HELPLIB.HLB  —  RTL Routines, SMG$  SMG$READ_VERIFY, Arguments
 keyboard-id

    OpenVMS usage:identifier
    type:         longword (unsigned)
    access:       read only
    mechanism:    by reference

    Keyboard identifier. The keyboard-id argument is the address of
    an unsigned longword containing the identifier of the virtual
    keyboard from which to read.

    The virtual keyboard is created by calling the SMG$CREATE_
    VIRTUAL_KEYBOARD routine.

 resultant-string

    OpenVMS usage:char_string
    type:         character string
    access:       write only
    mechanism:    by descriptor

    Output string into which SMG$READ_VERIFY writes the characters
    that are read. The resultant-string argument is the address of a
    descriptor pointing to this output string.

 initial-string

    OpenVMS usage:char_string
    type:         character string
    access:       read only
    mechanism:    by descriptor

    Input string that contains the initial characters of the field.
    The initial-string argument is the address of a descriptor
    pointing to the input string.

 picture-string

    OpenVMS usage:char_string
    type:         character string
    access:       read only
    mechanism:    by descriptor

    String that contains a picture of what the field is to look
    like. The picture-string argument is the address of a descriptor
    pointing to the picture string.

    For more information on the legal values for the picture string,
    see the terminal driver section of the OpenVMS I/O User's
    Reference Manual.

 fill-character

    OpenVMS usage:char_string
    type:         character string
    access:       read only
    mechanism:    by descriptor

    Fill character. The fill-character argument is the address of a
    descriptor pointing to the string that contains the character to
    be used as a fill character in the initial-string argument.

 clear-character

    OpenVMS usage:char_string
    type:         character string
    access:       read only
    mechanism:    by descriptor

    Clear character. The clear-character argument is the address of
    a descriptor pointing to the string that contains the character
    to be displayed for each occurrence of fill-character in initial-
    string.

 prompt-string

    OpenVMS usage:char_string
    type:         character string
    access:       read only
    mechanism:    by descriptor

    Prompt string. The prompt-string argument is the address of a
    descriptor pointing to the string that SMG$READ_VERIFY uses as
    the prompt for the read operation. This is an optional argument.

 modifiers

    OpenVMS usage:mask_longword
    type:         longword (unsigned)
    access:       read only
    mechanism:    by reference

    Modifiers. The modifiers argument is a longword bit mask that
    specifies optional behavior. The bits defined are the same as
    for the $QIO item-list entry TRM$_MODIFIERS. This is an optional
    argument.

    Valid values for modifiers are as follows:

    TRM$M_TM_AUTO_TAB  Field is full when last character is entered.
    TRM$M_TM_CVTLOW    Converts lowercase characters to uppercase
                       characters.
    TRM$M_TM_NOECHO    Characters entered are not echoed on the
                       screen.
    TRM$M_TM_NOEDIT    Advanced editing is disabled for this read
                       operation.
    TRM$M_TM_NORECALL  Line recall is disabled.
    TRM$M_TM_PURGE     Type-ahead buffer is purged before read is
                       begun.
    TRM$M_TM_R_JUST    Input is right justified.
    TRM$M_TM_          Termination character, if any, is not
    TRMNOECHO          displayed.

    The TRM$ symbols are defined by the $TRMDEF macro/module in
    system symbol libraries supplied by Compaq. See the terminal
    driver section of the OpenVMS I/O User's Reference Manual for
    more information on modifiers for read operations.

 timeout

    OpenVMS usage:longword_signed
    type:         longword (signed)
    access:       read only
    mechanism:    by reference

    Timeout count. The timeout argument is the address of a signed
    longword that contains the timeout value. The timeout argument is
    optional. If timeout is specified, all characters typed in before
    the timeout or before a terminator is entered are returned in
    the buffer. If timeout is omitted, characters are returned in the
    buffer until a terminator is seen.

 placeholder-arg

    OpenVMS usage:unspecified
    type:         unspecified
    access:       read only
    mechanism:    unspecified

    Placeholder argument. The OpenVMS terminal driver ignores this
    argument when performing a read-verify.

 initial-offset

    OpenVMS usage:longword_signed
    type:         longword (signed)
    access:       read only
    mechanism:    by reference

    Input string offset. The initial-offset argument is the address
    of a signed longword that contains the number of characters (from
    the initial-string argument) to output after the prompt before
    waiting for input.

 word-terminator-code

    OpenVMS usage:word_unsigned
    type:         word (unsigned)
    access:       write only
    mechanism:    by reference

    Key terminator code. The word-terminator-code argument is an
    unsigned word into which SMG$READ_VERIFY writes a code indicating
    what character or key terminated the read. Key terminator codes
    are of the form SMG$K_TRM_keyname.

 display-id

    OpenVMS usage:identifier
    type:         longword (unsigned)
    access:       read only
    mechanism:    by reference

    Display identifier. The optional display-id argument is the
    address of an unsigned longword that contains the identifier
    of the virtual display in which the read is to be performed.

    If display-id is specified, SMG$READ_VERIFY begins the read at
    the current virtual cursor position in that virtual display. If
    omitted, the read begins in the current physical cursor position.
    You cannot accept input from an occluded area of the virtual
    display.

    In the case of multiple virtual displays, each virtual display
    has an associated virtual cursor position. At the same time,
    there is a single physical cursor position corresponding to
    the current location of the physical cursor. If the display-id
    argument is specified, the read begins at the current virtual
    cursor position in the specified virtual display. If omitted,
    the read begins in the current physical cursor position. Note
    that the length of the prompt-string, the initial-offset, and the
    string entered is limited to the number of visible columns in the
    display.

 alternate-echo-string

    OpenVMS usage:char_string
    type:         character string
    access:       read only
    mechanism:    by descriptor

    Alternate echo string. The alternate-echo-string argument is a
    string that is printed after the first character is typed during
    the read operation. This is an optional argument.

 alternate-display-id

    OpenVMS usage:identifier
    type:         longword (signed)
    access:       read only
    mechanism:    by reference

    Alternate display identifier. The alternate-display-id is a
    signed longword containing the identifier of the virtual display
    in which the alternate-echo-string argument is to be printed.
    This is an optional argument. If specified, the output begins
    at the current virtual cursor position in that virtual display.
    If omitted, the value of the display-id argument is used as the
    default. If display-id is not specified, the output begins in the
    current physical cursor position.

 rendition-set

    OpenVMS usage:mask_longword
    type:         longword (unsigned)
    access:       read only
    mechanism:    by reference

    Attribute specifier. The optional rendition-set argument is
    the address of a longword bit mask in which each attribute set
    causes the corresponding attribute to be set in the display. The
    following attributes can be specified using the rendition-set
    argument:

    SMG$M_BLINK      Displays blinking characters.
    SMG$M_BOLD       Displays characters in higher-than-normal
                     intensity.
    SMG$M_REVERSE    Displays characters in reverse video; that is,
                     using the opposite of the default rendition of
                     the virtual display.
    SMG$M_UNDERLINE  Displays underlined characters.
    SMG$M_INVISIBLE  Specifies invisible characters; that is, the
                     characters exist in the virtual display but do
                     not appear on the pasteboard.
    SMG$M_USER1      Displays user-defined attributes.
    through
    SMG$M_USER8

    The display-id argument must be specified when you use the
    rendition-set argument.

 rendition-complement

    OpenVMS usage:mask_longword
    type:         longword (unsigned)
    access:       read only
    mechanism:    by reference

    Attribute complement specifier. The optional rendition-
    complement argument is the address of a longword bit mask in
    which each attribute set causes the corresponding attribute to be
    complemented in the display. All attributes that can be specified
    with the rendition-set argument can be complemented with the
    rendition-complement argument. The display-id argument must be
    specified when you use the rendition-complement argument.

    The optional arguments rendition-set and rendition-complement let
    the user control the attributes of the virtual display in which
    the read is done. The rendition-set argument sets certain virtual
    display attributes, while rendition-complement complements
    these attributes. If the same bit is specified in both the
    rendition-set and rendition-complement parameters, rendition-
    set is evaluated first, followed by rendition-complement. By
    using these two parameters together, the user can control each
    virtual display attribute in a single procedure call. On a
    single-attribute basis, the user can cause the transformations
    shown in the following table.

    Set  Complement Action

    0    0          Attribute set to default
    1    0          Attribute on
    0    1          Attribute set to complement of default setting
    1    1          Attribute off

 input-length

    OpenVMS usage:word_unsigned
    type:         word (unsigned)
    access:       write only
    mechanism:    by reference

    Number of characters entered by the user. The input-length
    argument is the address of an unsigned word containing this
    number.
Close Help