control header.
Short DX Messages Number of packets received were short to
Received contain a NISCA DX header for a LAN device.
CH Allocation Number of times the system failed to allocate
Failures memory for use as a channel structure in
response to a packet received by this LAN
device.
VC Allocation Number of times the system failed to allocate
Failures memory for use as a VC structure in response
to a packet received by this LAN or IP device.
Wrong Port Number of packets addressed to the wrong NISCA
address (Invalid cluster group number).
Port Disabled Number of packets discarded because the LAN or
IP device was disabled.
H/W Transmit Number of local hardware transmit errors.
Errors
Hello Transmit Number of transmit errors during HELLOs.
Errors
Last Transmit Reason for last transmit error.
Error Reason
Time of Last Time of last transmit error:date and time.
Transmit Error
For IP interfaces, the error count can increase for the following
reasons. These errors will be displayed with any of the error
codes.
o The interface is unable to send data (SS$_SUSPENDED)
o Link is disconnected (SS$_LINKDISCON)