1 HELP
The HELP command invokes the HELP Facility to display
information about a command or topic. In response to the "Topic?"
prompt, you can:
o Type the name of the command or topic for which you need help.
o Type INSTRUCTIONS for more detailed instructions on how to use
HELP.
o Type HINTS if you are not sure of the name of the command or
topic for which you need help.
o Type HELP/MESSAGE for help with the HELP/MESSAGE command.
o Type a question mark (?) to redisplay the most recently requested
text.
o Press the Return key one or more times to exit from HELP.
You can abbreviate any topic name, although ambiguous abbreviations
result in all matches being displayed.
2 Parameters
keyword ...
Specifies one or more keywords that refer to the topic or subtopic
on which you want information from a HELP library. Information
within HELP libraries is arranged in a hierarchical manner. The
levels are:
1. None---If you do not specify a keyword, HELP describes the HELP
command and lists the topics that are documented in the root
library. Each item in the list is a keyword in the first level
of the hierarchy.
2. Topic-name---If you specify a keyword by naming a topic, HELP
describes the topic as it is documented in either the root
library or one of the other enabled default libraries. Keywords
for additional information available on this topic are listed.
3. Topic-name subtopic---If you specify a subtopic following a
topic, HELP provides a description of the specified subtopic.
4. @file-spec followed by any of the above---If you specify a HELP
library to replace the current root library, HELP searches that
library for a description of the topic or subtopic specified.
The file specification must take the same form as the file
specification included with the /LIBRARY command qualifier.
However, if the specified library is an enabled user-defined
default library, the file specification can be abbreviated to
any unique leading substring of that default library's logical
name translation.
If you use an asterisk in place of any keyword, the HELP command
displays all information available at the level that the asterisk
replaces. For example, HELP COPY * displays all the subtopics under
the topic COPY.
If you use an ellipsis immediately after any primary keyword, HELP
displays all the information on the specified topic and all
subtopics of that topic. For example, HELP COPY... displays
information on the COPY topic as well as information on all the
subtopics under COPY.
You can use percent signs and asterisks in the keyword as wildcard
characters.
2 /INSTRUCTIONS
/INSTRUCTIONS (default)
/NOINSTRUCTIONS
Controls whether the HELP command displays information on how to use
the HELP facility. By default, the HELP command display includes a
description of the facility and the format, along with the list of
topics. If you specify /NOINSTRUCTIONS, only the list of topics is
displayed.
2 /LIBLIST
/LIBLIST (default)
/NOLIBLIST
Displays auxiliary help libraries, where applicable. See text under topic
/USERLIBRARY for more information.
2 /LIBRARY
/LIBRARY=file-spec
/NOLIBRARY
Controls whether an alternate HELP library is used in place of the
default system library, SYS$HELP:HELPLIB.HLB. The specified library
is used as the main HELP library, and is searched for HELP
information before any user-defined default HELP libraries are
checked.
If you omit the device and directory specification, the default is
SYS$HELP, the logical name of the location of the system HELP
libraries. The default file type is HLB.
The /NOLIBRARY qualifier is used to exclude the default HELP library
from the library search order.
2 /MESSAGE
Displays descriptions of system messages.
Format
HELP/MESSAGE [/qualifier [...]] [search-string]
3 Parameter
search-string
Specifies a message identifier or one or more words from a
message's text. By default, HELP/MESSAGE displays a description
of the message produced by the last executed command (that is,
the message corresponding to the value currently stored in the
CLI symbol $STATUS).
The Help Message utility (MSGHLP) operates using the following
conventions:
o Words containing fewer than three alphanumeric characters are
ignored.
o Words can be specified in any order.
You can minimize search time by specifying the most unusual
word first.
o Nonalphanumeric characters are ignored in the search.
Exceptions are the percent sign (%) and hyphen (-) when
they prefix a message. Therefore, you can paste a full
message into the search string, provided you include these
special characters and delete any variables (such as file
names) that were inserted into the message.
If Help Message fails to find a pasted message in the database,
submit the command again and omit the leading special character,
facility, and severity. Some common messages are documented as
"shared" messages rather than facility-specific messages.
o Help Message matches all words that begin with the characters
specified in the search string. Use /WORD_MATCH=WHOLE_WORD to
specify that only whole words be matched.
3 Qualifiers
/BRIEF
Outputs the message text only.
/DELETE
/DELETE=filename.MSGHLP
Deletes all messages contained in the specified .MSGHLP file from
whichever of the following files is found first:
o A .MSGHLP$DATA file specified with the /LIBRARY qualifier
o The first .MSGHLP$DATA file in a search path specified by the
/LIBRARY qualifier
o SYS$HELP:MSGHLP$LIBRARY.MSGHLP$DATA (the default .MSGHLP$DATA file)
o The first .MSGHLP$DATA file in the default search path
(defined by logical name MSGHLP$LIBRARY)
You must have write access to Compaq supplied .MSGHLP$DATA files
to delete messages from the Compaq supplied database.
NOTE
If you create a .MSGHLP file by specifying a search string,
check the output .MSGHLP file to be sure the search did
not pick up any unexpected messages that you do not want to
delete from the database. Edit any such messages out of the
.MSGHLP file before you perform the delete operation.
/EXTRACT
/EXTRACT=filename.MSGHLP
Extracts messages from the database and generates a .MSGHLP file
that can be edited, if desired, and used as input for /INSERT and
/DELETE operations. /EXTRACT retrieves data from a .MSGHLP$DATA
file or logical search path specified by /LIBRARY or, by default,
from files in the search path defined by logical name MSGHLP$LIBRARY.
When /EXTRACT is not specified, Help Message produces output in
standard text format by default (see /OUTPUT).
/FACILITY
/FACILITY=?
/FACILITY=(facility-name [,...])
/FACILITY=ALL
Specifies which facilities in the database are to be searched
for a match.
Enter /FACILITY=? to output a list of all facilities in the
default database or in a database specified by /LIBRARY.
To narrow your search, specify one or more facility names
with /FACILITY. (Multiple facilities must be enclosed in
parentheses and be separated by commas.) Help Message then
outputs only matching messages produced by the specified
facility or facilities.
Specify /FACILITY=ALL to output messages for all facilities
in the database. /FACILITY=ALL is the default unless another
facility is implied; for example, specifying /STATUS or
defaulting to the value of the CLI symbol $STATUS automatically
identifies a specific facility. Similarly, cutting and pasting
a message that includes a facility name invalidates use of the
/FACILITY qualifier.
/FULL
/FULL (default)
Outputs the complete message description, including message
text, facility name, explanation, user action, and user-supplied
comment, if any.
/INSERT
/INSERT=filename.MSGHLP
! /INSERT=TT:
Updates the first of the following files to be found with new or changed
information from the specified .MSGHLP file:
! or, if TT: is specified,
! with the data entered immediately at the terminal:
o A .MSGHLP$DATA file specified with the /LIBRARY qualifier
o The first .MSGHLP$DATA file in a search path specified by the
/LIBRARY qualifier
o The first .MSGHLP$DATA file in the default search path
(defined by logical name MSGHLP$LIBRARY)
o SYS$HELP:MSGHLP$LIBRARY.MSGHLP$DATA (the default MSGHLP$DATA file)
You must have write access for the Compaq supplied .MSGHLP$DATA
files to insert data into these files. User-supplied data is
identified by change bars in Help Message output.
/LIBRARY
/LIBRARY=disk:[directory]filename.MSGHLP$DATA
/LIBRARY=disk:[directory]
/LIBRARY=logical-name
Defines the messages database for the current command to be
a particular .MSGHLP$DATA file, all the .MSGHLP$DATA files in
a specified directory, or all the files in a search path defined
by a logical name.
For most operations, the default database is either
SYS$HELP:MSGHLP$LIBRARY.MSGHLP$DATA or a search path
of .MSGHLP$DATA files defined by logical name MSGHLP$LIBRARY.
For /DELETE and /INSERT operations, the default database is
either SYS$HELP:MSGHLP$LIBRARY.MSGHLP$DATA or the first
file in a search path defined by logical name MSGHLP$LIBRARY.
/OUTPUT
/OUTPUT=filespec
Writes output to the specified file. By default, Help Message
writes output to SYS$OUTPUT, which is normally the terminal.
/PAGE
/PAGE (default for screen display)
/NOPAGE
Displays terminal output one screen at a time. The page length
is automatically set to 1 line less than the value specified
by SET TERMINAL/PAGE. (Use of /PAGE is incompatible with
/OUTPUT=filespec.)
/SECTION_FILE
/SECTION_FILE=*
/SECTION_FILE=file-spec
Identifies the specified message section file to the system so
that Help Message can interpret the $STATUS values for the
messages in that file. The default file specification is
SYS$MESSAGE:.EXE. Specifying /SECTION_FILE=* automatically
includes all OpenVMS-supplied message section files.
NOTE
The results of using this qualifier are entirely independent
from those created by the SET MESSAGE command. The Help
Message utility and Message utility do not interact. You must
separately code each utility to obtain the results you want.
/SORT
/SORT
/NOSORT (default)
Sorts output in alphabetical order. If a sort fails, retry the
operation using the /WORK_FILES qualifier.
/STATUS
/STATUS=status-code
/STATUS='symbol'
/STATUS='$STATUS' (default)
Outputs the message corresponding to the specified status code.
You can specify the status code with a decimal or hexadecimal
number or a symbol enclosed in apostrophes.
If a HELP/MESSAGE command does not include a search string, Help
Message by default outputs the message corresponding to the CLI
symbol $STATUS; that is, Help Message displays information on how
the last executed command completed.
You cannot specify a search string or /FACILITY with /STATUS.
/FACILITY is also illegal if you omit the search string and
default to /STATUS='$STATUS'.
/WORD_MATCH
/WORD_MATCH=INITIAL_SUBSTRING (default)
/WORD_MATCH=WHOLE_WORD
/WORD_MATCH=INITIAL_SUBSTRING matches all words that begin with
a word specified in the search string. The search string can
contain multiple words to be matched. Only messages that match
every word in the search string (in any order) are output.
/WORD_MATCH=WHOLE_WORD matches whole words only and refines your
search to the exact words specified. For example, an exact search
on ACC screens out dozens of other messages containing words that
begin with the letters ACC.
/WORK_FILES
/WORK_FILES=nn
/WORK_FILES=0 (default if qualifier is omitted)
/WORK_FILES=2 (default if qualifier is entered with no value)
Specifies that work files are to be used if the /SORT qualifier
is specified. You can specify a value from 0 to 10 for nn. This
qualifier has no effect if /SORT is not specified.
3 Examples
1. $ SHOW DEVICE KUDOS
%SYSTEM-W-NOSUCHDEV, no such device available
$ HELP/MESSAGE
The first command creates an error. The default HELP/MESSAGE
command (with no qualifiers) displays a description of the
SYSTEM facility message NOSUCHDEV.
2. $ HELP/MESSAGE ACCVIO
$ HELP/MESSAGE/BRIEF ACCVIO
$ HELP/MESSAGE/FACILITY=SYSTEM ACCVIO
$ HELP/MESSAGE VIRTUAL ACCESS
$ HELP/MESSAGE/STATUS=12
$ HELP/MESSAGE/STATUS=%XC
These commands demonstrate how you can use various qualifiers
to access and display the ACCVIO message (sometimes several!)
in different formats.
3. $ HELP/MESSAGE/BRIEF ACC
$ HELP/MESSAGE/BRIEF/WORD_MATCH=WHOLE_WORD ACC
In the first command, Help Message by default matches dozens of
words beginning with the string "ACC." The /WORD_MATCH=WHOLE_WORD
qualifier dramatically refines the search to match the exact word
only.
4. $ HELP/MESSAGE/FACILITY=(BACKUP,SHARED)/SORT/OUTPUT=MESSAGES.TXT
This command selects all messages issued by the BACKUP
facility and those messages documented as "Shared by several
facilities," alphabetizes them, and outputs them to a printable
file called MESSAGES.TXT.
By selecting the messages you want and directing them to a
file, you can create and print your own customized messages
documentation.
5. $ HELP/MESSAGE/EXTRACT=BADMESSAGE.MSGHLP BADMESSAGE
$ HELP/MESSAGE/DELETE=BADMESSAGE.MSGHLP-
_$ /LIBRARY=SYS$LOGIN:MYMESSAGES.MSGHLP$DATA
$ CONVERT SYS$LOGIN:MYMESSAGES.MSGHLP$DATA-
_SYS$LOGIN:MYMESSAGES.MSGHLP$DATA
$ PURGE SYS$LOGIN:MYMESSAGES.MSGHLP$DATA
$ HELP/MESSAGE/INSERT=BADMESSAGE.MSGHLP
The first command in this sequence extracts the hypothetical
message BADMESSAGE from the default database and outputs it to
file BADMESSAGE.MSGHLP.
The second command uses the BADMESSAGE.MSGHLP file to delete
the BADMESSAGE description from the MYMESSAGES.MSGHLP$DATA file
specified by the /LIBRARY qualifier.
The next two commands compress the MYMESSAGES.MSGHLP$DATA file
to save disk space after the deletion.
The last command uses the BADMESSAGE.MSGHLP file (possibly
an edited version at a later time) to insert the BADMESSAGE
message into the default .MSGHLP$DATA file.
6. $ HELP/MESSAGE/EXTRACT=NOSNO.MSGHLP NOSNO
$ EDIT/EDT NOSNO.MSGHLP
1NOSNO, can't ski; no snow
2XCSKI, XCSKI Program
3Your attempt to ski failed because there is no snow.
4Wait until there is snow and attempt the operation again.
5If you don't want to wait, go to a location where there is
5snow and ski there.
5
5Or, try ice skating instead!
[EXIT]
$ HELP/MESSAGE/INSERT=NOSNO.MSGHLP
This command sequence shows how users with write access to
Compaq supplied .MSGHLP$DATA files can add a comment to a
Compaq supplied message.
The first command extracts hypothetical message NOSNO to file
NOSNO.MSGHLP. The second command edits the .MSGHLP file to add
a comment at the end of the message. Each comment line, even
blank lines, includes a "5" prefix. The next command updates
the database by using NOSNO.MSGHLP to insert the updated
message into the default .MSGHLP$DATA file.
2 /OUTPUT
/OUTPUT[=file-spec]
/NOOUTPUT
Controls where the output of the command is sent. If you do not
enter the qualifier, or if you enter /OUTPUT without a file
specification, the output is sent to the current process default
output stream or device, identified by the logical name SYS$OUTPUT.
If you enter /OUTPUT with a partial file specification (for example,
/OUTPUT=[JONES]), HELP is the default file name and LIS the default
file type. If you enter a file specification, it may not include
any wildcard characters.
If you enter /NOOUTPUT, output is suppressed.
2 /PAGE
/PAGE (default)
/NOPAGE
Controls whether output to the screen stops after each screen full
("page") of information is displayed.
If you specify /NOPAGE, output continues until the information
display ends or until you manually control the scrolling.
2 /PROMPT
/PROMPT (default)
/NOPROMPT
Controls whether HELP initiates an interactive session once the
initial HELP request has been processed. If you specify /NOPROMPT,
HELP returns you to the DCL command level after displaying the
requested information.
If /PROMPT is in effect, one of four different prompts is displayed,
requesting you to specify a particular HELP topic or subtopic. Each
prompt represents a different level in the hierarchy of HELP
information. The four prompt levels are:
1. Topic?---The root library is the main library and you are not
currently examining HELP for a particular topic.
2. [library-spec] Topic?---The root library is a library other than
the main library and you are not currently examining HELP for a
particular topic.
3. [keyword] subtopic?---The root library is the main library and
you are currently examining HELP for a particular topic (and/or
subtopic).
4. A combination of 2 and 3.
When you encounter one of these prompts, you can enter any one of
the responses described below:
Response Action in the Current Prompt Environment
keyword[...] (1,2) Searches all enabled libraries for the
keyword. (3,4) Searches additional HELP
libraries for the current topic (and/or
subtopic) for the keyword.
@file-spec (1,2) Same as above, except that the library
keyword[...] specified by @file-spec is now the rootlibrary.
If the specified library does not exist, HELP
treats @file-spec as a normal keyword. (3,4)
Same as above, treats @file-spec as a normal
keyword.
? (1,2) Displays a list of topics available in the
root library. (3,4) Displays the list of
subtopics of the current topic (and/or
subtopics) for which HELP exists.
<RET> (1) Exits from HELP. (2) Changes root library
to main library. (3,4) Prompts for a topic or
subtopic at the next higher level.
<Ctrl/Z> (1,2,3,4) Exits from HELP.
2 /USERLIBRARY
/USERLIBRARY=(table[,...])
/NOUSERLIBRARY
Controls whether HELP searches one or more user-specified root
libraries after it has searched the root HELP library.
When you specify the /USERLIBRARY qualifier, HELP searches the
process, group, and system logical name tables for logical names of
the form: HLP$LIBRARY, HLP$LIBRARY_1, HLP$LIBRARY_2, and so on, to
find the file specifications of any user-defined libraries. When
HELP searches for information on a given topic, it proceeds in the
following search order: root library, main library (if not the same
as the root library), process libraries, group libraries, system
libraries, and root library. If the search fails, the root library
is searched a second time so that the context is returned to the
root library from which the search was initiated.
If you specify only one table for HELP to search, you can omit the
parentheses. You can specify any of the following tables or
keywords:
ALL HELP searches the process, group, and system logical name
tables for user-defined library definitions.
NONE HELP does not search any of the logical name tables. This
specification is the same as /NOUSERLIBRARY.
PROCESS HELP searches the process logical name table for
user-defined library definitions.
GROUP HELP searches the group logical name table for user-defined
library definitions.
SYSTEM HELP searches the system logical name table for
user-defined library definitions.
By default, if you omit the qualifier, /USERLIBRARY=ALL is assumed.
2 Examples
1. $ HELP
HELP
.
. (HELP message text and list of topics)
.
Topic?
Issuing the HELP command without any qualifiers or parameters
produces a display of the HELP topics available from the root HELP
library, SYS$HELP:HELPLIB.HLB.
If you type one of the listed topics in response to the Topic?
prompt, HELP displays information about that topic and a list of
subtopics (if there are any). If one or more subtopics exist, HELP
will prompt you for a subtopic.
Topic? ASSIGN
ASSIGN
.
. (HELP message text and subtopics)
.
ASSIGN Subtopic?
If you type a subtopic name, HELP displays information about that
subtopic:
ASSIGN Subtopic? Name
ASSIGN
Name
.
. (HELP message text and subtopics, if any)
.
ASSIGN Subtopic?
If one or more sub-subtopics exist, HELP will prompt you for a
sub-subtopic; otherwise, as in the above example, the facility will
prompt you for another subtopic of the topic you are currently
inspecting.
Typing a question mark will redisplay the HELP message and options
at your current level. Pressing the Return key will either: (1) move you
back to the previous HELP level if you are in a subtopic level, or
(2) terminate HELP if you are at the first level. Pressing Ctrl/Z
terminates HELP at any level.
2. $ HELP FILL
Sorry, no documentation on FILL
Additional information available:
.
. (list of first-level topics )
.
Topic? @EDTHELP FILL
FILL
.
. (FILL HELP message)
.
@EDTHELP Topic?
When you issue a request for HELP on a topic that is not in the
default HELP library, you can instruct HELP to search another HELP
library for the topic. In this example, entering the command
@EDTHELP FILL instructs HELP to search the HELP library
SYS$HELP:EDTHELP.HLB for information on FILL, an EDT editor command.
HELP displays the message and prompts you for another EDT editor
topic.