o data link port
Support: All
Name of the data link port used for this circuit. Not supported
on DA circuits.
o data link sdu size
Support: All
Maximum size, in octets, of a Data Link SDU for this circuit.
This includes the Network layer header, but excludes the Data
Link layer header. The value of this status is the lesser of the
value of the characteristic manual data link sdu size and any
limit imposed by the Data Link layer.
o LAN L1 id
Support: L1,L2
LAN ID allocated by the LAN level 1 designated router. This
attribute is supported only if the circuit's characteristic type
is csma-cd.
o LAN L2 id
Support: L2
LAN ID allocated by the LAN level 2 designated router. This
attribute is supported only if the circuit's characteristic type
is csma-cd.
o L1 designated router
Support: L1,L2
ID of the DECnet-Plus level 1 designated router on this circuit.
This attribute is supported only if the circuit's characteristic
type is csma-cd. If this node does not participate in the router
election process, the value returned is 00-00-00-00-00-00.
o L2 designated router
Support: L2
ID of the DECnet-Plus level 2 designated router on this circuit.
This attribute is supported only if the circuit's characteristic
type is csma-cd. If this node does not participate in the router
election process, the value returned is 00-00-00-00-00-00.
o phaseiv designated router
Support: L1,L2
ID of the Phase IV designated router on this circuit. This
attribute is supported only if the circuit's characteristic
type is csma-cd. If this node does not participate in the router
election process, the value returned is 00-00-00-00-00-00.
o point-to-point id
Support: L1,L2
ID allocated to the circuit during its initialization. This
attribute is supported only if the circuit's characteristic type
is hdlc, ddcmp, or x25 static.
o state
State of the routing circuit entity.
Support:
All
off The circuit is disabled.
on The circuit is enabled.
o uid
Entity's unique identifier, which is generated when the entity is
created.