NCLHELP.HLB  —  show  x25_access, template  Characteristics
 o  call data

    Default: No call user data       Value: Hex string

    Call user data to be sent in the call.

 o  calling address extension

    Default: No NSAP address        Value: NSAP address

    Calling Network Service Access Point (NSAP) address is to be
    passed to a higher-level entity within the called DTE. A null
    address indicates that this facility is not included in the
    outgoing call.

 o  charging information

    Default: False              Value: True or false

    Specifies whether charging information is requested for this
    call.

 o  destination dte address

    Default: No DTE address      Value: DTE address

    Address of the remote DTE, including the remote subaddress (if
    any), to which the call is directed.

 o  dte class

    Default: No DTE class name     Value: Class name

    Name of the DTE class to be used for the call.

 o  end-to-end delay

    Default: [0..0]        Value: Range (see description)

    Lower and upper bounds of the acceptable end-to-end delay for the
    call. A zero value for either bound indicates that no range is
    included in the outgoing call.

 o  expedited data

    Default: Not specified       Value: See description

    Specifies whether expedited data is requested for the call.

    do not use      Expedited data is not in use.

    not specified   Expedited data is not requested.

    use             Expedited data is in use.

 o  fast select

    Default: Not specified        Value: See description

    Specifies whether fast select is requested for the call.

    fast select      Fast select is in use.

    no fast select   Fast select is not in use.

    not specified    Fast select is not requested.

    with response    Fast select with response is in use.

 o  local facilities

    Default: No facilities            Value: Hex string

    Non-CCITT facilities that are available from the local PSDN.
    The string is placed in the outgoing call request packet without
    modification. The contents and interpretation of this string are
    implementation-dependent.

 o  local subaddress

    Default: No DTE address        Value: DTE address

    Local subaddress to be appended to the calling DTE address in the
    call.

 o  network user identity

    Default: No network user identity    Value: Hex string

    Network user identity to be included in the call packet. The
    format of the network user identity is specified by the PSDN
    administration.

 o  nsap mapping

    Default: False                  Value: True or false

    Specifies whether an x25 access reachable address entity is used
    to map the supplied NSAP address to a destination DTE class/DTE
    address pair.

 o  packet size

    Default: Supplied by profile     Value: 0-4096

    Packet size, in octets, for transmitted and received data
    packets. The value must be a power of 2 in the range 0 to 4096.
    The value zero indicates that no packet size is included in the
    outgoing call.

 o  quality of service

    Default: No data                Value: Hex string

    Quality of service data. The contents and interpretation of this
    string are implementation-dependent.

 o  reverse charging

    Default: False                   Value: True or false

    Specifies whether reverse charging is requested for the call.

 o  rpoa sequence

    Default: No DTE address         Value: Set of DTE addresses

    Private Operating Agency sequence of transit networks to be used
    in setting up the call. Format the values to specify a set of
    DTE addresses. Each DTE address is four digits long. An empty set
    indicates that no sequence is included in the outgoing call.

 o  selected group

    Default: No group name           Value: Group name

    Name of the x25 protocol group entity that represents the CUG
    selected for the call. The index for group is included in the
    facility field of the call request packet.

 o  target address extension

    Default: No NSAP address        Value: NSAP address

    Called NSAP address to be sent to the called DTE should be
    supplied by a higher-level entity in the calling DTE. A null
    address indicates that this facility is not required.

 o  throughput class request

    Default: [0..0]        Value: Range (see the following
                           description)

    Minimum acceptable throughput class (the lower bound of the
    range) and the target throughput class (the upper bound of the
    range) for a call. The only legal range values are as follows:

    0              2400
    75             4800
    150            9600
    300            19200
    600            48000
    1200

    The range 0-0 indicates that no throughput class is included in
    the outgoing call.

 o  transit delay selection

    Default: 0                     Value: Integer

    Desired transit delay. A zero value indicates
    that no value is included in the outgoing call.

 o  window size

    Default: Supplied by profile     Value: 0-127

    Window size for transmitted and received data packets. A zero
    value indicates that no window size is included in the outgoing
    call.
Close Help