1 disable Many entities have a status attribute called state, whose value reflects the current operational state of the entity. The value of state is usually either: off The entity is disabled. In this state the entity exists and can be manipulated in various ways (for example, by having its characteristics modified), but will not perform its primary functions. on The entity is enabled. In this state the entity is fully operational. Use the disable command to place the entity in its disabled (off) state. Many entities do not permit you to modify their characteristics while they are enabled, so you must use the disable command before using the add, remove, or set commands. Also, it is often the case that you cannot delete an entity while it is enabled, so you must use the disable command before using the delete command. For example, ncl> disable modem connect line line-1 disables the entity to suspend its operation temporarily and suspends operation of the corresponding physical line. 2 alias_(OpenVMS) 3 port disable [node node-id] alias port port-name 2 csma-cd 3 station disable [node node-id] csma-cd station station-name Example: disable csma station csmacd-1 2 ddcmp_(OpenVMS_VAX) 3 link disable [node node-id] ddcmp link link-name Example: disable ddcmp link ddcmp-0 4 logical_station disable [node node-id] ddcmp link link-name - logical station station-name Example: disable ddcmp link ddcmp-0 logical station ddcmp-0 2 dns 3 clerk disable [node node-id] dns clerk This command stops the DECdns clerk on the specified node, causing all active communication with any DECdns server to be aborted and all client calls in progress to fail with an error. You can also enter this command through the dns$control utility. The clerk cache is copied to disk. When this procedure has completed, the clerk's State attribute is set to off. You must have the NET$MANAGE rights identifier (OpenVMS systems) or superuser privileges (Tru64 Unix systems). NOTE If you are disabling a clerk on a node where a server is running, make sure you disable the server first. The following command halts the DECdns clerk running on node .mfg.miranda: disable node .mfg.miranda dns clerk 3 server disable [node node-id] dns server Stops the DECdns server on the specified node. The server is disabled after all transactions in process have completed. When this procedure is completed, the server's State attribute is set to off. You can also enter this command through the dns$control utility. You must have the NET$MANAGE rights identifier (OpenVMS systems) or superuser privileges (Tru64 Unix systems). The following command halts the DECdns server running on the .eng.abc node: disable node .eng.abc dns server 4 clearinghouse disable dns server clearinghouse clearinghouse-name Disables the specified clearinghouse. HP recommends that you issue this command locally only. When this procedure is completed, the State attribute is set to Off. You can also enter this command through the dns$control utility. You must have the NET$MANAGE rights identifier (OpenVMS systems) or superuser privileges (Tru64 Unix systems). The following command disables the .ny_ch clearinghouse on the local node: disable dns server clearinghouse .ny_ch 2 dtss disable [node node-id] dtss 2 event_dispatcher disable [node node-id] event dispatcher 3 outbound_stream Disables an event dispatcher outbound stream entity which represents an outgoing connection to a sink on a local or remote node. disable [node node-id] event dispatcher - outbound stream simple-name [method disable-method] The optional Method argument specifies whether an existing connection should be aborted immediately or shut down in an orderly fashion. The disable methods are: abort The stream calls the disconnect operation to abort the connection immediately. orderly The stream calls the shutdown operation to perform an orderly shutdown of the connection. This is the default method. Examples: disable event dispatcher outbound stream local_stream disable event dispatcher - outbound stream local_stream method abort 4 Exception_Messages o incomplete Orderly disable could not be completed due to lack of transport confidence. 3 relay disable [node node-id] event dispatcher relay 4 logging Transitions the state of the specified logging entity to off. disable [node node-id] event dispatcher - relay logging logging-type Examples: disable event dispatcher relay logging console disable event dispatcher relay logging monitor disable event dispatcher relay logging file 3 sink disable [node node-id] event dispatcher sink simple-name Example: disable event dispatcher sink local_sink 2 fddi 3 station disable [node node-id] fddi station station-name Example: disable fddi station fddi-1 4 link disable [node node-id] fddi station station-name - link link-index OpenVMS Example: disable fddi station fddi-0 link 0 Tru64 UNIX Example: disable fddi station fddi-1 link 1 5 Exception_Messages o invalid item list format (OpenVMS) Confirm that latest LAN driver patch kit from OpenVMS has been installed. o return data corrupt or incorrectly encoded on remote system (OpenVMS) Confirm that latest LAN driver patch kit from OpenVMS has been installed on both the local and remote systems. 4 phy_port disable [node node-id] fddi station station-name - phy port port-index OpenVMS Example: disable fddi station fddi-0 phy port 0 Tru64 UNIX Example: disable fddi station fddi-1 phy port 1 5 Exception_Messages o invalid item list format (OpenVMS) Confirm that latest LAN driver patch kit from OpenVMS has been installed. o return data corrupt or incorrectly encoded on remote system (OpenVMS) Confirm that latest LAN driver patch kit from OpenVMS has been installed on both the local and remote systems. 2 frame_(OpenVMS) disable [node node-id] frame 3 link disable [node node-id] frame link frame-link-id Example: disable frame link frame-0 2 hdlc 3 link disable [node node-id] hdlc link link-name Example: disable hdlc link hdlc-0 4 logical_station disable [node node-id] hdlc link link-name - logical station logical-station-name Example: disable hdlc link hdlc-0 logical station hdlc-0 2 lapb 3 link disable [node node-id] lapb link simple-name Example: disable lapb link link-0 2 llc2 3 sap disable [node node-id] llc2 sap simple-name Example: disable llc2 sap sap-0 4 link disable [node node-id] llc2 sap simple-name - link simple-name Example: disable llc2 sap sap-0 link dte-1 2 modem_connect 3 line disable [node node-id] modem connect line line-name Example: disable modem connect line DSY-0-0 2 mop disable [node node-id] mop 3 circuit Removes a set of MOP service functions from the specified MOP circuit. disable [node node-id] mop circuit circuit-name - functions {function[,function...]} The Functions argument is required for the disable mop circuit commands. The MOP Circuit Functions include: configuration monitor load server console requester loop requester dump server query requester load requester (Tru64 UNIX) test requester Examples: disable mop circuit csmacd-1 - functions {configuration monitor} disable mop circuit fddi-1 - functions {dump server, load server} 2 ncl 3 logging disable ncl logging This will discontinue the logging of ncl commands to the NCL log file. This logging was established earlier in the NCL session with the "set ncl logfile" and "enable ncl logging" commands. To determine the name of the log file, use the "show ncl logfile" command. For example, on OpenVMS: NCL>set ncl logfile test NCL>enable ncl logging NCL>show all NCL>disable ncl logging NCL>show ncl logfile Logfile name is: test Logfile is Disabled The results will be in the file TEST.NCL. That file will contain the logged NCL command(s), and the output will be commented out. You may then reissue the command(s) you logged by: NCL>do test.ncl 3 uid_display_(Tru64_UNIX) By default, unique identification (UID) values are not displayed in NCL output. Use the enable ncl uid display command if you wish to see this attribute displayed. Use the following command to turn UID displays back off: disable ncl uid display For more information, refer to HELP NCL OUTPUT DISPLAYING_UIDS. 2 function disable [node node-id] function function-arg Example: disable function address watcher Disables node entity functions as specified by the function-arg. Possible function-arg values are: address Disabling this function causes the state attribute watcher to be set to off, but the node can still respond to management through its CMIP interface. The disable function is only supported on OpenVMS. CMIP Enabled automatically by the software. This listener function permits the node to respond to management through its CMIP listener interface. The CMIP listener function is only supported on OSF/1. 2 nsp disable [node node-id] nsp 2 osak Puts the OSAK entity in the NotAvailable state in which it does not accept any more inbound or outbound association requests, and existing associations are aborted. If the OSAK entity is already in the NotAvailable state, the command has no effect. disable [node node-id] osak 2 osi_transport disable [node node-id] osi transport 2 routing disable [node node-id] routing 3 circuit disable [node node-id] routing circuit circuit-name Example: disable routing circuit csmacd-1 4 ip_reachable_address disable [node node-id] routing circuit circuit-name - ip reachable address simple-name 4 reachable_address disable [node node-id] routing circuit circuit-name - reachable address simple-name Example: disable routing circuit csmacd-1 reachable address to-bulean 3 egp_group disable [node node-id] routing egp group group-name 4 egp_neighbor disable [node node-id] routing egp group group-name - egp neighbor neighbor-name 2 session_control disable [node node-id] session control 2 token_ring_(Tru64_UNIX) disable [node node-id] token ring station station-name 2 x25_access disable [node node-id] x25 access 3 application disable [node node-id] x25 access - application application-name Example: disable x25 access application X25_MAIL 2 x25_client_(OpenVMS) disable [node node-id] x25 client 2 x25_protocol disable [node node-id] x25 protocol dte dte-name Example: disable x25 protocol dte dte-1 2 x25_relay_(Alpha) 3 client disable [node node-id] x25 relay client client-name 3 pvc disable [node node-id] x25 relay pvc pvc-name 2 x25_server disable [node node-id] x25 server 3 client disable [node node-id] x25 server client simple-name 2 xot_(OpenVMS_Alpha) 3 sap disable [node node-id] xot sap sap-name Disables a Service Access Point (SAP) subentity of the X.25 Over TCP/IP (XOT) module. The sap-name is a simple name which uniquely identifies a particular SAP instance. Example: disable xot sap sap-0 4 link disable [node node-id] xot sap sap-name link link-name Disables XOT communications with a particular remote system identified by the LINK's remote IP addres and remote RFC1613 port number. The sap-name and link-name are simple names which uniquely identify particular SAP and LINK instances. Example: show xot sap sap-0 link * remote ip addr disable xot sap sap-0 link link-0