/*****************************************************************************/ /* SHA1.C Intended for use with the WebSockets handshake. Apparently not the most efficient implementation but for the small digests associated with WebSockets handshaking will be efficient enough. http://www.packetizer.com/security/sha1/ PolarSSL SHA1 macros would not compile on DECC 6.4 VAX (infinite loop). Copyright (C) 1998, 2009 Paul E. Jones Freeware Public License (FPL) This software is licensed as "freeware." Permission to distribute this software in source and binary forms, including incorporation into other products, is hereby granted without a fee. THIS SOFTWARE IS PROVIDED 'AS IS' AND WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE AUTHOR SHALL NOT BE HELD LIABLE FOR ANY DAMAGES RESULTING FROM THE USE OF THIS SOFTWARE, EITHER DIRECTLY OR INDIRECTLY, INCLUDING, BUT NOT LIMITED TO, LOSS OF DATA OR DATA BEING RENDERED INACCURATE. VERSION HISTORY --------------- 19-APR-2011 MGD non-SSL SHA1 for WebSockets handshake */ /*****************************************************************************/ #define WASD_MODULE "SHA1" #ifdef WASD_VMS_V7 #undef _VMS__V6__SOURCE #define _VMS__V6__SOURCE #undef __VMS_VER #define __VMS_VER 70000000 #undef __CRTL_VER #define __CRTL_VER 70000000 #endif #include /* * sha1.c * * Copyright (C) 1998, 2009 * Paul E. Jones * All Rights Reserved * ***************************************************************************** * $Id: sha1.c 12 2009-06-22 19:34:25Z paulej $ ***************************************************************************** * * Description: * This file implements the Secure Hashing Standard as defined * in FIPS PUB 180-1 published April 17, 1995. * * The Secure Hashing Standard, which uses the Secure Hashing * Algorithm (SHA), produces a 160-bit message digest for a * given data stream. In theory, it is highly improbable that * two messages will produce the same message digest. Therefore, * this algorithm can serve as a means of providing a "fingerprint" * for a message. * * Portability Issues: * SHA-1 is defined in terms of 32-bit "words". This code was * written with the expectation that the processor has at least * a 32-bit machine word size. If the machine word size is larger, * the code should still function properly. One caveat to that * is that the input functions taking characters and character * arrays assume that only 8 bits of information are stored in each * character. * * Caveats: * SHA-1 is designed to work with messages less than 2^64 bits * long. Although SHA-1 allows a message digest to be generated for * messages of any number of bits less than 2^64, this * implementation only works with messages with a length that is a * multiple of the size of an 8-bit character. * */ #include "sha1.h" /* * Define the circular shift macro */ #define SHA1CircularShift(bits,word) \ ((((word) << (bits)) & 0xFFFFFFFF) | \ ((word) >> (32-(bits)))) /* Function prototypes */ void SHA1ProcessMessageBlock(SHA1Context *); void SHA1PadMessage(SHA1Context *); /* * SHA1Reset * * Description: * This function will initialize the SHA1Context in preparation * for computing a new message digest. * * Parameters: * context: [in/out] * The context to reset. * * Returns: * Nothing. * * Comments: * */ void SHA1Reset(SHA1Context *context) { context->Length_Low = 0; context->Length_High = 0; context->Message_Block_Index = 0; context->Message_Digest[0] = 0x67452301; context->Message_Digest[1] = 0xEFCDAB89; context->Message_Digest[2] = 0x98BADCFE; context->Message_Digest[3] = 0x10325476; context->Message_Digest[4] = 0xC3D2E1F0; context->Computed = 0; context->Corrupted = 0; } /* * SHA1Result * * Description: * This function will return the 160-bit message digest into the * Message_Digest array within the SHA1Context provided * * Parameters: * context: [in/out] * The context to use to calculate the SHA-1 hash. * * Returns: * 1 if successful, 0 if it failed. * * Comments: * */ int SHA1Result(SHA1Context *context) { if (context->Corrupted) { return 0; } if (!context->Computed) { SHA1PadMessage(context); context->Computed = 1; } return 1; } /* * SHA1Input * * Description: * This function accepts an array of octets as the next portion of * the message. * * Parameters: * context: [in/out] * The SHA-1 context to update * message_array: [in] * An array of characters representing the next portion of the * message. * length: [in] * The length of the message in message_array * * Returns: * Nothing. * * Comments: * */ void SHA1Input( SHA1Context *context, const unsigned char *message_array, unsigned length) { if (!length) { return; } if (context->Computed || context->Corrupted) { context->Corrupted = 1; return; } while(length-- && !context->Corrupted) { context->Message_Block[context->Message_Block_Index++] = (*message_array & 0xFF); context->Length_Low += 8; /* Force it to 32 bits */ context->Length_Low &= 0xFFFFFFFF; if (context->Length_Low == 0) { context->Length_High++; /* Force it to 32 bits */ context->Length_High &= 0xFFFFFFFF; if (context->Length_High == 0) { /* Message is too long */ context->Corrupted = 1; } } if (context->Message_Block_Index == 64) { SHA1ProcessMessageBlock(context); } message_array++; } } /* * SHA1ProcessMessageBlock * * Description: * This function will process the next 512 bits of the message * stored in the Message_Block array. * * Parameters: * None. * * Returns: * Nothing. * * Comments: * Many of the variable names in the SHAContext, especially the * single character names, were used because those were the names * used in the publication. * * */ void SHA1ProcessMessageBlock(SHA1Context *context) { const unsigned K[] = /* Constants defined in SHA-1 */ { 0x5A827999, 0x6ED9EBA1, 0x8F1BBCDC, 0xCA62C1D6 }; int t; /* Loop counter */ unsigned temp; /* Temporary word value */ unsigned W[80]; /* Word sequence */ unsigned A, B, C, D, E; /* Word buffers */ /* * Initialize the first 16 words in the array W */ for(t = 0; t < 16; t++) { W[t] = ((unsigned) context->Message_Block[t * 4]) << 24; W[t] |= ((unsigned) context->Message_Block[t * 4 + 1]) << 16; W[t] |= ((unsigned) context->Message_Block[t * 4 + 2]) << 8; W[t] |= ((unsigned) context->Message_Block[t * 4 + 3]); } for(t = 16; t < 80; t++) { W[t] = SHA1CircularShift(1,W[t-3] ^ W[t-8] ^ W[t-14] ^ W[t-16]); } A = context->Message_Digest[0]; B = context->Message_Digest[1]; C = context->Message_Digest[2]; D = context->Message_Digest[3]; E = context->Message_Digest[4]; for(t = 0; t < 20; t++) { temp = SHA1CircularShift(5,A) + ((B & C) | ((~B) & D)) + E + W[t] + K[0]; temp &= 0xFFFFFFFF; E = D; D = C; C = SHA1CircularShift(30,B); B = A; A = temp; } for(t = 20; t < 40; t++) { temp = SHA1CircularShift(5,A) + (B ^ C ^ D) + E + W[t] + K[1]; temp &= 0xFFFFFFFF; E = D; D = C; C = SHA1CircularShift(30,B); B = A; A = temp; } for(t = 40; t < 60; t++) { temp = SHA1CircularShift(5,A) + ((B & C) | (B & D) | (C & D)) + E + W[t] + K[2]; temp &= 0xFFFFFFFF; E = D; D = C; C = SHA1CircularShift(30,B); B = A; A = temp; } for(t = 60; t < 80; t++) { temp = SHA1CircularShift(5,A) + (B ^ C ^ D) + E + W[t] + K[3]; temp &= 0xFFFFFFFF; E = D; D = C; C = SHA1CircularShift(30,B); B = A; A = temp; } context->Message_Digest[0] = (context->Message_Digest[0] + A) & 0xFFFFFFFF; context->Message_Digest[1] = (context->Message_Digest[1] + B) & 0xFFFFFFFF; context->Message_Digest[2] = (context->Message_Digest[2] + C) & 0xFFFFFFFF; context->Message_Digest[3] = (context->Message_Digest[3] + D) & 0xFFFFFFFF; context->Message_Digest[4] = (context->Message_Digest[4] + E) & 0xFFFFFFFF; context->Message_Block_Index = 0; } /* * SHA1PadMessage * * Description: * According to the standard, the message must be padded to an even * 512 bits. The first padding bit must be a '1'. The last 64 * bits represent the length of the original message. All bits in * between should be 0. This function will pad the message * according to those rules by filling the Message_Block array * accordingly. It will also call SHA1ProcessMessageBlock() * appropriately. When it returns, it can be assumed that the * message digest has been computed. * * Parameters: * context: [in/out] * The context to pad * * Returns: * Nothing. * * Comments: * */ void SHA1PadMessage(SHA1Context *context) { /* * Check to see if the current message block is too small to hold * the initial padding bits and length. If so, we will pad the * block, process it, and then continue padding into a second * block. */ if (context->Message_Block_Index > 55) { context->Message_Block[context->Message_Block_Index++] = 0x80; while(context->Message_Block_Index < 64) { context->Message_Block[context->Message_Block_Index++] = 0; } SHA1ProcessMessageBlock(context); while(context->Message_Block_Index < 56) { context->Message_Block[context->Message_Block_Index++] = 0; } } else { context->Message_Block[context->Message_Block_Index++] = 0x80; while(context->Message_Block_Index < 56) { context->Message_Block[context->Message_Block_Index++] = 0; } } /* * Store the message length as the last 8 octets */ context->Message_Block[56] = (context->Length_High >> 24) & 0xFF; context->Message_Block[57] = (context->Length_High >> 16) & 0xFF; context->Message_Block[58] = (context->Length_High >> 8) & 0xFF; context->Message_Block[59] = (context->Length_High) & 0xFF; context->Message_Block[60] = (context->Length_Low >> 24) & 0xFF; context->Message_Block[61] = (context->Length_Low >> 16) & 0xFF; context->Message_Block[62] = (context->Length_Low >> 8) & 0xFF; context->Message_Block[63] = (context->Length_Low) & 0xFF; SHA1ProcessMessageBlock(context); } /* * SHA1LitEnd * * Copy into hash buffer converting from big to little endian. * Assumes hash buffer is 20 octets in size. * Added for WASD usage. * */ void SHA1LitEnd (SHA1Context *context, unsigned char *uptr) { int idx; if (context->Computed) { for (idx = 0; idx < 5; idx++) { *uptr++ = (context->Message_Digest[idx] >> 24) & 0xff; *uptr++ = (context->Message_Digest[idx] >> 16) & 0xff; *uptr++ = (context->Message_Digest[idx] >> 8) & 0xff; *uptr++ = context->Message_Digest[idx] & 0xff; } } else memset (uptr, 0, 20); } #if WATCH_MOD #include /* * Define patterns for testing */ #define TESTA "abc" #define TESTB_1 "abcdbcdecdefdefgefghfghighij" #define TESTB_2 "hijkijkljklmklmnlmnomnopnopq" #define TESTB TESTB_1 TESTB_2 #define TESTC "a" /* * Adapted from SHATEST.C programme for WASD usage. */ void SHA1SelfTest () { SHA1Context sha; int i; unsigned char HashLitEnd [20]; /* * Perform test A */ printf("\nTest A: 'abc'\n"); SHA1Reset(&sha); SHA1Input(&sha, (const unsigned char *) TESTA, strlen(TESTA)); if (!SHA1Result(&sha)) { fprintf(stdout, "ERROR-- could not compute message digest\n"); } else { printf("\t"); for(i = 0; i < 5 ; i++) { printf("%X ", sha.Message_Digest[i]); } printf("\n\t"); SHA1LitEnd (&sha, HashLitEnd); for(i = 0; i < 20 ; i++) { printf("%02.02X", HashLitEnd[i]); if (i % 4 == 3) printf(" "); } printf("\n"); printf("Should match:\n"); printf("\tA9993E36 4706816A BA3E2571 7850C26C 9CD0D89D\n"); } /* * Perform test B */ printf("\nTest B:\n"); SHA1Reset(&sha); SHA1Input(&sha, (const unsigned char *) TESTB, strlen(TESTB)); if (!SHA1Result(&sha)) { fprintf(stdout, "ERROR-- could not compute message digest\n"); } else { printf("\t"); for(i = 0; i < 5 ; i++) { printf("%X ", sha.Message_Digest[i]); } printf("\n\t"); SHA1LitEnd (&sha, HashLitEnd); for(i = 0; i < 20 ; i++) { printf("%02.02X", HashLitEnd[i]); if (i % 4 == 3) printf(" "); } printf("\n"); printf("Should match:\n"); printf("\t84983E44 1C3BD26E BAAE4AA1 F95129E5 E54670F1\n"); } /* * Perform test C */ printf("\nTest C: One million 'a' characters\n"); SHA1Reset(&sha); for(i = 1; i <= 1000000; i++) { SHA1Input(&sha, (const unsigned char *) TESTC, 1); } if (!SHA1Result(&sha)) { fprintf(stdout, "ERROR-- could not compute message digest\n"); } else { printf("\t"); for(i = 0; i < 5 ; i++) { printf("%X ", sha.Message_Digest[i]); } printf("\n\t"); SHA1LitEnd (&sha, HashLitEnd); for(i = 0; i < 20 ; i++) { printf("%02.02X", HashLitEnd[i]); if (i % 4 == 3) printf(" "); } printf("\n"); printf("Should match:\n"); printf("\t34AA973C D4C4DAA4 F61EEB2B DBAD2731 6534016F\n"); } } #endif /* WATCH_MOD */ /*****************************************************************************/