1  DISABLE
 

2  LOG
   Turns off the display of FTP commands sent to the remote host.

   Default: DISABLE LOG.

   DCL Format

     DISABLE LOG

   UNIX Format

     debug
 

3  Examples

   1.FTP> DISABLE LOG
     FTP> PUT IBIS.TXT
     200 PORT command successful
     150 Opening data connection for IBIS.TXT. (130.180.4.10,1165)
     226 Transfer complete
     local: USER3:[DIBBLE]IBIS.TXT;3 remote: IBIS.TXT
     4 bytes sent in 00:00:00.02 seconds (0.19 Kbytes/s)

     Turns off the display of commands sent to the remote host.
 

2  PARSE
   Disables the expansion of file name specifications during GET and
   PUT operations. File name arguments are taken literally and not
   expanded.

   During PUT operations, the expansion is done by the local host.

   DCL Format

     DISABLE PARSE

   UNIX Format

     glob
 

2  PORT_COMMAND
   Turns off the sending of the PORT FTP command to the remote FTP
   host.

   By default, FTP sends a PORT protocol command when establishing a
   connection for each data transfer. If the PORT command fails, FTP
   uses the default data port (20).

   Disable the PORT command when communicating with certain FTP
   implementations that ignore PORT commands.

   DCL Format

     DISABLE PORT_COMMAND

   UNIX Format

     sendport
 

2  REPLY
   Turns off the display of all responses from the remote host.

   Default: ENABLE REPLY.

   DCL Format

     DISABLE REPLY

   UNIX Format

     debug
 

2  TRANSFER_VERIFICATION
   Disables the display of the pound sign (#) for each 1K bytes of
   data transferred over the network.

   Default: DISABLE TRANSFER_VERIFICATION

   DCL Format

     DISABLE TRANSFER_VERIFICATION

   UNIX Format

     hash
 

2  VMS_PLUS
   Turns off VMS Plus Mode. This lets you specify a transfer mode
   based on file type (for example, ASCII or image).

   Disables the sending of the FTP SITE command for older
   implementations of the FTP server, which do not support the SITE
   command. The FTP client uses the FTP SITE command to identify
   itself (its SITE type) to the remote host. The SITE type of an
   FTP client can be one of the following:

   o  +VMS+-the client is in VMS Plus mode

   o  NONE-the client is not in VMS Plus mode

   Defaults:

   o  When you FTP to an OpenVMS host, VMS Plus Mode is enabled.

   o  When you FTP to a non-OpenVMS host, VMS Plus Mode is disabled.

   Format

     DISABLE VMS_PLUS