Use the CLEAR MODULE X25-ACCESS command to remove from the volatile
 database network names and parameters used by the host node to
 access a specified X25 network or networks through a multi-host
 node.  The multi-host node serving as a gateway to the specified
 X25 network must be a VMS node with VAX PSI multi-host software
 installed.  Use the PURGE MODULE X25-ACCESS command to remove these
 same network names and parameters from the permanent database.

      CLEAR   MODULE X25-ACCESS     NETWORK network-name     ACCOUNT
                                    KNOWN NETWORKS           ALL
                                                             PASSWORD
                                                             USER

 All underscores found in parameters must be replaced with spaces
 when parameters are used in NCP commands.

1  –  ACCOUNT

 removes the account from the data base for the specified network
 or all known networks.

2  –  ALL

 Removes all parameters for the specified network or all known
 networks in the data base.

3  –  KNOWN NETWORKS

 Identifies all known networks

4  –  NETWORK network-name

 Identifies the network whose parameters are to be removed from
 the data base.

5  –  PASSWORD

 Removes the password from the data base for the specified network
 or all known networks.

6  –  USER

 Removes the user identification from the data base for the specified
 network or all known networks.