! *** PREDECLARED TYPES
     
      %IF %DECLARED ( %BASIC$QUADWORD_DECLARED ) = 0 %THEN
         RECORD BASIC$QUADWORD
            LONG FILL ( 2 )
         END RECORD
         %LET %BASIC$QUADWORD_DECLARED = 1
      %END %IF
     
      %IF %DECLARED ( %BASIC$OCTAWORD_DECLARED ) = 0 %THEN
         RECORD BASIC$OCTAWORD
            LONG FILL ( 4 )
         END RECORD
         %LET %BASIC$OCTAWORD_DECLARED = 1
      %END %IF
     
      %IF %DECLARED ( %BASIC$HFLOAT_AXP_DECLARED ) = 0 %THEN
         RECORD BASIC$HFLOAT_AXP
            LONG FILL ( 4 )
         END RECORD
         %LET %BASIC$HFLOAT_AXP_DECLARED = 1
      %END %IF
     
      %IF %DECLARED ( %BASIC$F_FLOATING_COMPLEX_DECL ) = 0 %THEN
         RECORD BASIC$F_FLOATING_COMPLEX
            SINGLE REAL_PART
            SINGLE IMAGINARY_PART
         END RECORD
         %LET %BASIC$F_FLOATING_COMPLEX_DECL = 1
      %END %IF
     
      %IF %DECLARED ( %BASIC$D_FLOATING_COMPLEX_DECL ) = 0 %THEN
         RECORD BASIC$D_FLOATING_COMPLEX
            DOUBLE REAL_PART
            DOUBLE IMAGINARY_PART
         END RECORD
         %LET %BASIC$D_FLOATING_COMPLEX_DECL = 1
      %END %IF
     
      %IF %DECLARED ( %BASIC$G_FLOATING_COMPLEX_DECL ) = 0 %THEN
         RECORD BASIC$G_FLOATING_COMPLEX
            GFLOAT REAL_PART
            GFLOAT IMAGINARY_PART
         END RECORD
         %LET %BASIC$G_FLOATING_COMPLEX_DECL = 1
      %END %IF
     
      %IF %DECLARED ( %BASIC$H_FLOAT_AXP_CMPLX_DCL ) = 0 %THEN
         RECORD BASIC$H_FLOATING_COMPLEX_AXP
            BASIC$HFLOAT_AXP REAL_PART
            BASIC$HFLOAT_AXP IMAGINARY_PART
         END RECORD
         %LET %BASIC$H_FLOAT_AXP_CMPLX_DCL = 1
      %END %IF
    
    
    ! +
    ! 
    !  Power Control Definitions
    ! 
    !  **** NOTE ****
    ! 
    !         New items must always be added to the END of each item list
    !         (preceeding the ENDlistname item) so that users will not have
    !         to recompile.
    ! -
      DECLARE LONG CONSTANT POWER$C_HIGH_PERF = 0
      DECLARE LONG CONSTANT POWER$C_LOW_POWER = 1
      DECLARE LONG CONSTANT POWER$C_EFFICIENCY = 2
      DECLARE LONG CONSTANT POWER$C_OS_CONTROL = 3  !  Only works from kernel mode
      DECLARE LONG CONSTANT POWER$M_OS_CONTROL_OFF = 4  !  OR with the above. Only works from kernel mode