1 PRODUCT
PCSI creates, installs, and manages software products. You can
use it to do the following:
o Install and reconfigure software products.
o Remove software products.
o Display information from the software product database, such
as the names of installed products, the names of patches
applied, product dependencies, the names of files provided
by product, and historical information about past operations.
o Locate software product kits.
o Create a software product kit in sequential, compressed, or
reference format.
o List the contents of a software product kit or extract files
from the kit, such as release notes or files you specify.
o Perform other operations such as establishing default
configuration choices offered by a product, copying a product
kit or converting it to a different format, and registering
information about a product in the product database.
o Uninstall the last patch or set of patches applied to a
product.
To use PCSI from the DCL prompt, enter the PRODUCT command, a
subcommand, and any required parameters and optional qualifiers.
For example:
$ PRODUCT INSTALL FORTRAN /VERSION=V7.2-3 /SOURCE=DISK1:[KITS]
This command installs FORTRAN V7.2-3 on your system from a
product kit located in DISK1:[KITS].
2 Parameters
subcommand
Specifies an operation you want PCSI to perform. If you do not
supply a subcommand, the utility prompts you to select one from a
list.
product-name
Specifies the name of the product to which you want to apply
the activity. Some subcommands do not require this parameter.
You can use the asterisk (*) and the percent sign (%) wildcard
characters for all or part of the product-name. You can specify a
list of products separated by commas (,).
The product name is the same as the third component of the
file name of the product kit. For example, the product name
parameter that you would use to refer to a kit named DEC-AXPVMS-
FORTRAN-V0702-3-1.PCSI is FORTRAN. A product name can include an
underscore character (_) but never a hyphen (-). For example,
VMS73_DRIVER is the name of a remedial kit for OpenVMS whose file
name is DEC-AXPVMS-VMS73_DRIVER-V0300-4.PCSI.
2 ANALYZE
3 PDB
Verifies the structural integrity of the product database and,
in some circumstances, performs minor repairs on the files in the
database.
Format
PRODUCT ANALYZE PDB [/qualifiers]
4 Description
The product database refers to an interrelated set of files named
*.PCSI$DATABASE. These files ordinarily reside in SYS$SYSTEM.
When you use this command, PCSI does the following:
o Reads *.PCSI$DATABASE files referenced by the root database
file PCSI$ROOT.PCSI$DATABASE and checks all fields for correct
syntax.
o Automatically performs minor repairs when a known corruption
pattern can be identified and if a repair is feasible.
o Provides instructions for rebuilding the database if an
unrecoverable corruption is found.
The PRODUCT ANALYZE PDB command always reads the
PCSI$ROOT.PCSI$DATABASE file, even if you also select a subset
of the database files for analysis.
4 Parameters
None.
4 Qualifiers
/LOCATION
/LOCATION=device-name:[directory-name]
Specifies the location of the product database files to be
analyzed. Include only a device and directory name. This
qualifier is useful if you copy the product database to a
temporary directory to perform verification and repair on the
copy rather than on the original files.
If you do not use this qualifier, the default location of the
product database files is SYS$SYSDEVICE:[VMS$COMMON.SYSEXE]. If
you omit the device name, PCSI uses your current default device.
If you omit the directory name, PCSI uses your current default
directory.
/PDB_TYPE
/PDB_TYPE=keyword
Specifies that a subset of the product database files is to be
analyzed. By default, all database files referenced by the root
database file PCSI$ROOT.PCSI$DATABASE are analyzed.
Keywords are as follows:
FILE_SYSTEM Selects the PCSI$FILE_SYSTEM.PCSI$DATABASE
file for analysis.
PROCESSOR Selects the PCSI$PROCESSOR.PCSI$DATABASE file
for analysis.
PRODUCT=(product- Selects the product specific database files
name[,...]) for the named products for analysis. Wildcard
characters are permitted in the product name.
ROOT Selects the PCSI$ROOT.PCSI$DATABASE file for
analysis.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
4 Examples
1.$ PRODUCT ANALYZE PDB
Analyzing product database files in DISK$V83SYS:[VMS$COMMON.][SYSEXE]
...scanned PCSI$ROOT.PCSI$DATABASE;1
...scanned PCSI$FILE_SYSTEM.PCSI$DATABASE;1
...scanned PCSI$PROCESSOR.PCSI$DATABASE;1
...scanned DEC-AXPVMS-DECNET_OSI-V0703-2.PCSI$DATABASE;1
...
...scanned DEC-AXPVMS-VMS-V0803-2.PCSI$DATABASE;1
Completed product database analysis with no errors detected
The command in this example verifies the active product
database files in their usual location on the system disk in
SYS$SYSTEM.
2.$ PRODUCT ANALYZE PDB /LOCATION=DKA300:[TEST] /PDB_TYPE=PRODUCT=TCPIP*)
Analyzing product database files in DKA300:[TEST]
...scanned DEC-AXPVMS-TCPIP-V0504-15.PCSI$DATABASE;1
...scanned DEC-AXPVMS-TCPIP_ECO-V0504-155.PCSI$DATABASE;1
...scanned DEC-AXPVMS-TCPIP_ECO-V0504-154.PCSI$DATABASE;1
...scanned DEC-AXPVMS-TCPIP_ECO-V0504-152.PCSI$DATABASE;1
Completed product database analysis with no errors detected
The command in this example analyzes the database files in
the DKA300:[TEST] directory for the TCP/IP product and all the
patch kits that have been applied to it. The root database file
PCSI$ROOT.PCSI$DATABASE must also be in this directory.
2 CONFIGURE
Creates a product configuration file (PCF) for one or more
products. Optionally uses the values in an existing PCF file
to create the new PCF.
Format
PRODUCT CONFIGURE product-name[,...] [/qualifiers]
3 Parameter
product-name
Names the product, or list of products, for which product
configuration files will be generated.
3 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/CONFIGURATION
/CONFIGURATION=(keyword[,...])
Specifies how the configuration choices are used. Keywords are:
CURRENT Uses values from the product database. These
values are the configuration choices made when
the product was installed or reconfigured.
PRODUCER Uses values specified by the software
manufacturer of the product.
INPUT=pcf-name Uses values from the specified product
configuration file.
OUTPUT=pcf-name Writes configuration choices to the specified
product configuration file. If no file
name is supplied, creates a file named
DEFAULT.PCSI$CONFIGURATION in the current
default directory.
The keywords CURRENT, PRODUCER, and INPUT are mutually exclusive.
(CURRENT is the default if none of these keywords is specified.)
The OUTPUT keyword can be used with the CURRENT, PRODUCER, or
INPUT keyword.
If you specify only one keyword, you can omit the parentheses.
/HELP
/HELP
/NOHELP (default)
Controls whether detailed explanations of product options and
informational text are displayed. The first time you install a
product, these explanations can help you decide which options to
select. When you perform subsequent installations or upgrades,
you might choose the brief explanations to save time.
When /NOHELP is selected, you can request a detailed explanation
about a question by performing one of the following actions at
the prompt:
o Press the Help key or PF2 key
o Type ? and press the Return key
/KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
MANDATORY_ A required correction to currently
UPDATE installed software. Functionally, this
type of kit is the same as a patch kit.
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PATCH A correction to currently installed
software. Installation of this kit does
not change the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
/LOG
/LOG
/NOLOG (default)
Displays the file specification of the configuration file that is
created.
/OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
/SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location defined by the logical
name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE
qualifier is not specified, PCSI searches the current default
directory.
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
3 Example
$ PRODUCT CONFIGURE EDITOR -
_$ /CONFIGURATION=(INPUT=EDITOR_REV1.PCF,OUTPUT=EDITOR_REV2.PCF)
The command in this example reads an existing PCF file named
EDITOR_REV1.PCF for a product named EDITOR to obtain default
values for its configuration options. Then a configuration
dialog allows the user to change and review all options.
Finally, the modified configuration values are saved in
EDITOR_REV2.PCF.
2 COPY
Copies or converts one or more existing product kits that you
specify to product kits in the format you request. For example,
you can create a kit in reference format from a kit in sequential
format, create a compressed kit from a kit in sequential format,
or simply copy a kit to a new location without changing its
format.
Format
PRODUCT COPY product-name
/DESTINATION=device-name:[directory-name]
[/qualifiers]
3 Description
The PRODUCT COPY command allows you to compress a sequential kit.
If you do not have a kit in sequential format, you must first
use the PRODUCT PACKAGE command to create a sequential kit from
the product materials. Then you can use the PRODUCT COPY command
to convert it to compressed format. You cannot create a kit in
compressed format directly from a kit in reference format.
Use the /FORMAT qualifier to determine the format of the product
kits that you create. Use the /KIT_ATTRIBUTES=FORMAT qualifier to
select kits of a particular format to be copied or converted.
If you copy a product kit that is signed and has an associated
manifest file in the source directory, both the kit and its
manifest are copied to the destination directory. A manifest
file is used for product kit validation. It must have a file name
and file type that match the file specification of the product
kit, with _ESW appended to the file type.
3 Parameter
product-name
Names the product, or list of products, to copy.
3 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/DESTINATION
/DESTINATION=device-name:[directory-name]
Specifies the location where the utility will create the
sequential or compressed kit. For a reference kit, specifies the
top-level directory location where the utility will place files.
If you do not provide a device name, the default is the user's
default device. If you omit the directory name, the default is
the user's default directory.
The PRODUCT COPY command ignores the PCSI$DESTINATION logical
name whether or not you use the /DESTINATION qualifier.
/FORMAT
/FORMAT=keyword
Specifies the output format of the product kit. Keywords are:
COMPRESSED Compressed format in which a data compression
technique is applied to a sequential kit to
produce a .PCSI$COMPRESSED file, which is the
compressed form of a sequential kit.
REFERENCE Reference format in which product files are placed
in a directory tree for direct access. The utility
creates a product description file, with a file
type of .PCSI$DESCRIPTION, in the top level of the
directory tree.
SEQUENTIAL Sequential format in which product files are
placed in a container file having a .PCSI file
type.
The default is to preserve the format of the product kit. You
must use this qualifier if you want to change the format of the
product kit.
/KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
MANDATORY_ A required correction to currently
UPDATE installed software. Functionally, this
type of kit is the same as a patch kit.
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PATCH A correction to currently installed
software. Installation of this kit does
not change the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
TRANSITION Used to register information about
a product that is installed but not
recorded in the product database
(for example, a product installed by
VMSINSTAL). This kit does not provide
product material.
/LOG
/LOG
/NOLOG (default)
Displays the file specification of the product kit file that is
created and the files packaged in the kit.
/OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
/OWNER_UIC
/OWNER_UIC=uic
Specifies the owner user identification code (UIC) for files
created during a copy operation. By default, the user executing
the operation owns the software product files. For example, if
you are logged in to your own account, you can use this qualifier
during a copy operation to assign ownership of the product files
to SYSTEM rather than to your own account. Specify the UIC in
alphanumeric format (in the form [name]) or in octal group-member
format (in the form [g,m]). UIC formats are described in the
OpenVMS User's Manual.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location defined by the logical
name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE
qualifier is not specified, PCSI searches the current default
directory.
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
3 Example
$ PRODUCT COPY ABC /SOURCE=[SHERMAN.ABC] -
_$ /DESTINATION=[KITS] /FORMAT=SEQUENTIAL
The command in this example converts product kit ABC, located
in the [SHERMAN.ABC] directory on the user's default device, to
a sequential copy in the [KITS] directory on the user's default
device.
2 DELETE
3 RECOVERY_DATA
Deletes one or more patch recovery data sets in order of creation
date, starting with the oldest one first. A recovery data set
is created when a patch kit is successfully installed with the
/SAVE_RECOVERY_DATA qualifier. Recovery data sets are used to
uninstall patches when you use the PRODUCT UNDO PATCH command.
Note that once patch recovery data is deleted, you cannot
uninstall any patch that is associated with this data. Installed
patches are not affected when you use the PRODUCT DELETE
RECOVERY_DATA command.
Format
PRODUCT DELETE RECOVERY_DATA [/qualifiers]
4 Parameters
None.
4 Qualifiers
/ALL
/ALL (default)
Selects all patch recovery data sets to be deleted. The recovery
data is deleted in the order it was created, starting with the
oldest set first. If you omit this qualifier from the command
line, the effect is the same as if you specified it.
/BEFORE
/BEFORE=time
Selects patch recovery data sets created before the specified
date and time. You can specify time as an absolute time, as
a combination of absolute and delta times, or as one of the
following keywords:
TODAY (default)
TOMORROW
YESTERDAY
For information about specifying time values. see the OpenVMS
User's Manual.
/OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keyword is:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the recovery data sets that have been
selected for processing.
/LOG
/LOG
/NOLOG (default)
Displays the file specifications of the files within the recovery
data sets that are being deleted.
/OLDEST
/OLDEST=count
Specifies the number of oldest recovery data sets that you want
to delete. For example, if you specify /OLDEST=2, the PRODUCT
DELETE RECOVERY_DATA command deletes the two oldest recovery data
sets. If you do not specify a number with this qualifier, the
default value is 1.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects recovery data sets located on a privately mounted system
disk. By default, PCSI searches the currently booted system disk
for recovery data sets.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
4 Example
$ PRODUCT DELETE RECOVERY_DATA /OLDEST=2
The command in this example deletes the two oldest recovery
data sets starting with the one that was created first,
followed by next oldest recovery data set. If, for example,
three patch recovery data sets are on the system disk, you
still have one set preserved after this operation completes.
Remember that once a patch recovery data set is deleted, you
cannot uninstall the patch kit associated with the deleted
recovery data. The installed patch kits, however, are not
affected by this action.
2 EXTRACT
Retrieves a specified file or files.
3 FILE
Retrieves a user-specified file or files from a software product
kit. The original name of the file is preserved when it is
extracted.
Format
PRODUCT EXTRACT FILE product-name[,...] [/qualifiers]
4 Parameter
product-name
Names the product, or list of products, from whose kits the
selected file or files are to be retrieved. This parameter is
required.
4 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/DESTINATION
/DESTINATION=device-name:[directory-name]
Specifies the location where the utility will place all of the
files that the user indicates are to be retrieved. If the device
name is not provided, the default is the user's default device.
If the directory name is omitted, or the /DESTINATION qualifier
is not specified, the default is the user's default directory.
The PRODUCT EXTRACT FILE command ignores the PCSI$DESTINATION
logical name whether or not you use the /DESTINATION qualifier.
/KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
MANDATORY_ A required correction to currently
UPDATE installed software. Functionally, this
type of kit is the same as a patch kit.
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PATCH A correction to currently installed
software. Installation of this kit does
not change the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
TRANSITION Used to register information about
a product that is installed but not
recorded in the product database
(for example, a product installed by
VMSINSTAL). This kit does not provide
product material.
/LOG
/LOG
/NOLOG (default)
Displays the file specifications of the files that are extracted
from the kit.
/OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/SELECT
/SELECT=filename[,...]
Specifies the name of a file, or a list of files, to be extracted
from the specified product kit. You can use the asterisk (*) and
the percent sign (%) wildcard characters for all or part of the
file name. The file name can contain a directory specification
that includes an ellipsis (...). If you omit this qualifier, all
files will be extracted from the specified kit or kits.
/SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location that the logical name
PCSI$SOURCE defines. If PCSI$SOURCE is not defined, and the
/SOURCE qualifier is not specified, PCSI searches the current
default directory.
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
4 Example
$ PRODUCT EXTRACT FILE TEST /SELECT=TEST.EXE /SOURCE=[AL]
In this example, PCSI extracts the file TEST.EXE from the kit
of the product TEST that is in the [AL] directory on the user's
default disk. The extracted file TEST.EXE is placed in the
user's current default directory.
3 PDF
Retrieves the product description file (PDF) from a
software product. The file type of the extracted PDF file is
.PCSI$DESCRIPTION.
You can obtain the PDF from the software product kit or, if the
product is already installed, from the product database.
Format
PRODUCT EXTRACT PDF product-name[,...] [/qualifiers]
4 Parameter
product-name
Names the product, or list of products, whose PDF file is to be
retrieved from the kit.
4 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/DESTINATION
/DESTINATION=device-name:[directory-name]
Specifies the location where the utility will place the
extracted product description file (PDF). If the device name
is not provided, the default is the user's default device. If
the directory name is omitted, or the /DESTINATION qualifier is
not specified, the default is the user's default directory. The
The PRODUCT EXTRACT PDF command ignores the PCSI$DESTINATION
logical name whether or not you use the /DESTINATION qualifier.
/FROM
/FROM=keyword
Specifies whether the PDF is to be extracted from a product kit
or from the product database if the product is already installed.
Keywords are the following:
KIT Extract the PDF file from a product kit. This is the
default.
PDB Extract the PDF file of an installed product from the
product database.
The /FROM=PDB and /SOURCE qualifiers are mutually
exclusive.
/KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
MANDATORY_ A required correction to currently
UPDATE installed software. Functionally, this
type of kit is the same as a patch kit.
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PATCH A correction to currently installed
software. Installation of this kit does
not change the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
TRANSITION Used to register information about
a product that is installed but not
recorded in the product database
(for example, a product installed by
VMSINSTAL). This kit does not provide
product material.
/LOG
/LOG
/NOLOG (default)
Displays the file specification of the product description file
that is created.
/OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location that the logical name
PCSI$SOURCE defines. If PCSI$SOURCE is not defined, and the
/SOURCE qualifier is not specified, PCSI searches the current
default directory.
The /SOURCE and /FROM=PDB qualifiers are mutually exclusive.
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
4 Example
$ PRODUCT EXTRACT PDF TEST /SOURCE=[AL]
In this example, PCSI extracts the product description file
(PDF) from the kit of the product TEST that is in the [AL]
directory on the user's default disk and places it in the
user's current default directory.
3 PTF
Retrieves the product text file (PTF) from a software product
kit. The PTF file is stored in a product kit as a text library
file. The file type of the extracted PTF is .PCSI$TLB. In
addition, a text file version of this text library file is
created with a file type of .PCSI$TEXT.
Format
PRODUCT EXTRACT PTF product-name[,...] [/qualifiers]
4 Parameter
product-name
Names the product, or list of products, whose PTF file is to be
retrieved from the kit.
4 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/DESTINATION
/DESTINATION=device-name:[directory-name]
Specifies the location where the utility will place the
extracted product text file (PTF). If the device name is not
provided, the default is the user's default device. If the
directory name is omitted, or the /DESTINATION qualifier is
not specified, the default is the user's default directory. The
The PRODUCT EXTRACT PTF command ignores the PCSI$DESTINATION
logical name whether or not you use the /DESTINATION qualifier.
/KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
MANDATORY_ A required correction to currently
UPDATE installed software. Functionally, this
type of kit is the same as a patch kit.
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PATCH A correction to currently installed
software. Installation of this kit does
not change the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
TRANSITION Used to register information about
a product that is installed but not
recorded in the product database
(for example, a product installed by
VMSINSTAL). This kit does not provide
product material.
/LOG
/LOG
/NOLOG (default)
Displays the file specifications of the product text and product
text library files that are created.
/OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location that the logical name
PCSI$SOURCE defines. If PCSI$SOURCE is not defined, and the
/SOURCE qualifier is not specified, PCSI searches the current
default directory.
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
4 Example
$ PRODUCT EXTRACT PTF TEST /SOURCE=[AL]
In this example, PCSI extracts the product text file (PTF)
from the kit of the product TEST that is in the [AL] directory
on the user's default disk and places two files in the user's
current default directory: the extracted text library file
(.PCSI$TLB) and a text file (.PCSI$TEXT) created from the
library.
3 RELEASE_NOTES
Retrieves the release notes for the selected product or group of
products. The name of each release notes file is preserved unless
you override it with the /FILE qualifier.
Format
PRODUCT EXTRACT RELEASE_NOTES product-name[,...] [/qualifiers]
4 Parameter
product-name
Names the product, or list of products, from which to extract
release notes.
4 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/DESTINATION
/DESTINATION=device-name:[directory-name]
Specifies the location where the utility will place the extracted
release notes files. If the device name is not provided, the
default is the user's default device. If the directory name is
omitted, or the /DESTINATION qualifier is not specified, the
default is the user's default directory.
The PRODUCT EXTRACT RELEASE_NOTES command ignores the
PCSI$DESTINATION logical name whether or not you use the
/DESTINATION qualifier.
The /DESTINATION and /FILE qualifiers are mutually exclusive.
/FILE
/FILE=filespec
Specifies the name of the output file that will contain the
release notes. If no file name is given, the original name of
the release notes file is preserved and the file is written to
your default directory.
The /FILE qualifier has been superseded by /DESTINATION. HP
recommends that you use /DESTINATION in command procedures and
operator instructions. See the description of /DESTINATION for
more information.
The /FILE and /DESTINATION qualifiers are mutually exclusive.
/KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
MANDATORY_ A required correction to currently
UPDATE installed software. Functionally, this
type of kit is the same as a patch kit.
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PATCH A correction to currently installed
software. Installation of this kit does
not change the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
/LOG
/LOG
/NOLOG (default)
Displays the file specification of the release notes file that is
created.
/OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location that the logical name
PCSI$SOURCE defines. If PCSI$SOURCE is not defined, and the
/SOURCE qualifier is not specified, PCSI searches the current
default directory.
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
/WORK
/WORK=device:[directory]
Specifies the name of the device and directory acting as a
temporary work area. By default, temporary files are created
in subdirectories of the user's login directory.
4 Example
$ PRODUCT EXTRACT RELEASE_NOTES XYZ /VERSION=2.3/FILE=[RN]XYZ.TXT
The command in this example places the release notes for
Version 2.3 of the product XYZ in a file named [RN]XYZ.TXT
on your current default device.
2 FIND
Displays the names of software product kits located in the
specified directory, along with kit type and kit format
information.
Format
PRODUCT FIND product-name[,...] [/qualifiers]
3 Parameter
product-name
Names the product, or list of products to find.
3 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/FULL
/FULL
/NOFULL (default)
Displays information in 132-column format. The /NOFULL qualifier
displays a subset of available information in 80-column format.
/KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
MANDATORY_ A required correction to currently
UPDATE installed software. Functionally, this
type of kit is the same as a patch kit.
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PATCH A correction to currently installed
software. Installation of this kit does
not change the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
TRANSITION Used to register information about
a product that is installed but not
recorded in the product database
(for example, a product installed by
VMSINSTAL). This kit does not provide
product material.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location defined by the logical
name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE
qualifier is not specified, PCSI searches the current default
directory.
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
3 Example
$ PRODUCT FIND TEST* /BASE_SYSTEM=VAXVMS
The command in this example searches for all software product
kits located in the user's default directory and displays the
names of all versions of products whose names begin with "TEST"
and are intended to be installed on OpenVMS VAX.
2 INSTALL
Installs one or more software products on your system and updates
the product database. You can also use this command to install
patch and mandatory update kits that modify previously installed
products.
Format
PRODUCT INSTALL product-name[,...] [/qualifiers]
3 Description
To uninstall complete products, including any patches or
mandatory updates that might have been applied to them, use the
PRODUCT REMOVE command.
To uninstall patches or mandatory updates while still retaining
the original product that was installed, use the PRODUCT UNDO
PATCH command. However, to use PRODUCT UNDO PATCH, you must have
created and retained recovery data sets for these patches. (By
default, the PRODUCT INSTALL command creates a recovery data set
when patch kits are installed.)
For more information about the use of recovery data sets, see the
description of the PRODUCT UNDO PATCH command.
3 Parameter
product-name
Names the product, or list of products, to install.
3 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/CONFIGURATION
/CONFIGURATION=(keyword[,...])
Specifies how the configuration choices will be supplied.
Keywords are:
CURRENT Uses values from the product database. These
values are the configuration choices made when
the product was installed or reconfigured.
PRODUCER Uses values specified by the software
manufacturer of the product.
INPUT=pcf-name Uses values from the specified product
configuration file.
OUTPUT=pcf-name Writes configuration choices to the specified
product configuration file. If no file
name is supplied, creates a file named
DEFAULT.PCSI$CONFIGURATION in the current
default directory.
The keywords CURRENT, PRODUCER, and INPUT are mutually exclusive.
(CURRENT is the default if none of these keywords is specified.)
The OUTPUT keyword can be used with the CURRENT, PRODUCER, or
INPUT keyword.
If you specify only one keyword, you can omit the parentheses.
/DEBUG
/DEBUG
/NODEBUG (default)
Specifies options useful to the product kit developer during kit
testing. Keywords are:
CONFLICT_DATA Displays supplemental information about file
and module conflict resolution. This includes
the generation numbers used in the comparison,
whether the object is retained or replaced,
and the name of the product that supplies the
object.
Use /DEBUG=CONFLICT_DATA in conjunction with the /LOG qualifier
to display all information about conflict resolution. For more
information, see the POLYCENTER Software Installation Utility
Developer's Guide.
/DESTINATION
/DESTINATION=device-name:[directory-name]
Specifies the top-level directory where the utility will install
software product files. If you omit the device name, the utility
uses your current default device. If you omit the directory name,
the utility uses [VMS$COMMON] as the default directory.
If you do not use this qualifier to specify a destination, the
utility installs the software in the location defined by logical
name PCSI$DESTINATION. If this logical name is not defined, the
utility installs the software in SYS$SYSDEVICE:[VMS$COMMON], the
default top-level directory for software product files.
/HELP
/HELP
/NOHELP (default)
Controls whether detailed explanations of product options and
informational text are displayed. The first time you install a
product, these explanations can help you decide which options to
select. When you perform subsequent installations or upgrades,
you might choose the brief explanations to save time.
When /NOHELP is selected, you can request a detailed explanation
about a question by performing one of the following actions at
the prompt:
o Press the Help key or PF2 key
o Type ? and press the Return key
/KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
MANDATORY_ A required correction to currently
UPDATE installed software. Functionally, this
type of kit is the same as a patch kit.
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PATCH A correction to currently installed
software. Installation of this kit does
not change the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
/LOG
/LOG
/NOLOG (default)
Displays the file specification of each file processed. When
logging is enabled, messages notify you whenever product files,
libraries, directories, recovery data files, and product database
files are created, deleted, or modified. Information about any
file and module conflict resolution is also provided.
/OPTIONS
/OPTIONS=(keyword[,...])
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
The NOVALIDATE_KIT and SIGNED_KIT keywords are
mutually exclusive.
SHOW_DISK_USAGE Displays estimated disk block usage. Both peak
utilization and net change are shown in addition
to the amount of free space available before and
after the operation.
SIGNED_KIT Requires all software product kits selected for
the operation to be signed kits that have passed
validation; otherwise, the operation is not
performed.
The SIGNED_KIT and NOVALIDATE_KIT keywords are
mutually exclusive.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/RECOVERY_MODE
/RECOVERY_MODE (default)
/NORECOVERY_MODE
Enables or disables product installation in recovery mode. The
directories, files, and libraries that are modified or deleted
in the installation process are saved in a directory tree on the
system disk unless you specify /NORECOVERY_MODE. These files,
along with a copy of the product database, comprise the recovery
data set.
The recovery data set is handled somewhat differently when
an installation ends successfully or if it terminates
unsuccessfully.
o If an installation terminates in its execution phase, either
voluntarily (by using Ctrl/Y or Ctrl/C) or involuntarily
(because of a fatal error), the saved recovery data is used to
roll back all the displaced objects in an attempt to reinstate
the product environment prior to the interrupted operation.
Then the recovery data set is deleted.
o At the end of the successful installation of one or more full,
platform, or partial kits, the recovery data set is deleted.
o At the end of the successful installation of one or more
patch or mandatory update kits, the recovery data set is
automatically retained for possible future use with the
PRODUCT UNDO PATCH command unless you specify the /NOSAVE_
RECOVERY_DATA qualifier.
/REMARK
/REMARK=string
Records a comment in the product database about the task you
are performing. The PRODUCT SHOW HISTORY command displays the
recorded comments. For each product, PCSI stores a chronological
list of tasks you perform and the associated remarks. The default
behavior is that no remark is recorded.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
/SAVE_RECOVERY_DATA
/SAVE_RECOVERY_DATA (default)
/NOSAVE_RECOVERY_DATA
Enables or disables the retention of recovery data for the
PRODUCT UNDO PATCH command to use.
This qualifier applies only to patch and mandatory update kits.
It is ignored when full, operating system, platform, partial, or
transition kits are installed.
The directories, files, and libraries that are modified or
deleted in the process of installation are saved in a directory
tree on the system disk unless you specify /NOSAVE_RECOVERY_DATA.
These files, along with a copy of the product database, comprise
the recovery data set. This recovery data set can be used later
to uninstall patch and mandatory update kits.
/SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location defined by the logical
name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE
qualifier is not specified, PCSI searches the current default
directory.
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/TEST
/TEST (default)
/NOTEST
Requests that PCSI run the installation verification procedure
(IVP) for the product.
/TRACE
/TRACE
/NOTRACE (default)
Identifies the creation and deletion of subprocesses and the DCL
commands and command procedures submitted to these subprocesses
for execution during the processing of the PRODUCT command.
Also shows the creation and deletion of scratch directories and
temporary files that the PCSI utility provides for the subprocess
environment. Any output that DCL produces is also displayed.
This qualifier is primarily a debugging aid for product
developers to trace the execution of command procedures included
in their product kits. For more information, see the POLYCENTER
Software Installation Utility Developer's Guide.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
/WORK
/WORK=device:[directory]
Specifies the name of the device and directory acting as a
temporary work area. By default, temporary files are created
in subdirectories of the user's login directory.
3 Example
$ PRODUCT INSTALL POSIX/VERSION=3.0 /CONFIGURATION=OUTPUT=POSIX.PCF
The command in this example installs POSIX Version 3.0 and
creates a product configuration file.
2 LIST
Lists the names of the files contained in a software product
kit. All files are listed unless you use the /SELECT qualifier to
specify a subset of the files.
Format
PRODUCT LIST product-name[,...] [/qualifiers]
3 Parameter
product-name
Names the product, or list of products, whose kit contents are to
be listed. This parameter is required.
3 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/FULL
/FULL
/NOFULL (default)
Displays information about files contained in the kit in 132-
column format. The /FULL qualifier shows the name of each file,
gives its size in blocks, and provides a comment field that can
provide additional information-for example, the file is a product
description file, a temporary file, or a module file that updates
a library file. The /NOFULL qualifier displays only the name of
each file in the kit in 80-column format.
/KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
MANDATORY_ A required correction to currently
UPDATE installed software. Functionally, this
type of kit is the same as a patch kit.
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PATCH A correction to currently installed
software. Installation of this kit does
not change the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
TRANSITION Used to register information about
a product that is installed but not
recorded in the product database
(for example, a product installed by
VMSINSTAL). This kit does not provide
product material.
/OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/SELECT
/SELECT=filename[,...]
Specifies the name of a file, or a list of files; these files are
in the specified product kit. You can use the asterisk (*) and
the percent sign (%) wildcard characters for all or part of the
file name. The file name can contain a directory specification
that includes an ellipsis (...).
/SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location that the logical name
PCSI$SOURCE defines. If PCSI$SOURCE is not defined, and the
/SOURCE qualifier is not specified, PCSI searches the current
default directory.
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
3 Example
$ PRODUCT LIST TEST /SELECT=TEST.* /SOURCE=[AL]
In this example, PCSI lists all the files that match the
selection criteria TEST.* from the kit of the product TEST
that is in the [AL] directory on the user's default disk.
2 PACKAGE
Creates a software product kit that can be installed by using the
PRODUCT INSTALL command.
Format
PRODUCT PACKAGE product-name[,...] [/qualifiers]
/SOURCE=file-specification
/DESTINATION=device-name[:directory-name]
/MATERIAL=(path-name[,...])
3 Description
The PRODUCT PACKAGE command collects input from the source
and material directories and creates the product kit in the
destination directory. The source directory contains the required
product description file (PDF) and an optional product text file
(PTF) that the kit developer provides. The material directories
contain the executable images and other files that make up the
product. In addition, any command procedures that the product
developer supplies to perform product specific installation tasks
are in the material directories.
During a package operation, the PCSI utility stores the PDF
and PTF in the kit in a modified format. Comments are removed
from the PDF and information is added such as the size of each
installed file. The PTF file is converted to text library format
and given a file type of .PCSI$TLB.
The PRODUCT PACKAGE command can create a product kit in either
sequential or reference format. To create a kit in compressed
format, first enter the PRODUCT PACKAGE command to create a kit
in sequential format. Then enter the PRODUCT COPY command to
convert this sequential kit to a kit in compressed format.
The PRODUCT PACKAGE command requires the /SOURCE, /DESTINATION,
and /MATERIAL qualifiers.
3 Parameter
product-name
Names the product or list of products to be packaged.
3 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/COPY
/COPY(default)
/NOCOPY
Specifies whether you want the product material files and
associated directories included in the product kit when you are
producing a kit in reference format. The /NOCOPY qualifier can
save file processing time when you are debugging a PDF file and
do not need to produce a complete product kit.
The /NOCOPY and /FORMAT=SEQUENTIAL qualifiers are mutually
exclusive.
/DESTINATION
/DESTINATION=device-name:[directory-name]
Specifies the location where the product kit will be created.
If /FORMAT=SEQUENTIAL is used, /DESTINATION specifies the
directory where the utility creates the sequential kit. A
sequential kit is a container file that includes the PDF, PTF,
and all the images and other materials that make up the product.
The file type of the sequential kit file is .PCSI.
If /FORMAT=REFERENCE is used (or defaulted), /DESTINATION
specifies the directory where the utility creates the output
PDF file and optional PTF file. The file types of the PDF and
PTF files are .PCSI$DESCRIPTION and .PCSI$TLB, respectively. The
images and other materials that make up the product are placed in
a directory tree under this directory.
If the device name is not provided, the command defaults to the
user's default device. If the directory name is omitted, the
command defaults to the user's default directory.
The PRODUCT PACKAGE command ignores the PCSI$DESTINATION
logical name whether or not you use the /DESTINATION qualifier.
/FORMAT
/FORMAT=keyword
Specifies the output format of the product kit. Keywords are:
REFERENCE Reference format in which product files are placed
in a directory tree for direct access. The utility
creates a product description file, with a file
type of .PCSI$DESCRIPTION, in the top level of the
directory tree.
SEQUENTIAL Sequential format in which product files are placed in
a container file having a .PCSI file type.
The default is /FORMAT=REFERENCE.
You cannot use the PRODUCT PACKAGE command to create a kit in
compressed format. Instead, use the PRODUCT COPY command to
convert a kit in sequential format to a kit in compressed format.
/LOG
/LOG
/NOLOG (default)
Displays the file specifications of the files that are packaged
in the product kit and the name of the product kit file.
/OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keyword is:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
/MATERIAL
/MATERIAL=(path-name[,...])
Specifies one or more locations in which the utility can search
for product material files to include in the software product
kit. Material files represent the output of the producer's
software engineering process, that is, all files that make up
the software product, including any command procedures that might
be used during installation.
Note that the location of the PDF and PTF are not specified
with the /MATERIAL qualifier. See the /SOURCE qualifier for more
information.
This is a required qualifier for the PRODUCT PACKAGE command.
Parentheses (()) are optional only when you specify a single
path name. They are required when you specify multiple path
names.
The format for path-name is: device-name:[directory-name]
You can specify path-name as a:
Specific Only one directory is searched.
directory
Wildcard The directory name includes one or more of the
directory wildcard characters asterisk (*), percent sign
(%), or ellipsis (...). All directories that
satisfy the wildcard specification are searched.
Root A period (.) following the directory name
directory indicates a root directory specification. For
example, TEST$:[ABC.FT2.] is combined with
the relative file specification from the FILE
statement in the PDF to locate the file during
packaging.
When the path-name contains a root directory, the utility appends
the relative file specification from the FILE statement in the
PDF to the root directory to determine where to find the file.
However, when either a specific directory or a wildcard directory
is used in the path-name, the relative file specification from
the FILE statement is not used to find the file. Instead, the
directory as specified in the /MATERIAL qualifier is used to
search for the file.
Note that when you use either a wildcard directory or a list of
path names, if files in different directories have the same name,
only the first file in the search path is packaged in the kit.
As a result, the same file is packaged each time a FILE statement
refers to the file name because the relative file specification
is not used to identify the file uniquely. Therefore, if your
product has different files with the same name in different
directories, you must use the root directory form of the path-
name to package these files correctly.
In general, using a specific directory or a root directory
is more efficient than a wildcard directory. When packaging
a product that contains hundreds of files, you might notice
a significant difference in processing time, depending on the
method you use to specify the path name. The choice of material
path name does not affect the time required to install the kit.
/OWNER_UIC
/OWNER_UIC=uic
Specifies the owner user identification code (UIC) for files
created during a copy operation. By default, the user executing
the operation owns the software product files. For example, if
you are logged in to your own account, you can use this qualifier
during a copy operation to assign ownership of the product files
to SYSTEM rather than to your own account. Specify the UIC in
alphanumeric format (in the form [name]) or in octal group-member
format (in the form [g,m]). UIC formats are described in the
OpenVMS User's Manual.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/SOURCE
/SOURCE=file-specification
Specifies the location of the input PDF file. If the device name
is omitted, it defaults to the user's default device. If the
directory name is omitted, it defaults to the user's default
directory. If the file name and file type components of the file
specification are not provided, they default to <full-product-
name>.PCSI$DESCRIPTION.
The optional PTF file, if used, must be in the same directory and
have the same file name as the PDF with a .PCSI$TEXT file type.
If a file named <full-product-name>.PCSI$TEXT is not found, the
package operation does not use a PTF file.
This is a required qualifier for the PRODUCT PACKAGE command. The
logical name PCSI$SOURCE is not used.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
3 Example
$ PRODUCT PACKAGE VIEWER -
_$ /PRODUCER=ABC /BASE_SYSTEM=AXPVMS -
_$ /FORMAT=SEQUENTIAL /LOG -
_$ /SOURCE=BUILD$:[TEST.PDF] -
_$ /DESTINATION=DKA200:[PCSI_KITS] -
_$ /MATERIAL=BUILD$:[TEST.VIEWER0201]
The directory [TEST.PDF] contains the PDF and
PTF named ABC-AXPVMS-VIEWER-0201-1.PCSI$DESC and
ABC-AXPVMS-VIEWER-0201-1.PCSI$TEXT, respectively.
These files and the product material files from the
BUILD$:[TEST.VIEWER0201] directory are used to create the kit
for product VIEWER. When the PRODUCT PACKAGE command completes,
a sequential kit named ABC-AXPVMS-VIEWER-0201-1.PCSI is created
and placed in the DKA200:[PCSI_KITS] directory.
The material path-name can be specified using a wildcard format
such as the following:
/MATERIAL=BUILD$:[TEST.VIEWER0201...]
In this case, the entire directory tree is searched to find the
product files to package.
The material path-name can also be specified in root directory
format such as the following:
/MATERIAL=BUILD$:[TEST.VIEWER0201.]
In this case, each FILE statement in the PDF refers
to a specific subdirectory. For example, if the FILE
statement contains the relative file specification
[DOC]CHAPTER1.HTML, the package operation looks up the file
in BUILD$:[TEST.VIEWER0201.DOC]CHAPTER1.HTML. Using a root
directory in the path-name allows more than one file named
CHAPTER1.HTML to be in different subdirectories.
2 RECONFIGURE
Modifies the configuration of an installed product by allowing a
user to change installation options.
Format
PRODUCT RECONFIGURE product-name[,...] [/qualifiers]
3 Description
Reconfiguration of a product might result in the addition or
deletion of files, or both, depending on the user's selection
or deselection of options; that is, users can select options
that were not selected when the product was installed, or they
can deselect options that were selected when the product was
installed. At the conclusion of the operation, the product
database is updated to reflect the changes.
Access to the original software product kit that was used to
install the product is required to perform the reconfigure
operation.
3 Parameter
product-name
Names the product, or list of products, to reconfigure.
3 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/CONFIGURATION
/CONFIGURATION=(keyword[,...])
Specifies how the configuration choices are used. Keywords are:
CURRENT Uses values from the product database. These
values are the configuration choices made when
the product was installed or reconfigured.
PRODUCER Uses values specified by the software
manufacturer of the product.
INPUT=pcf-name Uses values from the specified product
configuration file.
OUTPUT=pcf-name Writes configuration choices to the specified
product configuration file. If no file
name is supplied, creates a file named
DEFAULT.PCSI$CONFIGURATION in the current
default directory.
The keywords CURRENT, PRODUCER, and INPUT are mutually exclusive.
(CURRENT is the default if none of these keywords is specified.)
The OUTPUT keyword can be used with the CURRENT, PRODUCER, or
INPUT keyword.
If you specify only one keyword, you can omit the parentheses.
/DEBUG
/DEBUG
/NODEBUG (default)
Specifies options useful to the product kit developer during kit
testing. Keywords are:
CONFLICT_DATA Displays supplemental information about file
and module conflict resolution. This includes
the generation numbers used in the comparison,
whether the object is retained or replaced,
and the name of the product that supplies the
object.
Use /DEBUG=CONFLICT_DATA in conjunction with the /LOG qualifier
to display all information about conflict resolution. For more
information, see the POLYCENTER Software Installation Utility
Developer's Guide.
/HELP
/HELP
/NOHELP (default)
Controls whether detailed explanations of product options and
informational text are displayed. The first time you install a
product, these explanations can help you decide which options to
select. When you perform subsequent installations or upgrades,
you might choose the brief explanations to save time.
When /NOHELP is selected, you can request a detailed explanation
about a question by performing one of the following actions at
the prompt:
o Press the Help key or PF2 key
o Type ? and press the Return key
/KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
/LOG
/LOG
/NOLOG (default)
Displays the file specification of each file processed. When
logging is enabled, messages notify you whenever product files,
libraries, directories, recovery data files, and product database
files are created, deleted, or modified. Information about any
file and module conflict resolution is also provided.
/OPTIONS
/OPTIONS=(keyword[,...])
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
The NOVALIDATE_KIT and SIGNED_KIT keywords are
mutually exclusive.
SHOW_DISK_USAGE Displays estimated disk block usage. Both peak
utilization and net change are shown in addition
to the amount of free space available before and
after the operation.
SIGNED_KIT Requires all software product kits selected for
the operation to be signed kits that have passed
validation; otherwise, the operation is not
performed.
The SIGNED_KIT and NOVALIDATE_KIT keywords are
mutually exclusive.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/RECOVERY_MODE
/RECOVERY_MODE (default)
/NORECOVERY_MODE
Enables or disables product reconfiguration in recovery mode. The
directories, files, and libraries that are modified or deleted
in the reconfiguration process are saved in a directory tree on
the system disk unless you specify /NORECOVERY_MODE. These files,
along with a copy of the product database, comprise the recovery
data set.
The recovery data set is handled somewhat differently when
a reconfiguration ends successfully or if it terminates
unsuccessfully.
o If a reconfiguration terminates in its execution phase, either
voluntarily (by using Ctrl/Y or Ctrl/C) or involuntarily
(because of a fatal error), the saved recovery data is used to
roll back all the displaced objects in an attempt to reinstate
the product environment prior to the interrupted operation.
Then the recovery data set is deleted.
o At the end of a successful reconfiguration, the recovery data
set is deleted.
/REMARK
/REMARK=string
Records a comment in the product database about the task you
are performing. The PRODUCT SHOW HISTORY command displays the
recorded comments. For each product, PCSI stores a chronological
list of tasks you perform and the associated remarks. The default
behavior is that no remark is recorded.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
/SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location defined by the logical
name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE
qualifier is not specified, PCSI searches the current default
directory.
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/TRACE
/TRACE
/NOTRACE (default)
Identifies the creation and deletion of subprocesses and the DCL
commands and command procedures submitted to these subprocesses
for execution during the processing of the PRODUCT command.
Also shows the creation and deletion of scratch directories and
temporary files that the PCSI utility provides for the subprocess
environment. Any output that DCL produces is also displayed.
This qualifier is primarily a debugging aid for product
developers to trace the execution of command procedures included
in their product kits. See the POLYCENTER Software Installation
Utility Developer's Guide for more information.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
/WORK
/WORK=device:[directory]
Specifies the name of the device and directory acting as a
temporary work area. By default, temporary files are created
in subdirectories of the user's login directory.
3 Example
$ DEFINE PCSI$SOURCE DKA500:[DWMOTIF.KIT]
$ PRODUCT RECONFIGURE DWMOTIF /VERSION=V1.2-3
The command in this example enters into a dialog with the user
to change the configuration options for the product DECwindows
Motif Version 1.2-3.
2 REGISTER
Either records product information in the product database
(REGISTER PRODUCT) or records a volume label change of the volume
containing the installed products (REGISTER VOLUME).
3 PRODUCT
Records information in the product database about one or more
installed products that are not yet registered in the database.
Format
PRODUCT REGISTER PRODUCT product-name[,...] [/qualifiers]
4 Description
The PRODUCT REGISTER PRODUCT command only updates the product
database; it does not copy any files ' to your system.
You can use this command to add information to the product
database about products that have been installed by a mechanism
other than PCSI, such as VMSINSTAL. You can also use this command
to store information about products previously installed by the
PCSI utility if the product database needs to be rebuilt due to
file corruption or deleted database files.
To register a product, you need to have a file in the source
directory to supply details about the product being registered.
This file can be one of the following:
o A complete product kit
o The product description file (PDF) extracted from the product
kit or database
o A special transition kit that identifies files installed by a
mechanism other than the PCSI utility.
If you do not have a kit available to provide detailed
information about a product, you can use the command procedure
SYS$UPDATE:PCSI$REGISTER_PRODUCT.COM to register the name of
the product and its version, producer, and base system in the
product database. After you register a product using the command
procedure, other products can reference it, and the PRODUCT SHOW
PRODUCT command displays it as an installed product.
4 Parameter
product-name
Names the product, or list of products, to register.
4 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/CHECK_ONLY
Concludes the action of the command after performing file
conflict detection, searching the destination device for all
files listed in the product description file, and displaying file
lookup summary data. This option allows you to perform a "dry
run" of the registration operation without modifying the product
database.
/DESTINATION
/DESTINATION=device-name:[directory-name]
Specifies the top-level directory where the product to be
registered resides. If you omit the device name, the utility uses
your current default device. If you omit the directory name, the
utility uses [VMS$COMMON] as the default directory.
If you do not use this qualifier to specify a destination,
the utility uses the location defined by logical name
PCSI$DESTINATION. If this logical name is not defined, the
utility registers the software in SYS$SYSDEVICE:[VMS$COMMON], the
default top-level directory for software product files.
/KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
TRANSITION Used to register information about
a product that is installed but not
recorded in the product database
(for example, a product installed by
VMSINSTAL). This kit does not provide
product material.
/LOG
/LOG
/NOLOG (default)
Displays the file specifications of the product files and
directories that are registered in the product database.
/OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
The NOVALIDATE_KIT and SIGNED_KIT keywords are
mutually exclusive.
REGISTER_ALL_ Registers all files listed in the product
FILES description file of the kit, even if they are
not currently present on the destination device.
SIGNED_KIT Requires all software product kits selected for
the operation to be signed kits that have passed
validation; otherwise, the operation is not
performed.
The SIGNED_KIT and NOVALIDATE_KIT keywords are
mutually exclusive.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/REMARK
/REMARK=string
Records a comment in the product database about the task you
are performing. The PRODUCT SHOW HISTORY command displays the
recorded comments. For each product, PCSI stores a chronological
list of tasks you perform and the associated remarks. The default
behavior is that no remark is recorded.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
/SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location defined by the logical
name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE
qualifier is not specified, PCSI searches the current default
directory.
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
4 Example
$ PRODUCT REGISTER PRODUCT TOOLCHEST /SOURCE=DKB500:[TOOLCHEST.KIT]
The command in this example registers the product TOOLCHEST in
the product database. TOOLCHEST was installed by VMSINSTAL, and
a special transition kit is in the source directory to supply
details about the product.
3 VOLUME
For a volume containing installed products, records a change in
volume label in the product database.
For device independence, the product database identifies the
destination device of an installed product by its logical volume
name, not by its physical device name. The logical volume name
(usually in the form DISK$labelname) is defined by the MOUNT
command and associated with the device.
Format
PRODUCT REGISTER VOLUME old-volume-label device-name
[/qualifiers]
4 Description
You can check the logical volume name of a mounted device by
issuing a command in the following format:
$ WRITE SYS$OUTPUT F$GETDVI("device","LOGVOLNAM")
When you use the SET VOLUME command to change the volume label
of a nonsystem device that contains installed products, you
must also use the PRODUCT REGISTER VOLUME command to update the
product database with this information. Register the new volume
label after you dismount and remount the volume so that the new
logical volume name (DISK$labelname) is defined.
If you change the volume label of the system device, you do not
need to use the PRODUCT REGISTER VOLUME command because PCSI
automatically detects the change after the volume is remounted
following a system reboot.
4 Parameters
old-volume-label
Names the old (existing) volume label.
device-name
Names the device for which the volume label is to be changed in
the product database.
4 Qualifiers
/LOG
/LOG
/NOLOG (default)
Displays the file specifications of the product database files
that are created or modified.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
4 Example
$ PRODUCT REGISTER VOLUME AXPVMSV62 DKA0:
The command in this example replaces all occurrences of the old
volume label in the PCSI database with the current volume label
of the specified disk.
2 REMOVE
Uninstalls one or more software products from your system and
updates the product database. This command operates on complete
products. Any patches or mandatory updates that might have been
applied to complete products are also removed.
To uninstall patches or mandatory updates while still retaining
the original product that was installed, use the PRODUCT UNDO
PATCH command.
Format
PRODUCT REMOVE product-name[,...] [/qualifiers]
3 Parameter
product-name
Names the installed product or list of installed products to
remove. Specify only the names of complete products, not the
names of patches or mandatory updates applied to products.
3 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
/LOG
/LOG
/NOLOG (default)
Displays the file specification of each file processed. When
logging is enabled, messages notify you whenever product files,
libraries, directories, and product database files are created,
deleted, or modified.
/OPTIONS
/OPTIONS=(keyword[,...])
/NOOPTIONS (default)
Specifies PRODUCT command options. Keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
SHOW_DISK_USAGE Displays estimated disk block usage. Both peak
utilization and net change are shown in addition
to the amount of free space available before and
after the operation.
/PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
/REMARK
/REMARK=string
Records a comment in the product database about the task you
are performing. The PRODUCT SHOW HISTORY command displays the
recorded comments. For each product, PCSI stores a chronological
list of tasks you perform and the associated remarks. The default
behavior is that no remark is recorded.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
/TRACE
/TRACE
/NOTRACE (default)
Identifies the creation and deletion of subprocesses and the DCL
commands and command procedures submitted to these subprocesses
for execution during the processing of the PRODUCT command.
Also shows the creation and deletion of scratch directories and
temporary files that the PCSI utility provides for the subprocess
environment. Any output that DCL produces is also displayed.
This qualifier is primarily a debugging aid for product
developers to trace the execution of command procedures included
in their product kits. See the POLYCENTER Software Installation
Utility Developer's Guide for more information.
/VERSION
/VERSION=version-number
Selects software products that have the specified version.
/WORK
/WORK=device:[directory]
Specifies the name of the device and directory acting as a
temporary work area. By default, temporary files are created
in subdirectories of the the user's login directory.
3 Example
$ PRODUCT REMOVE FTAM
The command in this example uninstalls the product named FTAM
and updates the product database to remove all information
about the product.
2 SHOW
Displays one of the following:
o A chronological log of operations performed on software
products (SHOW HISTORY)
o Information about objects created during a software product
installation (SHOW OBJECT)
o Information about installed products (SHOW PRODUCT)
o Information about installed patches that can be uninstalled
using the PRODUCT UNDO PATCH command (SHOW RECOVERY_DATA)
o Information about PCSI (SHOW UTILITY)
3 HISTORY
Displays a chronological log of operations performed on the
specified products.
Format
PRODUCT SHOW HISTORY product-name[,...] [/qualifiers]
4 Description
For each operation performed, the following information is
displayed:
o Name of the product
o Type of product kit: full LP, operating system, mandatory
update, partial, patch, platform, or transition
o Kit validation status
o Date of the operation
If you specify /FULL, the following additional information is
also included:
o Complete date and time of the operation
o Number of times the user chose to continue from an error
o Account name from which the operation was performed
o Any text found in the remark field
The kit validation status field (VAL) codes are the following:
Code Meaning
Val Kit was successfully validated.
Sys Kit was not validated, but it was installed from OS media
as part of an OpenVMS installation or upgrade.
(U) Kit was not validated because it was an unsigned kit and
therefore it did not have a manifest file created for it.
(M) Kit was not validated because its manifest file was not
found in the source directory.
(D) Kit was not validated because the validation feature was
explicitly disabled by the user.
(C) Kit was not validated because CDSA was not operational.
- Not applicable for the operation (such as product
removal).
<none> A blank entry indicates that the version of PCSI used to
perform the operation did not support the kit validation
feature or was running on a pre-V8.3 OpenVMS system.
4 Parameter
product-name
Names the product or list of products to include in the display.
This is an optional parameter. If you omit it, operations
performed on all products will be shown.
4 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=(base-system-name[,...])
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
Parentheses (()) are optional only when you specify a single
base system name. They are required when you specify multiple
base system names.
/BEFORE
/BEFORE=time
Selects entries that were created before the specified date and
time. You can specify time as an absolute time, as a combination
of absolute and delta times, or as one of the following keywords:
TODAY (default)
TOMORROW
YESTERDAY
For information about specifying time values, see the OpenVMS
User's Manual.
/FULL
/FULL
/NOFULL (default)
Displays information in 132-column format. The /NOFULL qualifier
displays a subset of available information in 80-column format.
/OPERATION
/OPERATION=(keyword[,...])
Specifies one or more of the following operations as the value
for keyword:
INSTALL
RECONFIGURE
REGISTER_PRODUCT
REGISTER_VOLUME
REMOVE
Parentheses (()) are optional only when you specify a single
keyword. They are required when you specify multiple keywords.
/PRODUCER
/PRODUCER=(producer-name[,...])
Selects software products that the specified manufacturer
produces.
Parentheses (()) are optional only when you specify a single
producer name. They are required when you specify multiple
producer names.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
/SINCE
/SINCE=time
Selects entries that were created on or after the specified
date and time. You can specify time as an absolute time, as
a combination of absolute and delta times, or as one of the
following keywords:
TODAY (default)
YESTERDAY
For information about specifying time values, the OpenVMS User's
Manual.
/USER
/USER=(username[,...])
Displays information about the products installed, configured, or
removed by the specified user.
Parentheses (()) are optional only when you specify a single
user name. They are required when you specify multiple user
names.
/VERSION
/VERSION=(version-number[,...])
Selects software products that have the specified version.
Parentheses (()) are optional only when you specify one version
number. They are required when you specify more than one version
number.
4 Example
$ PRODUCT SHOW HISTORY * /OPERATION=INSTALL /BEFORE=22-MAY-2002
The command in this example lists all the products that were
installed before May 22, 2002.
3 OBJECT
Displays information about objects created during a software
product installation. Examples of software objects are files,
directories, and modules in libraries.
Format
PRODUCT SHOW OBJECT object-name [/qualifiers]
4 Description
The standard display lists the name, type, generation number, and
status of each object. The expanded display, which you request
by using the /FULL qualifier, includes the destination root
directory and the product that owns the object.
Each file and library module object has an associated generation
number, either explicit or implied. A generation number is an
integer value in which the largest value in a comparison of
generation numbers denotes the object that supersedes the others.
The product developer specifies generation numbers to aid PCSI in
resolving conflict on installation when two or more products or
patch kits supply the same object. An explicit or implicit value
of zero means no generation information has been supplied. A tie
of non-zero generation numbers means the objects are identical
and that an object from a product kit should replace a previously
installed object. If all generation numbers in a comparison are
zero, the conflict cannot be resolved.
Each object has an installation status. A status of "OK" means
that the object is currently installed. A status of "Conflict"
indicates that the object lost a generation comparison with an
object of the same name supplied by another product or patch.
This is not an error condition. "OK/Adopt" indicates that a
product inherited the object from another product. This happens
only when a product loses an object conflict to another product,
and, subsequently, the other product is removed, causing the file
or module on the system to be adopted by the surviving product.
4 Parameter
object-name
Names the object or list of objects to include in the display.
This is an optional parameter. If you omit it, all objects for
the selected products will be shown. You can use the asterisk
(*) and the percent sign (%) wildcard characters to specify the
object-name.
The name of a file object includes its directory
specification relative to the destination root directory
for the installed product. For example, a file placed in
DISK$ALPHA:[VMS$COMMON.SYSEXE]TEST.EXE is identified in the
product database as the file object [SYSEXE]TEST.EXE.
4 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=(base-system-name[,...])
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
Parentheses (()) are optional only when you specify a single
base system name. They are required when you specify multiple
base system names.
/FULL
/FULL
/NOFULL (default)
Displays information in 132-column format. The /NOFULL qualifier
displays a subset of available information in 80-column format.
/PRODUCER
/PRODUCER=(producer-name[,...])
Selects software products that the specified manufacturer
produces.
Note that the PRODUCT SHOW HISTORY command allows you to specify
both the /PRODUCER and /PRODUCT qualifiers, which you need to
spell out because they are not unique within the first four
characters.
Parentheses (()) are optional only when you specify a single
producer name. They are required when you specify multiple
producer names.
/PRODUCT
/PRODUCT=(product-name[,...])
Selects products with the specified product name.
Note that the PRODUCT SHOW HISTORY command allows you to specify
both the /PRODUCER and /PRODUCT qualifiers, which you need to
spell out because they are not unique within the first four
characters.
Parentheses (()) are optional only when you specify a single
product name. They are required when you specify multiple product
names.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
/TYPE
/TYPE=(object-type[,...])
Selects one or more class of objects to display. Keywords are:
ACCOUNT Selects account objects.
DIRECTORY Selects directory objects.
FILE Selects file objects.
IMAGE_LIBRARY Selects image library objects.
LOADABLE_IMAGE Selects loadable image objects.
MODULE Selects module objects, including command
definition, help, macro, object, and text
library modules.
NETWORK Selects network objects.
RIGHTS_IDENTIFIER Selects rights identifier objects.
/VERSION
/VERSION=(version-number[,...])
Selects software products that have the specified version.
Parentheses (()) are optional only when you specify one version
number. They are required when you specify more than one version
number.
4 Example
$ PRODUCT SHOW OBJECT * /PRODUCT=ABC /FULL
The command in this example lists all objects such as files,
directories, library modules, and other objects that were
created when the product ABC was installed.
3 PRODUCT
Displays a list of software products installed on your system.
Use the /FULL qualifier to display additional information such as
kit type, maintenance activity, and software dependencies.
Format
PRODUCT SHOW PRODUCT product-name[,...] [/qualifiers]
4 Parameter
product-name
Names the product or list of products to include in the display.
This is an optional parameter. If you omit it, the names of all
installed products will be shown.
4 Qualifiers
/BASE_SYSTEM
/BASE_SYSTEM=(base-system-name[,...])
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
Parentheses (()) are optional only when you specify a single
base system name. They are required when you specify multiple
base system names.
/FULL
/FULL
/NOFULL (default)
Displays information in 132-column format. The /NOFULL qualifier
displays a subset of available information in 80-column format.
/MAINTENANCE
/MAINTENANCE=(product-name[,...])
Displays the products to which the named maintenance products
have been applied. A maintenance product is either a patch kit or
a mandatory update kit.
Parentheses (()) are optional only when you specify a single
product name. They are required when you specify multiple product
names.
To list all maintenance products that have been applied to a
particular product, use the following command:
PRODUCT SHOW PRODUCT product-name /FULL
/PRODUCER
/PRODUCER=(producer-name[,...])
Selects software products that the specified manufacturer
produces.
Parentheses (()) are optional only when you specify a single
producer name. They are required when you specify multiple
producer names.
/REFERENCED_BY
/REFERENCED_BY=(product-name[,...])
Displays products that are referenced by the named product.
Use this qualifier to show if the product, specified in the
/REFERENCED_BY qualifier, has a software dependency on the
product or products specified in the product-name parameter of
the SHOW PRODUCT command. If you specify an asterisk (*) as the
product name, all referenced products are listed for the product
named in the /REFERENCED_BY qualifier.
Parentheses (()) are optional only when you specify a single
product name. They are required when you specify multiple product
names.
To list all products that require a specified product to be
installed, use the command:
PRODUCT SHOW PRODUCT product-name /FULL /REFERENCED_BY=*
To list all products that are referenced by (that is, required
by) a particular product, use the command:
PRODUCT SHOW PRODUCT * /REFERENCED_BY=product-name
To list all products that are referenced by (that is, required
by) other products, use the command:
PRODUCT SHOW PRODUCT * /REFERENCED_BY=*
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
/SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
/VERSION
/VERSION=(version-number[,...])
Selects software products that have the specified version.
Parentheses (()) are optional only when you specify one version
number. They are required when you specify more than one version
number.
4 Example
$ PRODUCT SHOW PRODUCT * /REFERENCED_BY=DECNET_OSI
The command in this example lists all products on which the
DECnet-Plus product is dependent.
3 RECOVERY_DATA
Displays patch recovery data sets in chronological order,
starting with the set created most recently and ending with the
oldest one. Each recovery data set identifies one or more patches
that can be uninstalled.
Format
PRODUCT SHOW RECOVERY_DATA [/qualifiers]
4 Parameters
None.
4 Qualifiers
/BEFORE
/BEFORE=time
Selects recovery data sets created before the specified date and
time. You can specify time as an absolute time, as a combination
of absolute and delta times, or as one of the following keywords:
TODAY (default)
TOMORROW
YESTERDAY
For information about specifying time values, see the OpenVMS
User's Manual.
/FULL
/FULL
/NOFULL (default)
Displays information in 132-column format. The /NOFULL qualifier
displays a subset of available information in 80-column format.
/LOG
/LOG
/NOLOG (default)
Displays the file specifications of recovery data set files as
they are accessed.
/NEWEST
/NEWEST=count
Displays the most recently created patch recovery data sets. For
example, if you specify /NEWEST=2, the SHOW RECOVERY_DATA command
displays the two newest recovery data sets. If you do not specify
a number with this qualifier, the default value is 1.
/OLDEST
/OLDEST=count
Displays the oldest recovery data sets. For example, if you
specify /OLDEST=2, the SHOW RECOVERY_DATA command displays the
two oldest recovery data sets. If you do not specify a number
with this qualifier, the default value is 1.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects recovery data sets located on a privately mounted system
disk. By default, PCSI searches the currently booted system disk
for recovery data sets.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
/SINCE
/SINCE=time
Selects recovery data sets that were created on or after the
specified date and time. You can specify time as an absolute
time, as a combination of absolute and delta times, or as one of
the following keywords:
TODAY (default)
YESTERDAY
For information about specifying time values, see the OpenVMS
User's Manual.
4 Example
$ PRODUCT SHOW RECOVERY_DATA /SINCE=10-DEC-2002
The command in this example displays the recovery data sets
created on or after December 10, 2002, starting with the one
created most recently.
3 UTILITY
Displays the version of PCSI that you are using.
Format
PRODUCT SHOW UTILITY
4 Parameters
None.
4 Qualifiers
None.
4 Example
$ PRODUCT SHOW UTILITY
POLYCENTER Software Installation utility version: V8.3-134
Product Configuration File (PCF) support level: 1
Product Description File (PDF) support level: 10
Product Text File (PTF) support level: 2
Image Name: DISK$V83SYS:[SYS0.][SYSEXE]PCSI$MAIN.EXE;1
The command in this example shows the version of the PCSI
utility, its component support levels, and the full file
specification of the PCSI image that is executing the command.
2 UNDO
3 PATCH
Uninstalls patches or mandatory updates from your system. This
command uses the recovery data sets that were created by the
PRODUCT INSTALL command when these patches were installed. The
associated recovery data sets are deleted at the conclusion of
the operation.
Format
PRODUCT UNDO PATCH [/qualifiers]
4 Description
You can "undo" patches only in reverse chronological order of the
creation dates of their recovery data sets. Thus, if you install
patches A, B, and C with separate PRODUCT INSTALL commands,
and you want to "undo" patch B, the PRODUCT UNDO PATCH command
requires that patch C be removed along with patch B. To remove
complete products, including any patches or mandatory updates
that have been applied to them, use the PRODUCT REMOVE command
instead.
A recovery data set contains a copy of the directories, files,
and libraries that were modified or deleted by the execution
of a PRODUCT INSTALL command. In addition, a snapshot of the
product database is included, along with other information needed
to restore the software environment. Each recovery data set is
stored in a directory tree on the system device in [PCSI$UNDO_
nnn...], where nnn is a number from 001 to 999. The most recent
data set is number 001; all data sets are renumbered when a new
data set is added or deleted from the stack.
The PRODUCT INSTALL command creates a recovery data set when
patches (also known as remedial kits or ECOs) are installed
unless you disable this feature with the /NOSAVE_RECOVERY_
DATA qualifier. A recovery data set contains information about
all patches that are installed concurrently. The PRODUCT UNDO
command removes all the patches that are in the selected recovery
data sets. Therefore, if multiple patches are installed in one
operation, they can be removed only as a group.
You can use the PRODUCT SHOW RECOVERY_DATA command to list all
recovery data sets and find out which patches can be removed. To
delete unwanted recovery data sets, use the DELETE RECOVERY_DATA
command.
4 Parameters
None.
4 Qualifiers
/ALL
Uninstalls all patch and mandatory updates for which recovery
data has been saved. Once the operation completes, all the
recovery data sets are deleted and cannot be reused. If you do
not specify the /ALL, /NEWEST, or /SINCE qualifier, only the most
recently created recovery data set is used to select patches and
mandatory updates to remove.
/LOG
/LOG
/NOLOG (default)
Displays the file specifications of files as they are accessed;
also provides other information related to file activity. For
example, when logging is enabled, messages notify you when
product files, libraries, directories, and product database files
are created, deleted, or modified.
/NEWEST
/NEWEST=count
Selects the most recently created patch recovery data sets. For
example, if you specify /NEWEST=3, the PRODUCT UNDO PATCH command
uninstalls patches using data from the three newest recovery data
sets. If you do not specify a number with this qualifier, the
default value is 1.
/OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keyword is:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the recovery data sets that have been
selected for processing.
/REMOTE
/REMOTE
/NOREMOTE (default)
Selects recovery data sets located on a privately mounted system
disk and restores the product database to this disk. By default,
PCSI searches the currently booted system disk for recovery data
sets.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
/SINCE
/SINCE=time
Selects recovery data sets that were created on or after the
specified date and time. You can specify time as an absolute
time, as a combination of absolute and delta times, or as one of
the following keywords:
TODAY (default)
YESTERDAY
For information about specifying time values, see the OpenVMS
User's Manual.
/TRACE
/TRACE
/NOTRACE (default)
Identifies the creation and deletion of subprocesses and the DCL
commands and command procedures submitted to these subprocesses
for execution during the processing of the PRODUCT command.
Messages log the creation and deletion of scratch directories and
temporary files that the PCSI utility provides for the subprocess
environment. Any output that DCL produces is also displayed.
This qualifier is primarily a debugging aid for product
developers to trace the execution of command procedures included
in their product kits. See the POLYCENTER Software Installation
Utility Developer's Guide for more information.
4 Example
$ PRODUCT UNDO PATCH
The command in this example uninstalls all patch and mandatory
update kits that were installed in the last INSTALL operation
performed with the /SAVE_RECOVERY_DATA qualifier. The recovery
data set used in this operation is deleted at the end of the
operation and cannot be reused.