1  DELETE
 

2  DEVICE
   Allows you to remove a device from the the permanent list.

   Requires SYSPRV privilege.

   Format

     DELETE DEVICE  device-name:
 

3  Parameters
 

device-name:

   The name of the device whose characteristics are to be deleted.
   The device name has the form ddcu,

   where:

   dd    is the device code-for example, LP. (The driver name
         corresponds to the device code; in this case, the driver
         name would be SYS$LPDRIVER.)

   c     is the controller designation A through Z; unless UCM
         specifies a different letter, all USB devices are A.

   u     is the unit number (0 through 9999).

   OpenVMS device names are made up of the two-character device
   code, followed by the controller designation, the unit number
   (which can be 1 to 4 characters long), and, finally, a colon (:).
 

3  Example

 $  UCM
 Universal Serial Bus Configuration Manager, Version V1.0
 UCM> SHOW DEVICE /PERMANENT AGA0:
 DEVICE
 DEVICE_TYPE                     PERMANENT
 DEVICE_NAME_ROOT                AGA
 UNIT_NUMBER                     0
 BUS                             1
 PATH                            1.0.0.0.0.0
 END_DEVICE

 UCM> DELETE DEVICE AGA0:
 UCM> SHOW DEVICE /PERMANENT AGA0:
 %USB-E-NOSUCHDEV, Device name or device unit not found
 UCM>

     In this example, the first SHOW DEVICE AGA0: command displays
     information about the device that is in the permanent list.
     After the DELETE DEVICE AGA0: command, the second SHOW DEVICE
     AGA0: command displays an error message indicating that the
     device is no longer in the permanent list.