1  ENABLE
 

2  LOG
   Enables or disables the display of all protocol commands sent to
   the remote host.

   Default: DISABLE LOG.

   DCL Format

     ENABLE LOG

     DISABLE LOG

   UNIX Format

     debug
 

3  Example

 FTP> ENABLE LOG
 Bell off.
 Debugging on (debug=1).
 FTP> ENABLE REPLY
 Reply on.
 Verbose mode on.
 FTP> PUT PRICES.TXT YEAR.PRICES
 ---> PORT 1,2,3,4,7,138
 200 PORT command successful.
 ---> STOR PRICES.TXT
 150 Opening ASCII mode data connection for small.txt (1,2,3,4,7,138).
 226 Transfer complete.
 local: WORK1$:[samson]prices.txt;1  remote: year.prices
 609 bytes sent in 00:00:00.02 seconds (179.36 Kbytes/s)
 FTP> GET LAKE.IBIS LAKE_IBIS.DAT
 ---> PORT 1,2,3,4,7,138
 200 PORT command successful
 ---> RETR lake.ibis
 150 Opening ASCII mode data connection for lake.ibis (1.2.3.4,193)
 226 Transfer complete
 local: LAKE_IBIS.DAT remote:lake.ibis
 4 bytes received in 00:00:00.03 seconds (0.13 Kbytes/s)
 FTP>

     Turns on the display of commands sent to the remote host. Shows
     all the commands sent to the remote host during the execution
     of PUT and GET.
 

2  PARSE
   Enables or disables the expansion of remote file names during
   file transfers.

   o  PUT operations: expansion is done by the local host.

   o  GET operations: expansion is done on the remote host.

   During GET operations, an expansion of a directory name might
   be different from the expansion of other file names. The result
   depends on the operating systems of the remote and local hosts.

   DCL Format

     ENABLE PARSE

     DISABLE PARSE

   UNIX Format

     glob
 

3  Examples

   1.FTP> ENABLE PARSE
     FTP> PUT BIRDS*.TXT

     Enables parsing and the expansion of wildcards. Copies all
     local files starting with the characters BIRDS and ending with
     .TXT to the remote host.

   2.FTP> ENABLE PARSE
     FTP> GET *.DOC

     Because parsing is enabled, the remote host expands the
     wildcard. All remote files ending in .DOC are copied to the
     local system.

     The command is equivalent to the following:

       FTP> ENABLE PARSE
       FTP> MGET *.DOC
 

2  PORT_COMMAND
   Enables or disables the sending of the FTP protocol PORT command
   to the remote host.

   By default, FTP sends a PORT command when establishing a
   connection. If this command fails, FTP uses the default data
   port (20).

   Disable the sending of the PORT command when you communicate with
   remote hosts that ignore PORT commands.

   Default: ENABLE PORT_COMMAND.

   DCL Format

     ENABLE PORT_COMMAND

     DISABLE PORT_COMMAND

   UNIX Format

     sendport
 

3  Example

 FTP> ENABLE PORT_COMMAND
 FTP> PUT CODE.TXT
 200 PORT command successful
 150 Opening data connection for CODE.TXT (130.180.10.8,1182)
 226 Transfer complete
 local: DISK$PROJECT6:[MANAGEMENT]CODE.TXT;9  remote: CODE.TXT
 3634 bytes sent in 00:00:00.04 seconds (88.72 Kbytes/s)

     FTP enters a PORT command before the file transfer.
 

2  REPLY
   Enables or disables the display of all responses from the remote
   host.

   Default: ENABLE REPLY.

   DCL Format

     ENABLE REPLY

     DISABLE REPLY

   UNIX Format

     debug
 

3  EXAMPLES

   1.FTP> ENABLE REPLY
     Reply on.
     Verbose mode on.
     FTP> get birds.txt dogs.txt
     200 PORT command successful.
     150 Opening ASCII mode data connection for birds.txt (130,180,10,8,1570)
     (2405 bytes).
     226 Transfer complete.
     local: WORK1$:[SAMSON]DOGS.TXT;1  remote: birds.txt
     2405 bytes received in 00:00:00.03 seconds (60.22 Kbytes/s)
     FTP>

     Enables the display of all the responses from the remote
     host. Copies birds.txt from the remote host to the local file
     dogs.txt, and shows all the executed FTP commands in progress.

   2.FTP> DISABLE REPLY
     Bell off.
     Reply off.
     Verbose off.
     FTP> get birds.txt dogs.txt
     FTP>

     Disables the display of all the responses from the remote host.
     Copies birds.txt from the remote host.
 

2  TRANSFER_VERIFICATION
   Enables or disables the display of # for each 1000 bytes of
   transferred data.

   Default: DISABLE TRANSFER_VERIFICATION.

   DCL Format

     ENABLE TRANSFER_VERIFICATION

     DISABLE TRANSFER_VERIFICATION

   UNIX Format

     hash
 

3  Example

 FTP> ENABLE TRANSFER_VERIFICATION
 Bell off.
 Hash mark printing on (1024/hash mark).
 FTP> GET FUTURES.DIS FUTURES_H2.DIS
 200 PORT command successful
 150 Opening data connection for futures.dis (11.20.99.100,26)
 ###############
 226 Transfer complete.
 local: FUTURES_H2.DIS remote: futures.dis
 15596 bytes received in 00:00:00.11 seconds (138.45 Kbytes/s)
 FTP>

     Enables the display of # for each 1000 bytes of transferred
     data. Copies futures.dis to FUTURES_H2.DIS, showing when 1000
     bytes are transferred.
 

2  VMS_PLUS
   Enables or disables VMS Plus Mode. This lets you specify a
   transfer mode based on file type (for example, ASCII or image).

   With VMS Plus Mode disabled, FTP does not send the FTP command
   SITE. (Older implementations of the FTP server do not support
   this command.) The FTP client uses the SITE command to identify
   itself (its SITE type) to the remote host. The SITE type of an
   FTP client can be one of the following:

   o  +VMS+ - The client is in VMS Plus mode.

   o  NONE - The client is not in VMS Plus mode.

   Defaults:

   o  When you use FTP to connect to an OpenVMS host running TCP/IP
      Services, VMS Plus Mode is enabled.

   o  When you use FTP to connect to a non-OpenVMS host or to an
      Open VMS system running software that does not recognize VMS
      Plus Mode, VMS Plus Mode is disabled.

   DCL Format

     ENABLE VMS_PLUS

     DISABLE VMS_PLUS

   UNIX Format

     There is no UNIX equivalent for the ENABLE or DISABLE VMS_PLUS
     command.