1   SmartArray
	
2   Restriction

        - The MSA_UTIL command "SHOW CONNECTIONS" is not 
          applicable or is not supported on the HP StorageWorks Smart
          Array Controller.
	  
        - Extend, Migrate and Expand commands on Smart Arrays will
          fail if the controller cache is bad or the cache battery is
          less than 75%. These commands will work on controllers that
          are designed to support volume expansion by using disk drives
          for backing up expand data stripe. This is in the absence of
          battery backed memory on the controller.

        - RAID units that have spare disks (RAID 1, RAID 5 and so on)
          cannot be migrated to RAID 0 or JBOD units.

        - Multiple capacity disks can be used by specifying the "/SIZE"
          qualifier. The maximum value of size specified with the "/SIZE"
          qualifier should be the size available on the disk with the
          lowest capacity.


2   Examples

           MSA> SET ADAPTER PKA0:
 
           MSA> SHOW DISKS