DTEHELP.HLB  —  SHOW  DTE
    Displays the current settings of all the configurable
    characteristics of DTEPAD.  Also displays the number of bytes of
    data transmitted and received during the current SET HOST/DTE
    session, and the number of errors detected by the terminal port.

1  –  Examples

    1. DTEPAD> SHOW DTE
         Port TXA1              EIGHT_BIT ECHO
         Flow control           XON/XOFF
         Parity                 NONE
         Transmit Speed         9600
         Receive Speed          9600
         Error action           CONTINUE
         Break character        ]
         Escape character       \
         Command character      @
         Maximum buffers        100
         Read delay             50 milliseconds
         Log file               NONE
         Dialed number          12345678
         Modem type             DF03

         Bytes transmitted      17
         Bytes received         25
         Errors                 0

      This example displays all the current settings of the
      configurable characteristics, the number of bytes transmitted
      and received, and the number of errors detected.
Close Help