NCLHELP.HLB  —  load  mop

1  –  circuit

    Initiates a downline load from the system specified by node-id to
    a target system specified by the arguments or by a client.
    Circuit-name specifies the name of the circuit over which the load
    operation is to occur.

    load  [node node-id] mop circuit circuit-name -
          address lan-address, -
          system image filespec [,optional arguments...]

    The Address and System Image arguments are required for LAN circuits.
    If those arguments are not supplied in the command, then the Client
    argument must be specified so the required information can be
    obtained from the MOP Client database.

    load  [node node-id] mop circuit circuit-name -
          client client-name [,optional arguments...]

    Optional arguments for the load mop circuit command are:  management
    image, script file, secondary loader, tertiary loader, and
    verification.

1.1  –  address

    Address is the LAN address of the remote system on that circuit.
    The Address and System Image arguments are required for LAN
    circuits.  If you do not supply this information in the command,
    you must specify a Client in the MOP Client database which can
    provide that information.

    load  [node node-id] mop circuit circuit-name -
          address lan-address, -
          system image filespec [,optional arguments...]

    Optional arguments for the load mop circuit command are:
    management image, script file, secondary loader, tertiary
    loader, and verification.

    Examples:

    load mop circ csmacd-1 address 08-00-2B-13-FD-0A, -
          system image SH1601ENG.SYS

    load mop circ fddi-1 address 08-00-2b-0f-a8-dc, -
          system image "@net$niscs_laa($1$dua0:<sys16.>)"

1.2  –  client

    Client-name is the client entity to be used for this load
    operation.  The default information for this client is obtained
    from the MOP Client database.  Address and System Image
    information for this client must be present in the database if
    it is not provided on the command line.

    load  [node node-id] mop circuit circuit-name -
          client client-name [,optional arguments...]

    Optional arguments for the load mop circuit command are:
    management image, script file, secondary loader, tertiary
    loader, and verification.

    Example:

    load mop circuit csmacd-1 client lamchp

1.3  –  management_image

    Management Image is an optional argument which can be used if
    a file containing initialization data for the node is required by
    the target system.  Data is encoded in a product-specific format.

    Address and System Image information is required for the load mop
    circuit command; that information must be obtainable either from
    the command line or from the MOP Client database.

    To override any default Management Image information for this
    Client in the MOP Client database:

    load  [node node-id] mop circuit circuit-name -
          client client-name, -
          management image filespec

    Example:

    load mop circuit csmacd-1 client lamchp, -
          management image MGMT.IMAGE

1.4  –  script_file

    The optional Script File argument specifies a file containing
    initialization data for the node; data is encoded as a sequence
    of network management commands in CMIP form. This argument may be
    required by the target system.

    Address and System Image information is required for the load mop
    circuit command; that information must be obtainable either from
    the command line or from the MOP Client database.

    To override any default Script File information for this
    Client in the MOP Client database:

    load  [node node-id] mop circuit circuit-name -
          client client-name, -
          script file filespec

    Example:

    load mop circuit csmacd-1 client lamchp, script file SCRIPT.FILE

1.5  –  secondary_loader

    The optional Secondary Loader argument specifies the name of a
    second file containing the software to be downline loaded. This
    argument may be required by the target system.

    Address and System Image information is required for the load mop
    circuit command; that information must be obtainable either from
    the command line or from the MOP Client database.

    To override any default Secondary Loader information for this
    Client in the MOP Client database:

    load  [node node-id] mop circuit circuit-name -
          client client-name, -
          secondary loader filespec

    Example:

    load mop circuit csmacd-1 client lamchp, -
          secondary loader sys$system:secondary_vmb.exe

1.6  –  system_image

    System Image specifies the file containing the system image to be
    downline loaded. The System Image and Address arguments are
    required for LAN circuits.  If you do not supply this information
    in the command, you must specify a Client in the MOP Client
    database which can provide that information.

    load  [node node-id] mop circuit circuit-name -
          system image filespec, -
          address lan-address [,optional arguments...]

    Optional arguments for the load mop circuit command are:
    management image, script file, secondary loader, tertiary
    loader, and verification.

    Examples:

    load mop circ csmacd-1 system image SH1601ENG.SYS, -
          address 08-00-2B-13-FD-0A

    load mop circ fddi-1 -
          system image "@net$niscs_laa($1$dua0:<sys16.>)", -
          address 08-00-2b-0f-a8-dc

1.7  –  tertiary_loader

    The optional Tertiary Loader argument specifies the name of a
    third file containing the software to be downline loaded. This
    argument may be required by the target system.

    Address and System Image information is required for the load
    mop circuit command; that information must be obtainable either
    from the command line or from the MOP Client database.

    To override any default Tertiary Loader information for this
    Client in the MOP Client database:

    load  [node node-id] mop circuit circuit-name -
          client client-name, -
          tertiary loader filespec

    Example:

    load mop circuit csmacd-1 client lamchp, -
          tertiary loader sys$system:tertiary_vmb.exe

1.8  –  verification

    The optional Verification argument specifies the string that must
    match a verification code at the receiving system in order for the
    load to be performed.  The value must be an even number of digits
    from 2 to 16.  The default verification is '0000000000000000'H.

    Address and System Image information is required for the load mop
    circuit command; that information must be obtainable either from
    the    command line or from the MOP Client database.

    To override any default Verification information for this Client
    in the MOP Client database:

    load  [node node-id] mop circuit circuit-name -
          client client-name, -
          verification hex-string

    Example:

    load mop circuit csmacd-1 client lamchp, -
          verification %x0000000000000011

1.9  –  Exception Messages

 o  data link error

    An error was reported by the Data Link layer on the load command.

 o  unrecognized client

    There is no client with the specified identification.

 o  unrecognized circuit

    There is no circuit with the specified identification.

 o  required argument omitted

    Both the Address and System Image arguments are required.  If
    they are not present in the command line, then a Client must be
    specified which can provide that information.

 o  entity class not supported (OpenVMS)

    MOP is not registered with EMAA.  The NET$MOP process is
    probably not started.  For instructions on how to restart the
    MOP process, refer to HELP NETWORK_MANAGEMENT MOP.

2  –  client

    Initiates a downline load from the system specified by node-id to
    a target system specified by the arguments or by a client.
    Client-name is the client entity to be used for this load operation.
    The default information for this client is obtained from the MOP
    Client database.

    load  [node node-id] mop client client-name [optional arguments...]

    Circuit information for this client must be present in the database
    if it is not provided on the command line.  The Address and System
    Image arguments are also required for LAN circuits.  If those
    arguments are not supplied in the command, then they must be
    obtainable from the MOP Client database.

    Optional arguments for the load mop client command are:  management
    image, script file, secondary loader, tertiary loader, and
    verification.

2.1  –  address

    Address is the LAN address of the remote system on that circuit.
    The Address and System Image arguments are required for LAN
    circuits.  If you do not supply this information in the command,
    this information must be present for the specified client in the
    MOP Client database.  The Circuit argument must also either be
    provided on the command line or obtainable from the MOP Client
    database.

    load  [node node-id] mop client client-name -
          address lan-address [,optional arguments...]

    Optional arguments for the load mop client command are:
    management image, script file, secondary loader, tertiary
    loader, and verification.

    Example:

    load mop client lamchp -      ! Client provides default Circuit
       address 08-00-2B-13-FD-0A  ! and System Image

2.2  –  circuit

    Circuit information is required either on the command line or
    from the MOP Client database for the specified client.
    Circuit-name specifies the circuit over which the load
    operation is to be performed.

    The Address and System Image arguments are also required for
    LAN circuits.  If you do not supply this information in the
    command, this information must be present for the specified
    client in the MOP Client database.

    load  [node node-id] mop client client-name -
          circuit circuit-name [,optional arguments...]

    Optional arguments for the load mop client command are:
    management image, script file, secondary loader, tertiary
    loader, and verification.

    Example:

    load mop client lamchp -  ! Client provides default Address
         circuit csmacd-1     ! and System Image

2.3  –  management_image

    Management Image is an optional argument which can be used if
    a file containing initialization data for the node is required by
    the target system.  Data is encoded in a product-specific format.

    Circuit, Address, and System Image information is required for
    the load mop client command; that information must be obtainable
    either from the command line or from the MOP Client database.

    To override any default Management Image information for this
    Client in the MOP Client database:

    load  [node node-id] mop client client-name -
          management image filespec [,optional arguments...]

    Example:

    load mop client lamchp -         ! Client gives default Address,
         management image MGMT.IMAGE ! System Image and Circuit

2.4  –  script_file

    The optional Script File argument specifies a file containing
    initialization data for the node; data is encoded as a
    sequence of network management commands in CMIP form. This
    argument may be required by the target system.

    Circuit, Address, and System Image information is required
    for the load mop client command; that information must be
    obtainable either from the command line or from the MOP Client
    database.

    To override any default Script File information for this
    Client in the MOP Client database:

    load  [node node-id] mop client client-name -
          script file filespec

    Example:

    load mop client lamchp -        ! Client gives default Address,
         script file SCRIPT.FILE    ! Circuit, and System Image

2.5  –  secondary_loader

    The optional Secondary Loader argument specifies the name of a
    second file containing the software to be downline loaded. This
    argument may be required by the target system.

    Circuit, Address, and System Image information is required for
    the load mop client command; that information must be obtainable
    either from the command line or from the MOP Client database.

    To override any default Secondary Loader information for this
    Client in the MOP Client database:

    load  [node node-id] mop client client-name -
          secondary loader filespec [,optional arguments...]

    Example:

    load mop client lamchp -  ! Client gives Addr, Circ and Sys Image
         secondary loader sys$system:secondary_vmb.exe

2.6  –  system_image

    System Image specifies the file containing the system image to be
    downline loaded.  The System Image and Address arguments are
    required for LAN circuits.  If you do not supply this information
    in the command, you must specify a Client in the MOP Client
    database which can provide that information.  The Circuit
    argument must also be specified on the command line if that
    information is not obtainable from the MOP Client database.

    load  [node node-id] mop client client-name -
          system image filespec [,optional arguments...]

    Optional arguments for the load mop client command are:
    management image, script file, secondary loader, tertiary
    loader, and verification.

    Example:

    load mop client lamchp -         ! Client gives default Address
         system image SH1601ENG.SYS  ! and Circuit

2.7  –  tertiary_loader

    The optional Tertiary Loader argument specifies the name of a
    third file containing the software to be downline loaded. This
    argument may be required by the target system.

    Circuit, Address, and System Image information is required for
    the load mop client command; that information must be obtainable
    either from the command line or from the MOP Client database.

    To override any default Tertiary Loader information for this
    Client in the MOP Client database:

    load  [node node-id] mop client client-name -
          tertiary loader filespec

    Example:

    load mop client lamchp - ! Client gives Addr, Circ and Sys Image
          tertiary loader sys$system:tertiary_vmb.exe

2.8  –  verification

    The optional Verification argument specifies the string that must
    match a verification code at the receiving system in order for the
    load to be performed.  The value must be an even number of digits
    from 2 to 16.  The default verification is '0000000000000000'H.

    Circuit, Address, and System Image information is required for
    the load mop client command; that information must be obtainable
    either from the command line or from the MOP Client database.

    To override any default Verification information for this Client
    in the MOP Client database:

    load  [node node-id] mop client client-name -
          verification hex-string

    Example:

    load mop client lamchp -          ! Client gives default Address,
      verification %x0000000000000011 ! Circuit and System Image

2.9  –  Exception Messages

 o  data link error

    An error was reported by the Data Link layer on the load command.

 o  unrecognized client

    There is no client with the specified identification.

 o  unrecognized circuit

    There is no circuit with the specified identification.

 o  required argument omitted

    The Address and System Image arguments are required for LAN
    circuits.  If they are not present in the command line, then
    the MOP Client database entry must provide that information.
    Circuit information must also be provided on the command
    line or it must be obtainable from the specified MOP Client
    entry.

 o  entity class not supported (OpenVMS)

    MOP is not registered with EMAA.  The NET$MOP process is
    probably not started.  For instructions on how to restart
    the MOP process, refer to HELP NETWORK_MANAGEMENT MOP.
Close Help