ECOAPP MONITOR This command will monitor the statistics of the ecoapp utility. The display will continusly be updated with relevant info: ECOAPP version V2.1 Enter H or ? for help Start time: 8-JUL-2020 09:12:01.15 (load at boot enabled, level 5.00) Uptime: 1 02:47:44.35 State: Inactive Level: 5.00 Total system idle percentage since ECOAPP start: 88% Cpu average: 3.76 5.22 3.87 Cur processes: 1 IOq average: 4.20 6.90 3.88 Cur I/O queue: 0 Sys average: 7.97 12.12 7.75 CPU idle count idle time idle ----------------------------------------------- 0 257257646 0 20:21:11.49 100% 1 203724018 0 17:23:03.55 86% 2 191994732 0 17:50:49.53 88% 3 153309693 0 15:34:28.96 77% 4 243440235 0 20:59:39.65 100% 5 224290571 0 19:56:39.10 95% 6 198999658 0 18:17:45.03 88% 7 173178507 0 15:47:53.65 76% 'idle count' is the number of times that a cpu was suspended due to lack of work. 'idle time' is the total time that a cpu has spent waiting before an interrupt woke it up. During monitoring a couple of keys are recognized which can influence the settings of monitoring: Ctrl-Z, F10, Q: Exit Ctrl-W: Refresh S: Suspend R: Resume Left arrow: Interval down Right arrow: Interval up Up arrow: Level up Down arrow: Level down PageUp: Level up * 10 PageDown: Level down * 10 C: Clear level W: Write level 0-9: Set level to 0-9 H, ?: Help
1 /FULL
/FULL Shows extended info including the average idle time.
2 /INTERVAL
/INTERVAL=n This qualifier specifies the interval in seconds between updates. The default is 1 second.
3 /SMG
/[NO]SMG Allows a pretty formatted display using the VMS Screen Management routines.