1  CONNECT
   Establishes a network connection to a device located on the
   current physical port or specified remote port.

   Format

     CONNECT  device-name[:]
 

2  Parameter
 

device-name[:]

   Optional. Supplies the name of a device through which the network
   connection is made. The device name has the form ddcu where dd
   is the device code, c is the controller designation, and u is the
   unit number. LAN devices are specified as the name of the device
   that is unit 0. For example, the first terminal device on a LAN
   is specified as TTA0, the second as TTB0.
 

2  Qualifiers
   None.
 

2  Example

 PPPD> CONNECT TTA1:
 %PPPD-I-CONNECTTERM, converting connection on device _TTA1: to a
 Point-to-Point connection

     The command in this example creates a temporary network
     connection to the serial port TTA1. The port is ready to
     receive the PPP setup negotiations initiated by the host at
     the other end of the serial connection.