1 CREATE 2 SERVICE Creates a service for a specified device or partition. Usage Rules: o All devices must be mounted systemwide to prevent them from being dismounted when a process logs out. o A device that has read/write service must be mounted /FOREIGN so that it is not visible to OpenVMS. o A device that has read-only service must be mounted either /NOWRITE or /FOREIGN to OpenVMS so that no one can change it locally. o A partition can be served off a disk mounted for either read- only or read/write access to OpenVMS. o Support for partitions is limited in this release. Format CREATE SERVICE serviceName device-or-partitionName 3 Parameters serviceName The name by which the service is known to the local area network. The service name can consist of alphanumeric characters and dollar signs ($). It can be 255 characters or fewer in length. device-or-partitionName The device or partition name is the name of the OpenVMS disk device or partition being served to the local area network. The name of the device or partition must have been created previously. Explanations of device and partition names follow. o Device names Devices served to the local area network are OpenVMS disk devices; use OpenVMS device names when you specify an InfoServer device name. A disk specification must end with a colon. o Partition names Partitions are container files that are served to the network. As such, they have OpenVMS file names with a default file type of ".ESS$PARTITION". Partition names, including the device, directory, and file name, can be no more than 242 characters in length. Support for partitions is limited in this version. HP strongly suggests that you use LD devices to support partitioned hard drives. See the DCL command LD HELP for more information. 3 Qualifiers /CLASS /CLASS=className Specifies a subset of the complete LASTport Disk (LAD) name space. The purpose of class names is to subdivide name spaces so that clients see only those names that are meaningful to them. The use of class names also allows two services to have the same name and not conflict with one another. You can, for example, use different class names for different on-disk structures that several client systems use. You might use SERVICEA/CLASS=ODS-2 for some client systems and SERVICEA/CLASS=ISO_9660 for other client systems. The service has the same name, SERVICEA, but the class names are different. The class name you use depends upon the client systems that will connect to the service being created. The default class name is ODS_2. For example, OpenVMS systems use the ODS_2 name space when attempting to mount an InfoServer device. Note that OpenVMS clients can solicit only those services that are in the ODS_2 service class. Valid class names are the following: V2.0 Names understood by PCSA MS-DOS Clients Unformatted Virtual disk has no format MSDOS MSDOS virtual disks ODS_2 VMS virtual disks UNIX UNIX virtual disks ISO_9660 ISO 9660 CD format HIGH_SIERRA MS-DOS CD format APPLE Macintosh HFS format SUN Sun format /ENCODED_PASSWORD /ENCODED_PASSWORD=hexstring The SAVE command creates this qualifier. Because passwords are not stored in plain text, the hashed password value is written out as part of the SAVE operation so that the service can be recreated without revealing the password. Note that if you edit the command procedure that the SAVE command creates and change the service name, the encoded password value is no longer valid. You need to set another password on the service using the /PASSWORD qualifer. /PASSWORD /PASSWORD=passwordString /NOPASSWORD (default) Specifies an optional access control password for the service. The client system must specify the password to access the service. The password string can be up to and including 39 alphanumeric ASCII characters in length. If no password is specified, the client system is not required to provide a password to access the service. The text password is hashed and stored in encrypted form in memory with the other service information. /RATING /RATING=DYNAMIC /RATING=STATIC=value Clients use the service rating to select a service in the case of multiple matching services. The service with the highest service rating is selected. The system adjusts the dynamic service rating based on load. You can also set a static rating between 0 and 65535. The system does not adjust static ratings. One use of static ratings is to migrate clients from one copy of a service to another. If you set a static rating of 0 on services you want to migrate clients away from, no new clients will connect to a 0-rated service; instead, they will connect to higher-rated services. When all current clients have disconnected from a service, you can safely delete it. /READAHEAD /READAHEAD (Default) /NOREADAHEAD When a disk read is required to fill a cache block, /READAHEAD specifies that the read is to be from the first block requested to the end of the bucket boundary. Readahead can speed up sequential operations by pre-loading disk blocks that are needed into the cache. If you specify both /READAHEAD and /READBEHIND, any block requested within a cache bucket causes the entire bucket range of blocks to be read into the cache. /READBEHIND /READBEHIND /NOREADBEHIND (default) When a disk read is required to fill a cache block, /READBEHIND specifies that the read is to include all blocks from the beginning of the cache bucket boundary up to and including the requested blocks. If you specify both /READAHEAD and /READBEHIND, any block requested within a cache bucket causes the entire bucket range of blocks to be read into the cache. /READERS /READERS=number (default READERS 1000) /NOREADERS Specifies the maximum number of simultaneous client connections allowed for read access. The default is 1000 readers. A value of 0 indicates write-only access. If a client requests read-only or read/write access to a service, the system counts this as one reader. /WRITERS /WRITERS /NOWRITERS (default) Specifies that the service is to allow access to a single writer. 3 Examples 1.$ SHOW DEVICE MOVMAN$DQA0:/full Disk MOVMAN$DQA0:, device type Compaq CRD-8322B, is online, file-oriented device, shareable, served to cluster via MSCP Server, error logging is enabled. Error count 0 Operations completed Owner process "" Owner UIC [SYSTEM] Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W Reference count 0 Default buffer size 512 Total blocks 16515072 Sectors per track 63 Total cylinders 16384 Tracks per cylinder 16 $ MOUNT/SYSTEM dqa0 OVMSIPS11 Volume is write locked OVMSIPS11 mounted on _MOVMAN$DQA0: $ InfoServer InfoServer> CREATE SERVICE VMS_SIPS_V11 _MOVMAN$DQA0: %INFOSRVR-I-CRESERV, service VMS_SIPS_V11 [ODS-2] created for _MOVMAN$DQA0:. This example shows commands you might enter to create a service for a CD device: o The SHOW DEVICE . . . /FULL command displays a complete list of information about the _MOVMAN$DQA0 CD. o The MOUNT/SYSTEM mounts the OVMSIPS11 volume on the _MOVMAN$DQA0: CD. o The InfoServer CREATE SERVICE command creates the VMS_SIPS_ V11 service on the _MOVMAN$DQA0 CD. 2. $LD CREATE KIT1/SIZE-100000 $DIRECTORY KIT1 Directory DKB0:[DISKS] KIT1.DSK;1 100000/100008 29-APR-2005 14:14:43.49 Total of 1 file, 100000/100008 blocks. $LD CONNECT KIT1 %LD-I-UNIT, Allocated device is MOVMAN$LDA1: $INITIALIZE/SYSTEM MOVMAN$LDA1: kit1 $MOUNT/SYSTEM/NOWRITE MOVMAN$LDA1: kit1 %MOUNT-I-MOUNTED, KIT1 mounted on _MOVMAN$LDA1: $CREATE SERVICE TEST_KIT_1 MOVMAN$LDA1: %INFOSRVR-I-CRESERV, service TEST_KIT_1 [ODS-2] created for _MOVMAN$LDA1: This example shows commands you might enter to create a service for a logical disk (LD) device: o The LD CREATE KIT1 command creates a contiguous file, KIT1, that can be used as a logical disk. o The DIRECTORY KIT1 command provides information about KIT1. o The LD CONNECT KIT1 connects the logical disk file, KIT1, to the logical disk device MOVMAN$LDA1:. o The INITIALIZE command formats the MOVMAN$LDA1: LD device. o The MOUNT command makes the LD device available for processing. o The CREATE SERVICE command creates the TEST_KIT_1 service on the _MOVMAN$LDA1 LD device.