NET$MGMT_HELP.HLB  —  hdlc  logical
   The HDLC Link Logical Station entity controls the characteristics of an
   HDLC Logical Station. There is one station for each remote termination of
   a line associated with the HDLC link.  The link name is the link entity
   within the HDLC module and the logical station name refers to the logical
   station.

1  –  Counters

     DATA OCTETS RECEIVED

         Total number of octets received in the I-field of I-frames and
 	UI-frames.  This total excludes protocol ID information in UI-frames
 	and frame retransmissions.

     DATA OCTETS SENT

         Total number of octets sent in the I-field of I-frames and
         UI-frames.  This total excludes protocol ID information in
         UI-frames and frame retransmissions.

     DATA PDUS RECEIVED

         Total number of I-frames and UID-frames received. This number does
         not include frames that had to be retransmitted.

     DATA PDUS SENT

         Total number of I-frames and UID-frames sent. This number does not
 	include frames that had to be retransmitted.

     FRMRS GENERATED

         Number of FRMRs frame rejects sent.

     FRMRS RECEIVED

         Number of FRMRs frame rejects received.

     INVALID MODE COMMANDS

         Number of command frames SABME, SABM, SNRME, SNRM,SARM, and SIM
 	received that are not applicable to this station.

     NEGOTIATION FAILURES

         Number of times that the XID negotiation with the remote station has
 	failed.

     POLLS RECEIVED

         Number of frames received with the poll bit set.

     REJS RECEIVED

         Number of REJ frames rejects received.

     REJS SENT

         Number of REJ frames rejects sent.

     RNRS RECEIVED

         Number of RNR receive not ready supervisory frames received from the
 	remote station.

     RNRS SENT

         Number of RNR receive not ready supervisory frames transmitted.

     TIMES ACKNOWLEDGE TIMER EXPIRED

         Number of times that the acknowledge timer has expired.

     TIMES STATION HALTED

         Number of times the station halt event has occurred.

     TIMES STATION INITIALIZING

         Number of times the station initialized event has occurred.

     TIMES STATION INOPERATIVE

         Number of times the entity's status attribute state became
 	inoperative.

     TIMES STATION MAINTENANCE

         Number of times the entity's status attribute state became
 	maintenance.

     TIMES STATION RESETTING

         Number of times that the station reset event has occurred.

     TIMES STATION RUNNING

         Number of times that the station running event has occurred.

     TIMES STATION SETUP FAILED

         Number of times the station setup failure event has occurred.

     UNKNOWN UI PDUS RECEIVED

         Number of UI-frames the local station received whose protocol ID
         does not match that of any open port.

     XIDS RECEIVED

         Number of XID identification command or response frames received.

2  –  status

     COMMAND ADDRESS

         Address the local station uses when sending command frames to the
  	remote station.

     MAINTENANCE MODE

         Whether the station is in maintenance mode. When set to true, the
 	station will be used exclusively for maintenance operations. When
         set to false, the station operates in normal fashion.

 	The limit command sets the value of this attribute to true, and
 	the unlimit to false.

     PROTOCOL STATE

         State of the data link protocol.

         ERROR -        A protocol error occurred. For instance, the logical
                        station received an invalid frame.

         HALTED -       The protocol could not start. For example, there is
                        no client.

         INITIALIZING - The protocol is being initialized.

         INOPERATIVE -  The protocol cannot be started because no contact has
 	               been established with the remote station.

         MAINTENANCE -  The logical station is in maintenance mode.

         RESETTING -    The protocol is resetting after an error.

         RUNNING -      The protocol is running and capable of exchanging
                        frames with the remote station.

     REMOTE VERSION

         Version number of the HDLC protocol that the remote station is using.
 	This is received as part of an XID message from the remote station.

     STATE

         State of the logical station.

         OFF - The logical station is off because of a disable command.

         ON  - The logical station is on because of an enable command.
Close Help